Abstract:Cyclone separators, which have an important role in the recovery of catalysts, constituted one of the aims of the study. In the work to be done, the pressure drop occurring during the fcc reaction is also calculated using the Ergun equation and it is aimed to provide the same value in a cyclone separator. In this study, which was presented for the first time in the literature, the best working conditions were determined by simulating the pressure drop in the cyclone separator modeled by using the various catalyst types namely NiMo/ASA–Al 2 O 3 , NiMo/p–Al 2 O 3 , NiMo/Y–Al 2 O 3 , Co-Mo, HZSM-5 zeolite, HY zeolite, pAl 2 O 3 , ASA-Al 2 O 3 , Y-Al 2 O 3 determined from the literature in the Ergun equation. Among them, NiMo/ASA Al 2 O 3 , Co-Mo, HY zeolite, and ASA-Al 2 O 3 were determined as the best catalyst for producing diesel from high oil fractions. Unlike previous studies, the condition that the cyclone separator modeled cleans the catalyst with maximum efficiency also determines the condition that provides low catalyst porosity in the determination of the catalyst type to be determined in diesel production. Due to the accuracy between the calculated and the predicted pressure drop results (about 1,8%), HY zeolite is the best catalyst for cyclone separator geometry. It is widely used to convert high molecular weight hydrocarbon fractions, the high boiling point of petroleum crude oils into olefinic gases, more valuable gasoline, and other products. The purpose of the FCC unit is to increase the refinery conversion and white product yield by converting heavy vacuum gas oil (HVGO) into light hydrocarbons at high temperatures with the aid of fluid catalysis. These two zones (reactor and regenerator) are placed as two different pressure vessels. For these two different systems to work in harmony with each other, unlike in previous studies, the "dense discreet phase-Eularian" approach was used in the modeling of the catalytic unit and the "discreet phase" approach was used in the modeling of the cyclone separator. The values required for both processes to work together have been determined approximately.

Effects of the properties of FCCS on the removing of catalyst particles from FCCS under a DC electrostatic field

Separation of Catalytic Powder from FCC Slurry Oil by Solvent Extraction and Filtration

A CFD Modeling of the Gas–solid Two‐phase Flow in an FCC Riser under the Electrostatic Conditions

Removal of catalyst particles in the fluid catalytic cracking slurry oil by chemical settling in a rotating packed bed

Study on the flow and collision characteristics of catalyst particles in FCC reactor

Effect of the Microstructure of Support Materials on Cracking Catalyst Performance

Numerical and Experimental Study on the Removal of Catalyst Particles from Oil Slurry by Hydrocyclone

Preparation And Cracking Performance Of Fcc Co-Catalyst For Enhancing Light Oil Production

Research on the aromatics enrichment and solid particles removal during slurry oil fluidized thermal conversion

Prediction of molecular distribution and temperature profile of FCC process through molecular-level kinetic modeling

Evaluating the Role of Intraparticle Mass and Heat Transfers in a Commercial FCC Riser: A Meso-Scale Study

Developing an adaptive catalyst for an FCC reactor using a CFD RSM, CFD DPM, and CFD DDPM–EM approach

Catalyst deactivation and the effect of catalyst makeup on the FCC unit

Modeling and Optimization of a Fractionation, Absorption, and Stabilization System in an Industrial Fluid Catalytic Cracking Process

Experimental and Numerical Investigations on Heterogeneous Condensation of Insoluble Particles in the Fluid Catalytic Cracking Unit

REVAMPING OF FCC UNIT WITH CSC RAPIDSEPARATION TECHNOLOGY

CFD–DEM Simulation of Gas–solid Reacting Flows in Fluid Catalytic Cracking (FCC) Process

Upgrading FCC Gasoline Through Adsorption Separation of Normal Hydrocarbons

Study on the FCC process of a novel riser-downer coupling reactor (III): Industrial trial and-CFD modeling

Study on the Integration of Fluid Catalytic Cracking Unit in Refinery with Solvent-Based Carbon Capture Through Process Simulation

From Waste to Best: Excellent Desulfurization Performance of Spent FCC Catalyst