Abstract:Long-term efficient separation of highly emulsified oily wastewater is challenging. Reported herein is the preparation of a reinforced superhydrophilic, underwater superoleophobic membrane with demulsification properties using active iron nanoparticles in situ generated on a polydopamine (PDA)/polyethylenimine (PEI)-modified polyvinylidene fluoride (PVDF) membrane surface. A stable zwitterionic structure is fabricated on the membrane surface and provides it with an excellent capability of binding a hydration layer, leading to enhanced superhydrophilic/underwater superoleophobic properties. The interaction between the membrane surface and water is quantified using the relaxation time of water. After iron nanoparticles in situ anchoring, the superhydrophilic, underwater superoleophobic PDA/PEI modified PVDF membrane shows more stable flux behaviors, higher oil separation efficiency, demulsification, and excellent antioil-fouling properties for various anionic, nonionic, and cationic surfactant-stabilized oil-in-water emulsions in a crossflow filtration system. The reinforced hydration layer and the amphoteric charged demusification properties of the membrane play important roles in enhancing the membrane separation performance. The reinforced membrane also exhibits excellent cleaning and reusability performance in long-term operations. The outstanding separation performance, as well as the simple and cost-effective fabrication process of the membrane with various favorable properties, highlight its promise in practical emulsified oily water applications.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c13508?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c13508</a>.Schematic diagrams of membrane surface, water conductivity of membrane, mean pore diameters histogram, flux recovery ratios, schematic illustration of different emulsifiers stabilized oil-containing emulsions, permeance, and oil removal efficiency, elemental weight percentages of the membranes, and changes in TOC of various oil emulsions (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c13508/suppl_file/am0c13508_si_001.pdf">PDF</a>)Movie S1, SH-P-M fixed in a membrane tank (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c13508/suppl_file/am0c13508_si_002.mp4">MP4</a>)Movie S2, Fe<sup>2+</sup>@Fe-SH-P-M fixed in a membrane tank (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c13508/suppl_file/am0c13508_si_003.mp4">MP4</a>)Movie S3, feed solutions of the filtrates (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c13508/suppl_file/am0c13508_si_004.mp4">MP4</a>)Movie S4, feed solutions of the filtrates (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c13508/suppl_file/am0c13508_si_005.mp4">MP4</a>)This article has not yet been cited by other publications.

Efficient and sustainable separation of oil from oily wastes using acid-base switchable ionic liquid system

ater superoleophobic hybrid membranes for e ff ective oil – water separation from oil-contaminated water †

Extraction of Low-Concentration Bio-Based Diols and Dicarboxylic Acids Using Ionic Liquid-Based Aqueous Two-Phase Systems: Experimental and Theoretical Studies

A solid waste with special surface wettability under‐liquid used for surfactant‐stabilized emulsion separation

Wettability Switchable Membranes for Separating Both Oil-in-water and Water-in-oil Emulsions

Macroporous Monoliths with Ph-Induced Switchable Wettability for Recyclable Oil Separation and Recovery.

Reversible Superwettability Switching of a Conductive Polymer Membrane for Oil-Water Separation and Self-Cleaning

Highly stable superamphiphobic material with ethanol-triggered switchable wettability for high-efficiency on-demand oil–water separation

pH-responsive smart superwetting Fe foam for efficient in situ on-demand oil/water separation

A Versatile and Efficient Approach to Separate Both Surfactant-Stabilized Water-In-Oil and Oil-In-Water Emulsions

Performance and Mechanism Study on Surfactant-Stabilized Oil Microdroplets Extraction from Oily Wastewater

Electro-responsive Carbon Membranes with Reversible Superhydrophobicity/superhydrophilicity Switch for Efficient Oil/water Separation

Demulsification and Oil Recovery from Oil-in-water Cutting Fluid Wastewater Using Electrochemical Micromembrane Technology

Switchable superlyophobic CoAl-layered double hydroxide (LDH)-based mesh membranes for separation of various oil/water systems and removal of soluble organic pollutants

Advanced Switchable Molecules and Materials for Oil Recovery and Oily Waste Cleanup

Simple Amphoteric Charge Strategy to Reinforce Superhydrophilic Polyvinylidene Fluoride Membrane for Highly Efficient Separation of Various Surfactant-Stabilized Oil-in-Water Emulsions

A multifunctional coating with switchable wettability for efficient oil-water and emulsions separation

Dual-channel Separation System Based on Platanus Fruit-Like Ni@Ni(OH) Hierarchical Architecture for Fast, Efficient and Continuous Light/heavy Oil–water Separation

A superwettable functionalized-fabric with pH-sensitivity for controlled oil/water, organic solvents separation, and selective oil collection from water-rich system

Intelligent Composite Foam with Reversible Tunable Superwettability for Efficient and Sustainable Oil/water Separation and High-Concentration Organic Wastewater Purification

Efficient Separating Dipropyl Ether/isopropanol/water Azeotrope by Extractive Distillation with Mixed Entrainer Based on Ionic Liquid