Abstract:ZrCo1-xCux (x = 0–0.3) alloys for hydrogen isotope storage were prepared via induction levitation melting. The effects of partial substitution of Cu for Co on the microstructure, hydrogen storage properties including hydriding-dehydriding kinetics, thermodynamic characteristics, cycling stability and related mechanism have been systematically investigated. It is found that all synthesized alloy ingots consist of ZrCo main phase, the grain size is further refined but the segregation of Cu element at grain boundary is more serious with the increase of Cu content. The pressure-composition isotherms for dehydrogenation show that both ZrCoH3 and ZrCo0.9Cu0.1H3 hydrides undergo one-step desorption, while ZrCo0.8Cu0.2H3 and ZrCo0.7Cu0.3H3 hydrides experience two-step desorption since a new middle hydride phase of ZrCoH0.8 with CrB-type orthorhombic structure is discovered during their dehydrogenation. This result is proposed to be linked with the changed electronic structure and lattice distortion induced by Cu substitution. To compare their dehydriding kinetics, the apparent activation energies for hydrogen desorption of different hydride phases in the alloys are also calculated systematically, and the value of Ea for hydrogen desorption of ZrCoH3 phase is decreased from 118.02 kJ/mol to 95.90 kJ/mol, 77.98 kJ/mol and 78.65 kJ/mol, respectively. Prominent cycling stabilities of the Cu-substituted alloys are obtained and follow the trend: ZrCo0.8Cu0.2 > ZrCo0.7Cu0.3 > ZrCo0.9Cu0.1 > ZrCo. Specifically, the optimum cycling stable capacity of ZrCo-based alloy is increased from 0.4 wt % to 1.21 wt %. Furthermore, the ZrCo0.8Cu0.2 alloy exhibits further enhanced cycling stability during the cycle by controlling cutoff desorption pressure at 0.253 bar, where only the first-step dehydrogenation happens. Therefore, a new strategy for improving anti-disproportionation performance of ZrCo-based alloys by controlling cutoff desorption pressure is also proposed, which is in favor of the enhanced cycling stability and further application of Cu-substituted ZrCo-based alloys for hydrogen isotope storage and delivery in the International Thermonuclear Experimental Reactor (ITER).

Comparative study of Ga and Al alloying with ZrFe2 for high-pressure hydrogen storage

Development of Ti–Zr–Mn–Cr-(V–Fe) Based Alloys for Hydrogen Feeding System in Hydrogen Metallurgy Application

Study on the modification of Zr-Mn-V based alloys for hydrogen isotopes storage and delivery

A new strategy for remarkably improving anti-disproportionation performance and cycling stabilities of ZrCo-based hydrogen isotope storage alloys by Cu substitution and controlling cutoff desorption pressure

Binding Energy Crossover Mechanism Enables Low-Temperature Hydrogen Storage Performance of Dual-Phase TiZrCrMnNi(VFe) High-Entropy Alloy

Enhancing Disproportionation Resistance of Zr2Co-based Alloys by Regulating the Binding Energy of H Atom

Improvement on the Kinetic and Thermodynamic Characteristics of Zr1-xNbxCo (x = 0–0.2) Alloys for Hydrogen Isotope Storage and Delivery

A review of classical hydrogen isotopes storage materials

Hydrogen storage alloys for high-pressure suprapure hydrogen compressor

Low-cost Vanadium-Free Ti–Zr–Cr–Mn–Fe Based Alloys for Metal Hydride Hydrogen Compressor under Mild Conditions

Study on hydrogen storage property of (ZrTiVFe) Al high-entropy alloys by modifying Al content

Influence of Fe Content on the Microstructure and Hydrogen Storage Properties of Ti16Zr5Cr22V57−xFex (x = 2–8) Alloys

Study on low-vanadium Ti–Zr–Mn–Cr–V based alloys for high-density hydrogen storage

Microstructure and hydrogen storage properties of Ti10V84-xFe6Zrx (x = 1-8) alloys

Development of Ti-Zr-Mn-Cr-V based alloys for high-density hydrogen storage

Development of (Ti–Zr) 1.02 (Cr–Mn–Fe) 2 -Based Alloys toward Excellent Hydrogen Compression Performance in Water-Bath Environments

Hydrogen storage capabilities of the alloys Fe 0.85Mn 0.15Ti 0.9M 0.1 (M=Zr, V, Ca)

Investigation of Ti0.92+xZr0.1−xCr1.0Mn0.6Fe0.4 Alloys for Use as 25 MPa Hydrogen Compression Materials

Study on Rare Earth Based Hydrogen Storage Alloy for High-pressure Metal Hydride Hydrogen Compressor

A study on 70MPa metal hydride hydrogen compressor

Microstructure and hydrogen storage properties of Ti10+xV80-xFe6Zr4 (x=0~15) alloys