Broadband generation of a multi-polarization multi-beam using a receiving-transmitting metasurface

Wen-Long Guo,Fang Yuan,He-Xiu Xu

DOI: https://doi.org/10.1364/oe.525152

IF: 3.8

2024-05-17

Optics Express

Abstract:Wen-Long Guo, Fang Yuan, He-Xiu Xu Generating multiple beams in distinct polarization states is promising in multi-mode wireless communication but still remains challenging ... [Opt. Express 32, 20119-20127 (2024)]

optics

What problem does this paper attempt to address?

Switchable Phase and Polarization Singular Beams Generation Using Dielectric Metasurfaces

Yanliang He,Ying Li,Junmin Liu,Xiaoke Zhang,Yao Cai,Yu Chen,Shuqing Chen,Dianyuan Fan

DOI: https://doi.org/10.1038/s41598-017-07217-5

IF: 4.6

2017-01-01

Scientific Reports

Abstract:Singular beams which possess helical phase wavefront or spatially inhomogeneous polarization provide new freedom for optical field manipulation. However, conventional schemes to produce the singular beams have difficulty in realizing the flexible switch between different singular beams. In this work, we have experimentally demonstrated the capability of dielectric metasurfaces to generate three types of singular beams and switch between them at working wavelength of 1550 nm . We have shown vortex beam and cylindrical vector beam generation with single metasurface and cylindrical vector vortex beam generation with two cascaded metasurfaces. Moreover, experimental demonstration on switching cylindrical vector beam into vortex beam has also been done by combining one quarter-wave plate and a Glan laser polarizer. The experimental results match well with the analysis from the Jones matrix calculations. The average conversion efficiency of cylindrical vector beam to vortex beam was estimated to be 47.7%, which was about 2.3% lower than the theoretical prediction.
Generation of Polarization Rotation Function Bessel Beams Based on All-Dielectric Metasurfaces

Jiahao Zhi,Yuncheng Guo,Bo Hu,Xiaogang Wang,Xinning Yu,Zhifang Qiu,Kaikai Huang,Min Yao,Bijun Xu

DOI: https://doi.org/10.1016/j.optcom.2023.130014

IF: 2.4

2024-01-01

Optics Communications

Abstract:Bessel beams have a wide range of applications in optical communications because their non-diffractive properties do not depend on the amplitude and phase distribution in the spatial frequency range. Recently, metasurfaces have been widely utilized as subwavelength materials for light manipulation, including the generation of Bessel beams. However, so far, no reports of metasurfaces generating Bessel beams with polarization rotation function have been published, which has potential applications for information encryption in optical communication. An all-dielectric metasurface based on the Pancharatnam-Berry (PB) phase is proposed to realize the generation of a Bessel beam with polarization rotation function under the incident of linearly polarized (LP) light. Furthermore, we exhibit dual Bessel beams with orthogonal polarization states through the superimposition of two Bessel beam phases onto a metasurface, with different polarization rotation angles and phase gradients. Our final demonstration illustrates Bessel beam arrays with polarization rotation, and this design concept can be extended to more channels and higher-order Bessel beams. The proposed all-dielectric metasurfaces based on polarization rotation function provides a new option for the application of Bessel beams in integrated optical systems and multiplexing.
Polarization-Insensitive Metasurface with High-Gain Large-Angle Beam Deflection

Huanran Qiu,Liang Fang,Rui Xi,Yajie Mu,Jiaqi Han,Qiang Feng,Ying Li,Long Li,Bin Zheng

DOI: https://doi.org/10.3390/ma17235688

IF: 3.4

2024-01-01

Materials

Abstract:Metasurfaces have shown great potential in achieving low-cost and low-complexity signal enhancement and redirection. Due to the low transmission power and high attenuation issues of current high-frequency communication technology, it is necessary to explore signal redirection technology based on metasurfaces. This paper presents an innovative metasurface for indoor signal enhancement and redirection, featuring thin thickness, high gain, and wide-angle deflection. The metasurface integrates the design principles of a Fabry–Perot cavity (FPC) theory with a Phase Gradient Partially Reflective Metasurface (PGPRM). Its unit is a fishnet structure with a substrate only 1/33 λ thin. Based on the precise phase control of the dual-layer PGPRM (with an inter-layer distance of 8 mm), the proposed metasurface can obtain phase coverage as small as 78° while achieving high-gain beam deflection as large as 47°. Simulation results show that within the band 8.6–9.2 GHz (6.7%), a single-layer metasurface can deflect the beam to 29° with a maximum gain of 16.9 dBi. In addition, it is also 360° polarization-insensitive in the xoy plane at 9 GHz with large-angle deflection characteristic retained. Moreover, cascading PGPRM can effectively improve the beam deflection angle. After analysis, the scheme with a double-layer spacing of 8 mm was ultimately selected. Simulation results show a double-layer metasurface can deflect the beam to 47° with a maximum gain of 16.4 dBi. This design provides an efficient and cost-effective solution for large-angle beam deflection with gain enhancement for indoor wireless communication.
A Broadband Dual-Polarized Reflective Metasurface for THz OAM Communication

Nan Li,Shilie Zheng,Hang Yang,Tong He,Donghui Shen,Hongqi Zhang,Zuomin Yang,Zhidong Lyu,Lu Zhang,Xianbin Yu

DOI: https://doi.org/10.1109/tmtt.2023.3300193

IF: 4.3

2024-01-01

IEEE Transactions on Microwave Theory and Techniques

Abstract:Terahertz (THz) beams with abundant spectrum resources and low beam divergence can be combined with orbital angular momentum (OAM) beams characterized by orthogonal propagation to multifold the capacity of wireless communication systems. However, in order to support the explosive growth of massive communication data traffic, THz OAM must be further enhanced with other multiplexing technologies. Therefore, it is imperative to develop new multifunctional devices. In this article, we propose a novel broadband dual-polarized reflective metasurface, which can generate two coaxially propagating OAM beams with distinct modes for each polarization. Because of the geometric symmetry, the metasurface shows the same electromagnetic response with respect to both x -and y -polarized waves, thus possessing the dual-polarized property. Simulated and measured results verify that the metasurface can realize the incorporation of OAM multiplexing and polarization multiplexing in a broad frequency range of 90–110 GHz. The crosstalks from other OAM modes and polarizations are lower than $-$ 16 dB and $-$ 21 dB, respectively. Based on the metasurface, a THz wireless communication system was demonstrated by multiplexing four independent OAM beams with each channel carrying a 6-Gbaud quaternary phase shift keying (QPSK) signal, so that an aggregate 48 Gbit/s data transmission with bit error rate (BER) below 3.8e-3 was achieved. This work verifies the feasibility of metasurface for multidimensional multiplexing in the THz region, meaning the metasurface may serve as a promising candidate for ultrahigh speed THz communication systems.
Generation of scalar and vector beams with longitudinally varying polarization based on all-silicon metasurfaces

Wei Wang,Jun Wang,Qiaohua Wu,Tian Zhang,Jie Lin,Peng Jin,Shutian Liu,Keya Zhou

DOI: https://doi.org/10.1088/1402-4896/ad8319

2024-10-04

Physica Scripta

Abstract:Beams with longitudinally continuously varying polarization provide a new application dimension in fields such as optical communication and optical manipulation. The small-sized and multifunctional metasurfaces have been used to generate scalar or vector beams whose polarizations vary along the propagation direction within a single polarization mode. However, dual-mode beams with longitudinally varying polarization can further increase the dimension of manipulation, but they have been rarely explored. Here, we propose a scheme based on the spatial partitioning method for designing dual-mode beams with longitudinally evolving polarization. To validate the proposed scheme, we demonstrate three dual-mode beams generated by all-silicon metasurfaces which have evolving polarization from scalar to vector, scalar vortex to vector vortex, and first-order to second-order cylindrical vector, respectively. The transverse polarization distributions of these beams depend on their longitudinal position. The different focal lengths of the orthogonal circularly polarized components and the design of long focal depth make it possible to change the polarization distribution longitudinally. The optical fields generated based on the proposed scheme are expected to be applied in depth detection and optical manipulation.

physics, multidisciplinary
Generation of Multi-beam Bessel Beams Using a wideband Metasurface based on Spin-decoupled Principle

Chu-Xin Zheng,Hui‐Fen Huang

DOI: https://doi.org/10.1109/ICMMT58241.2023.10276673

2023-05-14

Abstract:In this paper, a double-layer reflection metasurface (MS) based on the spin-decoupled principle is used to simultaneously generate Bessel beams with different circular polarized. The bandwidth of the unit designed covers 14-22GHz, with high bandwidth. And Multi-beam Bessel beams were produced at 16GHz. The simulation results show that the generated Bessel beams can maintain diffraction-free with 700mm. The results show that the proposed method of generating Bessel beams has wide potential in imaging and wireless communication.

Physics,Engineering
Broadband Reflection-Type Metasurface for OAM Antenna Design

Dong-Hao Han,Xun-Wang Zhao,Xing-Chang Wei

DOI: https://doi.org/10.1109/apemc53576.2022.9888592

2022-01-01

Abstract:Generating orbital angular momentum (OAM) carried by vortex beams in a broad bandwidth is imperative for communication systems. In this paper, we proposed a low-profile and wide-band metasurface to generate high-purity vortex beams by combining the polarization converter and the resonant phase. In addition, it is applicable for Linearly Polarized (LP) incident wave and Circularly Polarized (CP) incident wave. The metasurface consisting of 10 × 10 elements is used to generate vortex beam with mode l = 1. Simulation results at 15 GHz verify the feasibility of this method, which paves a new way for generating vortex beams.
A Reflective Metasurface for OAM and Polarization Multiplexing Communication in the W-band

Hang Yang,Shilie Zheng,Hongqi Zhang,Tong He,Nan Li,Zuomin Yang,Zhidong Lyu,Yuqian He,Lu Zhang,Xianbin Yu

DOI: https://doi.org/10.1109/lawp.2023.3345935

IF: 4.2

2023-01-01

IEEE Antennas and Wireless Propagation Letters

Abstract:In this letter, a reflective metasurface for orbital angular momentum (OAM) and polarization multiplexing communication is proposed in the W-band. To realize OAM and polarization multiplexing communication, not only the design principle of the metasurface is studied, but also the reflective unit capable of being modulated in two polarizations and working in broad bandwidth is designed. Experimental results show that it can generate the multiplexed OAM beams in two polarizations with high mode purities. After measuring the great isolation performance provided by different OAM modes and polarizations, the four generated beams are employed as multiplexing channels to transmit the communication signals with quadrature phase shift keying format, and the data rate reaches 64 Gb/s at last. With the assistance of metasurface, OAM multiplexing technology has shown great potential in large-capacity wireless communication.
Microwave Band Polarization-Decoupled Multi-Structured Waves Generation Metasurface

Yuda Wu,Li Deng,Lijie Chen,Wenqing Liu

DOI: https://doi.org/10.1109/lpt.2024.3427809

IF: 2.6

2024-07-26

IEEE Photonics Technology Letters

Abstract:The microwave band exhibits structured beams, such as orbital angular momentum (OAM) beams and Airy beams, which have attracted the interest of many researchers. However, most structured microwave generation arrays can only produce a single type of beam. This study proposes a three-functional multiplexing metasurface based on the principles of circular polarization decoupling and Pancharatnam-Berry (PB) phase. At 10.5 GHz, when illuminated by different circular polarized (CP) waves, this metasurface generates output waves that can separate OAM beams, spiral beams, and self-focusing Airy beams based on their polarization states. This metasurface holds broad applications in high-performance near-field wireless communications.

engineering, electrical & electronic,optics,physics, applied
Generation of Terahertz Beam with Longitudinally Varied Polarization State Via Coherent Superposition Based on Metasurface

Li Luo,Xiao Liu,Sui Peng,Bo Liu,Yuting Wang,Lingzhi Wang,Yuxin Zou,Ling Zhou,Jie Li,Yudong Pan,Jin He,Jianquan Yao

DOI: https://doi.org/10.1364/oe.530340

IF: 3.8

2024-01-01

Optics Express

Abstract:Polarization is an important dimension in the research and applications of light waves. However, traditional polarization optics often only focus on the polarization characteristics in the transverse plane. Here, we demonstrate a new scheme for the generation of longitudinally varied polarization state in terahertz beam using all-silicon metasurface. We employ wavefront transformation designs with long-focal-depth for orthogonal circularly polarized terahertz waves, achieving varied amplitude and phase along the propagation direction in opposite spin states. Based on the principle of coherent superposition of polarized waves, different linear and elliptical polarization states are obtained in transverse planes along the propagation path, with variable ellipticity and azimuth angle. Simulation results show that a large-scale evolution of the elliptical polarization azimuth angle from 45 degrees to -60 degrees and ellipticity from 20 degrees to -74 degrees can be observed within a focal depth range of 0.45-0.8 mm. We also intuitively display the helical trajectory of the polarization state from left-hand elliptical ones to right-hand elliptical ones within the focal depth range, using the Poincar & eacute; sphere. This work expands the application of metasurface devices for multifunctional polarization devices and can be applied to polarization generation and transformation for optical imaging or terahertz communications.
Broadband Wireless Communication with Space-Time-varying Polarization-Converting Metasurface

Qi Hu,Ke Chen,Yilin Zheng,Zhiyuan Xu,Jianmin Zhao,Jian Wang,Yijun Feng

DOI: https://doi.org/10.1515/nanoph-2023-0027

IF: 7.5

2023-01-01

Nanophotonics

Abstract:Reconfigurable metasurfaces have emerged as a promising alternative to the conventional transmitter of wireless communication systems, due to their abilities of encoding digital information onto electromagnetic properties without complex radio-frequency chains. However, most of them are still limited to narrow operation bandwidth. Here, we propose a broadband metasurface-based wireless communication system that can actively adapt to multiple users located at versatile directions through joint modulation of digital signals in the time domain and wave scatterings in the space domain. As exemplary demonstrations, highly directive beams are generated to enhance regional signals in real-time customized for users in desired directions and reduce the signal leakage in undesired directions. Experiments are carried out to verify that the system can provide stable wireless communication service in a broad band of 3.7–5.1 GHz, within which the transmitted color picture enabled by the time-varying spatial modulation of metasurface can be successfully recovered at the user terminals. The proposed system may offer untapped potentials for next-generation communications and radar systems where regional signal enhancement, active adaption to users, and large channel capacities are required.
Independent and Free Control of Multiple Beams Enabled by Wideband Spin‐Decoupled Metasurface

Fengxia Li,Xiaohan Yin,Jia‐Yuan Yin,Jing‐Ya Deng

DOI: https://doi.org/10.1002/adom.202401777

IF: 9

2024-12-01

Advanced Optical Materials

Abstract:A spin‐decoupled strategy is proposed by Fengxia Li and co‐workers, it is used to generate multiple beams based on polarization conversion meta‐atom by regulating its cross‐polarized components. The deflection angles, polarization, and modes can be independently and freely controlled in wideband, which can be utilized for polarization multiplexing and multichannel meta‐devices in communication, imaging, and target detection. Pancharatnam–Berry (PB) phase is typically employed to control circularly polarized (CP) waves, but it has spin‐locked limitations due to its conjugate phase response to different spins. Recently, by modulating both propagation and PB phases, spin‐decoupled metasurfaces have attracted much attention. Most of these spin–decoupled metasurfaces are realized by regulating co‐polarized components, which need N meta‐atoms to achieve a 360° phase coverage. However, this research on wideband high‐efficiency spin‐decoupled metasurfaces based on polarization conversion meta‐atoms by adjusting cross‐polarized components is still lacking. Compared with the regulation of co‐polarized components, only N/2 meta‐atoms are needed for the regulation of cross‐polarized components, which greatly reduces the design difficulty. Here, two spin‐decoupled metasurfaces are proposed for the generation of multiple vortex beams and pencil beams, which exhibit broadband and high‐efficiency performance at the frequency range of 9–21 GHz. This work has the potential to significantly promote the development of wideband polarization multiplexing and multichannel meta‐devices, with various applications in cyberspace security, wireless communication, imaging, and target detection.

materials science, multidisciplinary,optics
Dual-mode vortex beam transmission metasurface antenna based on linear-to-circular polarization converter

Ziyue Wang,Dongfang Zhou,Qikun Liu,Mengyao Yan,Xian Wang

DOI: https://doi.org/10.1364/OE.497017

2023-10-23

Abstract:The generation of multi-mode vortex beams at the same aperture is currently emerging as a research hotspot. In this paper, a method based on a linearly polarized-circularly polarized translational transmission metasurface (TM) is proposed to enable a dual-circularly polarized dual-mode vortex beam generation. Through the judicious implementation of an additional rotational phase and the combination of the initial transmission phase, the phases of the left-hand circularly polarized (LHCP) and right-hand circularly polarized (RHCP) waves can be manipulated arbitrarily and independently. Meanwhile, the design of the array phase is utilized for the dual-mode dual-circularly polarized beam generation. Simulation and sample measurements provide validation data for the feasibility of this method, in which the measurement results are in excellent consistency with the simulation ones. This proposed method paves the way toward the enhancement of the channel capacity of mobile communication.
Broadband generation of perfect Poincaré beams via dielectric spin-multiplexed metasurface

Mingze Liu,Pengcheng Huo,Wenqi Zhu,Cheng Zhang,Si Zhang,Maowen Song,Song Zhang,Qianwei Zhou,Lu Chen,Henri J Lezec,Amit Agrawal,Yanqing Lu,Ting Xu

DOI: https://doi.org/10.1038/s41467-021-22462-z

2021-04-13

Abstract:The term Poincaré beam, which describes the space-variant polarization of a light beam carrying spin angular momentum (SAM) and orbital angular momentum (OAM), plays an important role in various optical applications. Since the radius of a Poincaré beam conventionally depends on the topological charge number, it is difficult to generate a stable and high-quality Poincaré beam by two optical vortices with different topological charge numbers, as the Poincaré beam formed in this way collapses upon propagation. Here, based on an all-dielectric metasurface platform, we experimentally demonstrate broadband generation of a generalized perfect Poincaré beam (PPB), whose radius is independent of the topological charge number. By utilizing a phase-only modulation approach, a single-layer spin-multiplexed metasurface is shown to achieve all the states of PPBs on the hybrid-order Poincaré Sphere for visible light. Furthermore, as a proof-of-concept demonstration, a metasurface encoding multidimensional SAM and OAM states in the parallel channels of elliptical and circular PPBs is implemented for optical information encryption. We envision that this work will provide a compact and efficient platform for generation of PPBs for visible light, and may promote their applications in optical communications, information encryption, optical data storage and quantum information sciences.
Generation of broadband terahertz focused vector beam using multifunctional metasurface

Yun Li,Fang Ling,Zheqiang Zhong,Bin Zhang

DOI: https://doi.org/10.1016/j.optmat.2022.112700

IF: 3.754

2022-07-12

Optical Materials

Abstract:Focused vector beams are special beams with spatially inhomogeneous polarization distribution, which have broad application prospects in photonics applications such as high-resolution imaging, communications, and optical sensing. Recently, multifunctional metasurfaces for generating focused vector beams have attracted great interest due to their highly integratable, miniaturized, and compact properties. However, in terahertz (THz) range, related research remains largely unexplored. In this paper, a multifunctional broadband metasurface with an all-dielectric structure is proposed for generating focused vector beams in the terahertz region, enabling efficient linear polarization conversion and complete phase control of the transmitted field. Without the help of a polarization diversity scheme, this planar focused vector beam metasurface (FVBM) can simultaneously convert x- and y -polarized incident beams into focused radially polarized (RP) and azimuthally polarized (AP) beams, respectively. The simulation results show that the proposed metasurface exhibits excellent average conversion efficiencies (CEs) higher than 85.47% and 80.94% in the frequency range of 1.7 THz - 2.0 THz under linear x -polarized and y -polarized excitation, respectively. At 1.85 THz, the proposed metasurface can focus RP and AP beams with focusing efficiencies of 70.25% and 69.88%, respectively. The proposed metasurface has potential applications in integrating multiple functionalities into single, compact and ultrathin terahertz devices.

materials science, multidisciplinary,optics
Dual-polarization reconfigurable metasurface for broadband vortex beam generation

Ruifeng Xie,Yanxun Wang,Xiaoliang Ma,Jiahao Huang,Ke Cheng,Lin Zhang,Zhe Zhang,Taiping Zhang

DOI: https://doi.org/10.1364/oe.537926

IF: 3.8

2024-10-09

Optics Express

Abstract:Ruifeng Xie, Yanxun Wang, Xiaoliang Ma, Jiahao Huang, Ke Cheng, Lin Zhang, Zhe Zhang, Taiping Zhang Recently, reconfigurable metasurfaces integrated with adaptable devices have demonstrated exceptional dynamic controllability across ... [Opt. Express 32, 38087-38096 (2024)]

optics
A Broadband Double-Lined Metasurface for Simultaneous Generation of Inverse Functions

Zongkun Zhang,Ming-Zhe Chong,Jin Zhao,Yueyi Zhang,Pu-Kun Liu

DOI: https://doi.org/10.1109/acp/poem59049.2023.10369799

2023-01-01

Abstract:Plasmonic metasurfaces have shown great potential to manipulate the electromagnetic fields within the subwavelength scale. Nanoslits are one type of the commonly used building blocks of metasurfaces. In this paper, through controlling the orientation angles of two separated slits under 90° linear polarization incidence, the wavefront of the excited surface plasmon polaritons (SPPs) can be freely manipulated. More importantly, the SP profiles on the two sides keep inverse in a broadband regime. For verification of the proposed design rule, this paper demonstrates two terahertz structures by CST simulation and theoretical calculation. The profiles on the two sides are focusing (deflecting) and diverging (opposite deflecting) respectively. Our work explores one new plasmonic function, providing ideas for the further implementation of arbitrary field generation.
Generation of Polarization Independent Ring-Airy Beam Based on Metasurface

Zhenhua Li,Sen Wang,Xing Li,Lei Xu,Wenhui Dong,Hanping Liu,Huilan Liu,Kang Xu

DOI: https://doi.org/10.3390/photonics11090858

IF: 2.536

2024-09-13

Photonics

Abstract:In this paper, we generated polarization-independent ring-Airy beams by designing metasurfaces that can realize modulations of both phase and amplitude. In numerical simulation, such metasurfaces are designed by placing subwavelength rectangular slits in Au film uniformly. Two orthogonal types of slits, with orientation angles of 45 and −45 degrees, are used to obtain the binary phase profile in the light transmitted from the metasurface under illumination with either right circular polarization (RCP) or left circular polarization (LCP). This satisfies the phase required for Airy beam generation. Meanwhile, the difference between the phase profile under RCP illumination and that under LCP illumination is right 2π, which can be regarded as the same. This makes the metasurface available to generate Airy beams regardless of incident polarization. We also analyzed the auto-focusing, self-healing, and frequency-response properties of the generated Airy beams with different parameters. This work opens up more opportunities for applications of Airy beams.

optics
A Ku-Band Reconfigurable Metasurface for Broadband Far-Field Beam Control

Xiaoyu Pang,Wanting Tong,Yifang Song,Shenghui Zhao,Junming Zhao,Ke Chen

DOI: https://doi.org/10.1109/CSRSWTC60855.2023.10427014

2023-01-01

Abstract:Reconfigurable metasurface has been developed as an efficient way for tailoring electromagnetic waves dynamically, which exhibits great potential in real-word applications. Here, we proposed a reconfigurable metasurface with high polarization conversion efficiency and broadband non-dispersive 1-bit phase modulation ranging from 11 GHz to 19.5 GHz. A crossed structure with four PIN diodes is selected to construct the tunable electromagnetic responses. As “0” and “1” meta-atoms are encoded in periodic spatial patterns, the metasurface can manipulate twin beams dynamically in the far-field region. The proposed metasurface may have potential uses in wireless communication and radar systems.
Dynamically Generating Diverse Multi‐Beams with On‐Demand Polarizations through Space‐Time Coding Metasurface (Advanced Optical Materials 6/2024)

Qi Hu,Weixu Yang,Jiahao Wang,Xiangcheng Lu,Junming Zhao,Tian Jiang,Ke Chen,Yijun Feng

DOI: https://doi.org/10.1002/adom.202470016

IF: 9

2024-03-01

Advanced Optical Materials

Abstract:Space‐Time‐Varying Programmable Metasurface A phase manipulation method by magnitude modulation is proposed by Ke Chen, Yijun Feng, and co‐workers (see article number 2300093), based on Euler's formula for metasurface design. The proposed concept and method may provide a new platform for advanced electromagnetic wave regulation, yielding various unique electromagnetic wave applications such as non‐angular‐momentum Hall effect, magnitude‐controlled phased‐array, interdigital topological structure, and magnitude‐controlled holography.

materials science, multidisciplinary,optics

Broadband generation of a multi-polarization multi-beam using a receiving-transmitting metasurface

Switchable Phase and Polarization Singular Beams Generation Using Dielectric Metasurfaces

Generation of Polarization Rotation Function Bessel Beams Based on All-Dielectric Metasurfaces

Polarization-Insensitive Metasurface with High-Gain Large-Angle Beam Deflection

A Broadband Dual-Polarized Reflective Metasurface for THz OAM Communication

Generation of scalar and vector beams with longitudinally varying polarization based on all-silicon metasurfaces

Generation of Multi-beam Bessel Beams Using a wideband Metasurface based on Spin-decoupled Principle

Broadband Reflection-Type Metasurface for OAM Antenna Design

A Reflective Metasurface for OAM and Polarization Multiplexing Communication in the W-band

Microwave Band Polarization-Decoupled Multi-Structured Waves Generation Metasurface

Generation of Terahertz Beam with Longitudinally Varied Polarization State Via Coherent Superposition Based on Metasurface

Broadband Wireless Communication with Space-Time-varying Polarization-Converting Metasurface

Independent and Free Control of Multiple Beams Enabled by Wideband Spin‐Decoupled Metasurface

Dual-mode vortex beam transmission metasurface antenna based on linear-to-circular polarization converter

Broadband generation of perfect Poincaré beams via dielectric spin-multiplexed metasurface

Generation of broadband terahertz focused vector beam using multifunctional metasurface

Dual-polarization reconfigurable metasurface for broadband vortex beam generation

A Broadband Double-Lined Metasurface for Simultaneous Generation of Inverse Functions

Generation of Polarization Independent Ring-Airy Beam Based on Metasurface

A Ku-Band Reconfigurable Metasurface for Broadband Far-Field Beam Control

Dynamically Generating Diverse Multi‐Beams with On‐Demand Polarizations through Space‐Time Coding Metasurface (Advanced Optical Materials 6/2024)