Abstract:The controllable synthesis of Fe3O4/PANI (polyaniline) based on natural three-dimensional (3D) porous DE (diatomite) is clarified. The successful transition from DE/FeOOH to DE/Fe3O4 was realized by hydrothermal method and subsequent carbon reduction reaction. The fabricated PANI coating on DE/Fe3O4 was performed by a common chemical oxidation method. The successful synthesis of DE/Fe3O4/PANI is proved by XRD, XPS, FTIR and Raman test. DE/Fe3O4/PANI (denoted as DFP-50) hybrid composite exhibits a higher specific capacitance due to the good synergistic effects between DE/Fe3O4 and PANI. Moreover, to further explore the influences of PANI on electrochemical properties, DFP-25 and DFP-100 have been synthesized by adjusting the experimental parameter of PANI. Electrochemical tests of DFP-25 display that DFP-25 composite shows the best comprehensive electrochemical performance that can achieve a balance between increasing specific capacitance and maintaining cycle stability. The results shows DE/Fe3O4/PANI hybrid composite holds great potential for economical supercapacitor.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to improve the electrochemical performance of ferrite (Fe₃O₄) as an electrode material for supercapacitors. Specifically, the researchers overcame the inherent low conductivity of Fe₃O₄ and the problem of nanoparticle aggregation by combining with the conductive polymer polyaniline (PANI). In addition, in order to make full use of the characteristics of Fe₃O₄ and prevent its structure from collapsing in the composite system, natural diatomaceous earth (DE) with a three - dimensional porous structure was selected as a template. The DE/Fe₃O₄/PANI composite synthesized by this method aims to achieve a higher specific capacitance while maintaining good cycle stability, thus showing great potential as an economical supercapacitor material. The key points in the paper include: - **Material design**: Utilize the porous structure of diatomaceous earth as a support to prevent the aggregation of Fe₃O₄ nanoparticles, and coat polyaniline on its surface by chemical oxidation method to form a composite material with a synergistic effect. - **Synthesis method**: The transformation from DE/FeOOH to DE/Fe₃O₄ was achieved by the hydrothermal method and the subsequent carbon reduction reaction, and then PANI was coated on DE/Fe₃O₄ by the chemical oxidation method. - **Performance evaluation**: The chemical composition and crystal structure of the material were characterized by means such as X - ray diffraction (XRD), X - ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR) and Raman spectroscopy. Electrochemical tests showed that the optimized composite DFP - 25 had a specific capacitance of 242.9 F g⁻¹ at a current density of 1 A g⁻¹, and could still maintain a capacitance retention rate of 73% after 1000 cycles at a current density of 3 A g⁻¹, showing the best comprehensive electrochemical performance. In conclusion, this research aims to solve the conductivity and cycle stability problems of Fe₃O₄ as an electrode material for supercapacitors by designing and preparing a new type of DE/Fe₃O₄/PANI composite, thereby developing a supercapacitor material with better performance.

Biotemplate Synthesis of Fe3O4/Polyaniline for Supercapacitor

Template-free Electrochemical Nanofabrication of Polyaniline Nanobrush and Hybrid Polyaniline with Carbon Nanohorns for Supercapacitors

Construction of tunable ZnCoO x /C-PANI electrode materials for high-performance supercapacitors

Development of PANI/FeS2/MnO2 Composite Electrode Materials for High‐Performance Supercapacitors

Three-dimensional Carbon Nanotube/ethylvinylacetate/polyaniline As a High Performance Electrode for Supercapacitors

Facile Synthesis of a Ni-based NiCo2O4-PANI Composite for Ultrahigh Specific Capacitance

Boosting the Utilization and Electrochemical Performances of Polyaniline by Forming a Binder-Free Nanoscale Coaxially Coated Polyaniline/Carbon Nanotube/Carbon Fiber Paper Hierarchical 3D Microstructure Composite as a Supercapacitor Electrode

Synthesis of Polyaniline Nanoparticles Deposited on Two-Dimensional Titanium Carbide for High-Performance Supercapacitors

Electrochemical Deposition of PANI/PEDOT:PSS Composite Polymer for Supercapacitors Application

Synthesis and Electrochemical Measurement of Three Dimensional Carbon Nanofibers/Co3O4-Polyaniline Composites as Supercapacitor electrode materials in Neutral Electrolyte

Preparation of ternary composite CF@γ-MnO2/PANI material in electrochemical supercapacitors

Controllable one step electrochemical synthesis of PANI encapsulating 3d-4f bimetal MOFs heterostructures as electrode materials for high-performance supercapacitors

Organ-like Ti3C2 Mxenes/polyaniline composites by chemical grafting as high-performance supercapacitors

Electrochemical investigation of Fe3O4/TNT/PANI composites for enhanced supercapacitor applications

Synthesis of biochemically reduced graphene-oxide/Fe0 containing polyaniline ternary hybrid composite through interfacial polymerization for supercapacitors

MnO2/polyaniline hybrid nanostructures on carbon cloth for supercapacitor electrodes

Fabrication of PANI@Ti<sub>3</sub>C<sub>2</sub>T<sub>x</sub>/PVA hydrogel composite as flexible supercapacitor electrode with good electrochemical performance

Electrochemical Synthesis of Functionalized Graphene/Polyaniline Composite Using Two Electrode Configuration for Supercapacitors

Facile Synthesis and Electrochemical Characterization of Polyaniline@TiO2-CuO Ternary Composite as Electrodes for Supercapacitor Applications

Fabrication of PANI@Ti3C2Tx/PVA hydrogel composite as flexible supercapacitor electrode with good electrochemical performance

TiO2-C Nanowire Arrays@polyaniline Core-Shell Nanostructures on Carbon Cloth for High Performance Supercapacitors