Abstract:A novel polarizer based on the dissolution-dynamic nuclear polarization (DNP) method has been designed, built and tested. The polarizer differs from those previously described by being designed with sterile use intent and being compatible with clinical use. The main features are: (1) an integral, disposable fluid path containing all pharmaceuticals constituting a sterile barrier, (2) a closed-cycle cryogenic system designed to eliminate consumption of liquid cryogens and (3) multi-sample polarization to increase throughput. The fluid path consists of a vial with the agent to be polarized, a pair of concentric inlet and outlet tubes connected to a syringe with dissolution medium and a receiver, respectively. The fluid path can operate at up to 400 K and 2.0 MPa and generates volumes as high as 100 mL. An inline filter removes the amount of electron paramagnetic agent in the final product by more than 100-fold in the case of [1-(13)C]pyruvate. The system uses a sorption pump in conjunction with a conventional cryocooler. The system operates through cycles of pumping to low temperature and regeneration of the sorption pump. The magnet accommodates four samples at the same time. A temperature of less than 1 K was achieved for 68 h (no sample heat loads) with a liquid helium volume of 2.4 L. The regeneration of the liquid helium could be achieved in less than 10 h, and the transition to cold (< 1.2 K) was achieved in less than 90 min. A solid state polarization of 36 ± 4% for [1-(13)C]pyruvic acid was obtained with only 10 mW of microwave power. The loading of a sample adds less than 50 J of heat to the helium bath by introducing the sample over 15 min. The heat load imposed on the helium bath during dissolution was less than 70 J. The measured liquid state polarization was 18 ± 2%.

Scalable dissolution-dynamic nuclear polarization with rapid transfer of a polarized solid

Multi-sample/multi-nucleus parallel polarization and monitoring enabled by a fluid path technology compatible cryogenic probe for dissolution dynamic nuclear polarization

Hybrid Polarizing Solids with Extended Pore Diameters for Dissolution Dynamic Nuclear Polarization

Full optimization of dynamic nuclear polarization on a 1 Tesla benchtop polarizer with hyperpolarizing solids

Dissolution Dynamic Nuclear Polarization-Enhanced Zero- to Ultralow-Field Nuclear Magnetic Resonance

Dynamic nuclear polarization polarizer for sterile use intent

Cryogen-Free dissolution Dynamic Nuclear Polarization polarizer operating at 3.35 T, 6.70 T and 10.1 T

Polarization Amplification in Dynamic Nuclear Polarization Magic-Angle Spinning Solid-State Nuclear Magnetic Resonance by Solubilizing Traditional Ionic Salts

Dynamic Nuclear Polarization with Conductive Polymers

A New Apparatus for the Manipulation of Polar KRb Molecules

Hyperpolarization of Long-Lived States of Protons in Aliphatic Chains by Bullet Dynamic Nuclear Polarization, Revealed on the Fly by Spin-Lock-Induced Crossing

Sustainable and cost-effective MAS DNP-NMR at 30 K with cryogenic sample exchange

Possible Applications of Dissolution Dynamic Nuclear Polarization in Conjunction with Zero- to Ultralow-Field Nuclear Magnetic Resonance

Real-time polarimetry of hyperpolarized $^{13}$C nuclear spins using an atomic magnetometer

Robust techniques for polarization and detection of nuclear spin ensembles

Boosting 1H and 13C NMR signals by orders of magnitude on a bench

Relaxation enhancement by microwave irradiation may limit dynamic nuclear polarization

Boosting 1 H and 13 C NMR signals by orders of magnitude on a bench

A Universal Method to Generate Hyperpolarisation in Beams and Samples