Abstract:The main goal of this paper is the modeling, numerical simulation, and experimental validation of the anisotropic ductile damage effects on initially anisotropic plastic flow with mixed (isotropic and kinematic) nonlinear hardening under large plastic strains for metal forming processes simulation. A symmetric second-rank damage tensor together with a symmetrized fourth-rank damage-effect tensor is used to describe the anisotropic ductile damage evolution and its effect on the large plastic flow with hardening. Following the concept of effective state variables in the framework of the total energy equivalence assumption, the “Murakami” fourth-rank damage-effect tensor is chosen to describe the anisotropic damage effect on the elastic-plastic behavior including the mixed hardening. The “Lemaitre” ductile anisotropic damage evolution relationships, where the principal directions of the damage rate tensor are governed by those of the plastic strain rate tensor, are used. As difference with the works cited above, the nonlinear mixed isotropic and kinematic hardening is taken into account considering the full and strong damage effects through the effective state variables deduced from the total energy equivalence assumption initially proposed by Saanouni et al. The non-associative plasticity theory is considered, and the “ Hill 1948 ” quadratic (equivalent) stress norm is used to describe the large plastic anisotropic flow accounting for mixed isotropic and kinematic hardening with anisotropic damage effects. The formulation is performed assuming finite plastic strains and small elastic strains through the so-called rotated frame formulation. The obtained model was implemented into ABAQUS/Explicit® FE software thanks to the user’s developed subroutine VUMAT. The numerical aspects related to the time discretization of the fully coupled anisotropic constitutive equations are carefully described. Finally and for the validation purpose, the model is identified using an appropriate experimental data base concerning the grade 316L stainless steel to simulate numerically some metal forming processes.

Effect of damage evolution on the auxetic behavior of 2D and 3D re-entrant type geometries

Progressive failure analysis of 2D woven composites at the meso-micro scale

Applicability Evaluation of Damage Evolution Models in Simulating Repeated Low-Velocity Impact Behavior of Composite Laminates

Theory of Visco-elasto-plastic Damage Mechanics

An approach to model mechanical damage in particulate composites with viscoelastic matrix

A finite-strain model for incomplete damage in elastoplastic materials

Multi-stress damage and healing mechanics in quasi-brittle materials: Theoretical overview

The Relationship Between Damage Variables and Their Evolution Laws and Microstructural and Physical Properties

Comparison of two progressive damage models for predicting low-velocity impact behavior of woven composites

A Unified Invariant Description of Micromechanically-Based Effective Elastic Properties for Two-Dimensional Damaged Solids

A gradient enhanced constitutive framework for the investigation of ductile damage localization within semicrystalline polymers

An anisotropic, brittle damage model for finite strains with a generic damage tensor regularization

A hyperelastic-damage model based on the strain invariants

An Enhanced Progressive Damage Model for Laminated Fiber-Reinforced Composites Using the 3D Hashin Failure Criterion: A Multi-Level Analysis and Validation

A novel phase‐field approach to brittle damage mechanics of gradient metamaterials combining action formalism and history variable

An adaptive variational Quasicontinuum methodology for lattice networks with localized damage

Exploiting nonlinearities through geometric engineering to enhance the auxetic behaviour in re-entrant honeycomb metamaterials

Anisotropic ductile damage fully coupled with anisotropic plastic flow: Modeling, experimental validation, and application to metal forming simulation

Application of a large deformation nonlinear-viscoelastic viscoplastic viscodamage constitutive model to polymers and their composites

On the experimental determination and prediction of damage evolution in composites via cyclic testing

A combined viscoelasticity-viscoplasticity-anisotropic damage model with evolving internal state variables applied to fiber reinforced polymer composites