Abstract:BACKGROUND:Conventional approaches of making a flexible circuit are generally complex, environment unfriendly, time and energy consuming, and thus expensive. Here, we describe for the first time the method of using high-performance GaIn(10)-based electrical ink, a significantly neglected room temperature liquid metal, as both electrical conductors and interconnects, for directly writing flexible electronics via a rather easy going and cost effective way.METHODS:The new generation electric ink was made and its wettability with various materials was modified to be easily written on a group of either soft or rigid substrates such as epoxy resin board, glass, plastic, silica gel, paper, cotton, textiles, cloth and fiber etc. Conceptual experiments were performed to demonstrate and evaluate the capability of directly writing the electrical circuits via the invented metal ink. Mechanisms involved were interpreted through a series of fundamental measurements.RESULTS:The electrical resistivity of the fluid like GaIn(10)-based material was measured as 34.5 µΩ·cm at 297 K by four point probe method and increased with addition of the oxygen quantity, which indicates it as an excellent metal ink. The conductive line can be written with features that are approximately 10 µm thick. Several functional devices such as a light emitting diode (LED) array showing designed lighting patterns and electrical fan were made to work by directly writing the liquid metal on the specific flexible substrates. And satisfactory performances were obtained.CONCLUSIONS:The present method opens the way to directly and quickly writing flexible electronics which can be as simple as signing a name or drawing a picture on the paper. The unique merit of the GaIn(10)-based liquid metal ink lies in its low melting temperature, well controlled wettability, high electrical conductivity and good biocompability. The new electronics writing strategy and basic principle has generalized purpose and can be extended to more industrial areas, even daily life.

Flexible Electronics Directly Written with an Ultrastable Ballpoint Pen Based on a Graphene Nanosheets/MWCNTs/Carbon Black Nanocomposite

Direct Ink Writing of Flexible Electronics on Paper Substrate with Graphene/Polypyrrole/Carbon Black Ink

Highly conductive carbon-based aqueous inks toward electroluminescent devices, printed capacitive sensors and flexible wearable electronics

Rollerball-Pen-Drawing Technology for Extremely Foldable Paper-Based Electronics

Fabrication of paper-based conductive patterns for flexible electronics by direct-writing

One-pot ball-milling preparation of graphene/carbon black aqueous inks for highly conductive and flexible printed electronics

Pervasive Liquid Metal Based Direct Writing Electronics with Roller-Ball Pen

Surfactant-free carbon black@graphene conductive ink for flexible electronics

Optimization of Graphene Conductive Ink with 73 wt% Graphene Contents

Pervasive liquid metal direct writing electronics with roller-ball pen

Preparation of stable aqueous conductive ink with silver nanoflakes and its application on paper-based flexible electronics

Flexible Solid State Lithium Batteries Based on Graphene Inks

Inkjet printed flexible electronics on paper substrate with reduced graphene oxide/carbon black ink

Fully Written Flexible Potentiometric Sensor Using Two-Dimensional Nanomaterial-Based Conductive Ink

Highly conductive graphene/carbon black screen printing inks for flexible electronics

Direct Writing of Flexible Electronics Through Room Temperature Liquid Metal Ink.

High-conductivity graphene/carbon black inks via interpenetrating networks for wearable fabric-based heaters and strain sensors

High conductivity and transparency of graphene-based conductive ink: Prepared from a multi-component synergistic stabilization method

Screen-Printing of a Highly Conductive Graphene Ink for Flexible Printed Electronics

Water-based and inkjet printable inks made by electrochemically exfoliated graphene