Abstract:BackgroundThe impact of power and signal cable harnesses on the dynamic behavior of lightweight space structures has come into the spotlight in the recent past. The previous analytical modelling efforts in this area have primarily focused on either periodically wrapped beam structures or plate structures of parallel cable wrapping patterns. ObjectiveThe presented paper aims at experimental validation for an analytical model developed by the authors for cable harnessed plate structures with periodic patterns such as zigzag and diagonal. The work includes an extensive analysis of the vibration behavior of cable-harnessed plates in comparison to their host plates with no cables attached.MethodsAn energy equivalence homogenization technique is developed to model the vibrations behavior of the cable harnessed plates of periodic patterns. Experimental modal analysis is performed on cable-harnessed plates using impact hammer excitation and laser doppler vibrometry. The natural frequencies, mode shapes, and frequency response functions are obtained for comparisons with the model predictions.ResultsThe impacts of the harnessing cables on plate dynamics are modeled and compared to the experimental frequency response functions for periodically wrapped cabled plates in four different test structures. The impact of the cable wrapping directions along the length and width on the modes that experience the largest stiffening effects are clearly discussed and validated with the test results for the two major wrapping patterns, diagonal and zigzag. It is shown that for a given number of fundamental elements and cable wrapping rows along the length, the parallel pattern experiences the largest stiffening along the length followed by the diagonal and zigzag patterns respectively. Also, the twist mode was stiffened the most for the zigzag pattern and the least in the parallel cabled plate. Finally, the wrapping angle for which the torsional frequency is maximum for each of the diagonal and zigzag patterns is found to be the same. A computational study is also performed to further analyze the system dynamics by varying the host plate dimensions.ConclusionsThe model and test results are shown to be in very good agreement. The analytical model is found to well predict the cables' mass and stiffening effects for all the wrapping patterns studied in this research.

Taut cables with hanging masses: A metamaterial-like dynamic behavior

Natural Vibration Analysis of Bird-Nest-pattern Cable Domes

Transient Responses Of Coaxial Cables In An Electrically Large Cabin With Slots And Windowns Illuminated By An Electromagnetic Pulse

Aeolian Vibration Dynamic Analysis of Large-Span, Relaxed Antenna Cable Net Based on Finite Particle Method

Dynamic Response of the Cable to Moving Mass

Continuum Modeling and Vibration Analysis of Cable-Harnessed Plate Structures of Periodic Patterns

Vibrations Analysis of Cable-Harnessed Plates: Continuum Modeling and Experimental Validation

Self-excited Oscillation Analysis of a Taut Cable under Wind Loading

Estimation of Main Cable Tension Force of Suspension Bridges Based on Ambient Vibration Frequency Measurements

Variational study of a Maxwell–Rayleigh-type finite length model for the preliminary design of a tensegrity chain with a tunable band gap

Rest length controlled tunable band structure in periodic tensegrity metastructure – a numerical study using a novel consistent stiffness and mass formulation

Bandgap structure of tensegrity mass–spring chains equipped with internal resonators

A metamaterial having a frequency dependent elasticity tensor and a zero effective mass density

Global Bifurcations And Chaotic Dynamics In Suspended Cables

Vibration response of cables in cable-stayed spatial structures under axial excitation

Identification of cable tension through physical models and non-contact measurements

Dynamic Analysis and Experimental Validation of Periodically Wrapped Cable-Harnessed Plate Structures

Effects of Concentrated Mass on the In-Plane Dynamic Behaviors of Two-Cable Networks with a Cross-Tie

Internal resonance and energy transfer of a cable-stayed beam with a tuned mass damper

Nonlinear vibrations of suspended cables—Part II: Deterministic phenomena

Analysis of longitudinal oscillations in a vertically moving cable subject to nonclassical boundary conditions