Abstract:Irreversible phase transition and surface residual lithium, which cause the fast capacity fading of LiNi0.8Co0.1Mn0.1O2 (NCM811), are the main obstacles that hinder their commercial application. Herein, to modify the surface/interphase properties of NCM811, we elaborately propose a hybrid Li3PO4-AlPO4-Al(PO3)(3) coating layer that combines the advantages of ionic conductor (Li3PO4) and thermal stable compound (AlPO4) via reacting aluminum metaphosphate (Al (PO3)(3)) precursor with the surface residual lithium (Li2CO3 or/and LiOH) during the coating process. When used as cathode for lithium-ion battery, the optimized NCM811 delivers a high initial discharge capacity of 201.8 mAh g(-1) and 218.9 mAh g(-1) at 0.1C under the temperature of 30 degrees C and 50 degrees C, with capacity retention of 85.4% and 78.89% after 50 cycles, respectively, which are much higher than that of uncoated sample (73.93% and 57.98%). Moreover, when it is coupled with graphite anode to form a lithium-ion full cell, it delivers an impressively high energy density of 467.5 Wh kg(-1) (based on mass of positive and negative material), and retains 71.8% of its initial energy density after 100 cycles. The significantly enhanced electrochemical properties should be attributed to the multifunctional hybrid nano-coating layer that could efficiently reduce the surface residual lithium, suppress the irreversible phase transition, and prevent the active materials from the erosion of HF as verified by the ex-situ X-ray diffractometry, Raman spectroscopy and transmission electron microscopy. This work provides new insights into the surface/interphase design strategies to improve the structural stability of Ni-rich cathode, which will promote the development of high capacity cathode materials.

Hight voltage lithium cobalt phosphate with nitrogen doped carbon coating layer for ultrahigh performance lithium ion battery

Mixed Lithium Ion and Electron Conducting LiAlPO 3.93 F 1.07 -Coated LiCoO 2 Cathode with Improved Electrochemical Performance

Olivine LiFePO4 Nanocrystallites Embedded in Carbon-Coating Matrix for High Power Li-ion Batteries

Surfactant Induced Crystal Regulation and Dual Layer Carbon Coating Formation for Enhanced Performance of High Voltage Olivine-Type Lithium Cobalt Phosphate Cathode Materials

Scalable Precursor-Assisted Synthesis of a High Voltage LiNiyCo1-yPO4 Cathode for Li-Ion Batteries

Improved Electrochemical Performance of LiMn 0.6 Fe 0.4 PO 4 via Chitosan‐Derived Nitrogen‐Doped Carbon Coating

Diammonium Hydrogen Citrate-Assisted Spray Pyrolysis Synthesis of Nanostructured LiCoPO4 Microspheres as High-Voltage Cathode Material for Lithium-Ion Batteries

In-situ Formation of Hybrid Li3PO4-AlPO4-Al(PO3)3 Coating Layer on LiNi0.8Co0.1Mn0.1O2 Cathode with Enhanced Electrochemical Properties for Lithium-Ion Battery

Nickel catalyzed graphitized carbon coated LiFe1-xNixPO4 composites as cathode material for high-performance lithium-ion batteries

Synthesis of Hierarchical and Bridging Carbon-Coated LiMn0.9Fe0.1PO4 Nanostructure As Cathode Material with Improved Performance for Lithium Ion Battery

Study on lithium storage performance of plum-putting-like CoP nanoparticles embedded in N, P co-doped porous carbon

Nano-scale hollow structure carbon-coated LiFePO4 as cathode material for lithium ion battery

Novel porous starfish-like Co3O4@nitrogen-doped carbon as an advanced anode for lithium-ion batteries

Three-dimensional Porous Structure CoP/N-doped Carbon Nanospheres As Anode for Enhanced Lithium Storage Performance

(Keynote) MnPO4-Coating for Improved Long-Term Performance of Li(Ni0.4Co0.2Mn0.4)O2 in Ionic Liquid-Based Electrolytes

Nitrogen-doped Carbon Layer of LiFePO 4 Improves the Electrochemical Performance for Lithium Ion Batteries

A g-C3N4 self-templated preparation of N-doped carbon nanosheets@Co-Co3O4/Carbon nanotubes as high-rate lithium-ion batteries' anode materials

Integrated co-modification of PO43− polyanion doping and Li2TiO3 coating for Ni-rich layered LiNi0.6Co0.2Mn0.2O2 cathode material of Lithium-Ion batteries

Embedding Co2P Nanoparticles in N-Doped Carbon Nanotubes Grown on Porous Carbon Polyhedra for High-Performance Lithium-Ion Batteries

Mechanical alloy coating of LATP decorated porous carbon on LiFe1/3Mn1/3Co1/3PO4/C composite cathode for high-voltage Li-ion battery

Outstanding electrochemical performance of high-voltage LiNi1/3Co1/3Mn1/3O2 cathode achieved by application of LiPO2F2 electrolyte additive