Abstract:The issue of thermal control for space missions has been critical since the early space missions in the late 1950s. The demands in such environments are heightened, characterized by significant temperature variations and the need to manage substantial densities of heat. The current work offers a comprehensive survey of the innovative materials and thermal fluids employed in the aerospace technological area. In this scope, the materials should exhibit enhanced reliability for facing maintenance and raw materials scarcity. The improved thermophysical properties of the nanofluids increase the efficiency of the systems, allowing the mass/volume reduction in satellites, rovers, and spacecraft. Herein are summarized the main findings from a literature review of more than one hundred works on aerospace thermal management. In this sense, relevant issues in aerospace convection cooling were reported and discussed, using heat pipes and heat exchangers, and with heat transfer ability at high velocity, low pressure, and microgravity. Among the main findings, it could be highlighted the fact that these novel materials and fluids provide enhanced thermal conductivity, stability, and insulation, enhancing the heat transfer capability and preventing the malfunctioning, overheating, and degradation over time of the systems. The resulting indicators will contribute to strategic mapping knowledge and further competence. Also, this work will identify the main scientific and technological gaps and possible challenges for integrating the materials and fluids into existing systems and for maturation and large-scale feasibility for aerospace valorization and technology transfer enhancement.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is the thermal control problem in space missions. Since the early space missions in the late 1950s, thermal control has been a key issue in space missions. The space environment imposes higher requirements on the thermal management system, including significant temperature changes and the need to manage a large amount of heat flux density. Specifically, this paper aims to review new heat - transfer materials and fluids for aerospace applications. These materials and fluids should have the following characteristics: 1. **Enhanced reliability**: To deal with maintenance and raw material scarcity issues. 2. **Improved thermophysical properties**: For example, the use of nanofluids can improve the efficiency of the system, allowing for the reduction of the mass and volume of satellites, rovers and spacecraft. 3. **Efficient heat conduction, stability and heat - insulation properties**: To prevent the system from overheating, malfunctioning and degrading over time. By summarizing the main findings of more than 100 related literatures, this paper discusses relevant issues in aerospace convective cooling, especially the heat - transfer capabilities of using heat pipes and heat exchangers under high - speed, low - pressure and microgravity conditions. In addition, this paper also identifies the major scientific and technological gaps and challenges in integrating these new materials and fluids into existing systems, and explores their large - scale feasibility and potential for technology transfer. ### Main problem summary - **Extreme temperature changes**: The temperature fluctuations of spacecraft between solar radiation and shadow areas are extremely large. - **Specific cooling requirements**: For example, the cooling requirements of microchips and electronic devices. - **Isolation of combustion areas**: Ensure that the heat generated by combustion does not spread throughout the spacecraft. - **Weight and space limitations**: Achieve effective thermal control under strict space and weight constraints. - **Need for efficient heat - transfer materials and fluids**: Improve heat - exchange efficiency and reduce system mass and volume. By solving these problems, this paper provides a strategic knowledge map and further capacity - enhancement directions for future research.

A Review of Novel Heat Transfer Materials and Fluids for Aerospace Applications

A review of technologies of temperature-adjustable heat sink

Experimental Investigation on Flow and Convective Heat Transfer Feature of A Nanofluid for Aerospace Thermal Management

Experimental Investigation on Thermal Conductivity and Viscosity of Enhanced Heat Transfer Process Fluids for Aerospace

A new heat carrier for thermal management of spacecrafts

Recent Developments on the Thermal Properties, Stability and Applications of Nanofluids in Machining, Solar Energy and Biomedicine

Numerical Simulation of Heat Pipe Thermal Performance for Aerospace Cooling System Applications

Aero Heating Optimization of a Hypersonic Thermochemical Non-Equilibrium Flow around Blunt Body by Application of Opposing Jet and Blunt Spike

Nanofluid two-phase flow and thermal physics: a new research frontier of nanotechnology and its challenges

Review on Heat Conduction, Heat Convection, Thermal Radiation and Phase Change Heat Transfer of Nanofluids in Porous Media: Fundamentals and Applications

A Review of Working Fluids and Flow State Effects on Thermal Performance of Micro-Channel Oscillating Heat Pipe for Aerospace Heat Dissipation

Enhanced Heat Transfer Behaviors of New Heat Carrier for Spacecraft Thermal Management

Nanofluids as a Waste Heat Recovery Medium: A Critical Review and Guidelines for Future Research and Use

Advanced High-Temperature Structural Materials for Aerospace and Power Sectors: A Critical Review

Fabrication and Application of Microchannels Heat Sinks in Aerospace Areas

Flow Mechanics in Ablative Thermal Protection Systems

Review on Nano-Fluids Applications and Heat Transfer Enhancement Techniques in Different Enclosures

Review of research on heat pipe heat exchanger using nanofluids

Carbon-Based Nanofluids and Their Advances towards Heat Transfer Applications-A Review

Sustainable space technologies—Strategies toward a predictive aerothermal design of re-useable space transportation systems

Heat Transfer with Interface Effects in High-Enthalpy and High-Speed Flow: Modelling Review and Recent Progress