Design and analysis of a small size triple band printed antenna for 3G/4G/5G/future 5.8G IoT applications
Tapan Mandal,Pratik Mondal
DOI: https://doi.org/10.1002/dac.5797
2024-04-26
International Journal of Communication Systems
Abstract:This paper presents a small triple band monopole antenna for Internet of Things (IoT) applications. The geometry of the proposed antenna consists of monopole element with feed line, stubs, and improved ground plane to obtain three independent operating bands for industrial, scientific, and medical (ISM)/3G, 4G/5G, and Wi‐Fi/extended 5G. The antenna has been realized, and experimental results are found to be satisfactory with close proximity to the simulated one, which ensures its ability to work for various IoT portable applications in modern communication system. Summary This paper presents a compact (20 × 20 × 1.59 mm3), (0.34λg × 0.34λg × 0.01λg at 2.4 GHz) triple band monopole antenna for Internet of Things (IoT) applications. The geometry of the antenna consists of (i) U‐shape monopole with feed line, (ii) stubs, and (iii) modified ground to achieve three independent operating bands ranging from (i) 2.4–2.48 GHz for industrial, scientific, and medical (ISM)/3G; (ii) 3.4–3.6 GHz for 4G/5G; and (iii) 5.725–5.825 GHz for 5.8G Wi‐Fi/extended 5G. Various parameters, input impedance, and current distribution of the proposed structure are carried out to investigate the effects of stub, ground plane and analyze the radiation. The measured result covers the three individual bands in range of 2.38–2.48 GHz, 3.41–3.61 GHz, and 5.76–6.04 GHz, respectively, and exhibits stable omnidirectional radiation patterns, acceptable antenna gain, and efficiency in the operating bands. The experimental result of the fabricated antenna closely matches with the simulated result. Therefore, satisfactory result ensures its ability to work for 3G/4G/5G/extended 5G IoT portable applications.
telecommunications,engineering, electrical & electronic