Abstract:a variety of composite steel-concrete column segments using shear connectors of different shapes and sizes to provide resistance to slip at steel – concrete interfaces . Hence , it represents a qualitative transition in the experimental and analytical investigations on shear connectors effectivity at steel – concrete interfaces , as most studies in the field of shear connectors were devoted to composite beam and slab – systems .Three types of shear connectors – with four concrete grades for each type – were used in fabricating composite specimens . The twelve composite prototypes were subjected to push – out test individually to examine their behavior by measuring the slip values for each load incremental till failure , thus determining the resistance extent of each connectors type and specifying the failure mode at interface .A nonlinear three – dimensional finite element analysis have been carried out on twelve composite column segments using ANSYS computer program (5 th version , 2882) to investigate their behavior and predict their load – slip relationships , equivalent stress distributions and concrete cracking patterns . The defined numerical modeling included using the eight node isoparametric brick element with smeared reinforcement (SOLID 55 ) and the eight node isoparametric steel brick element ( SOLID75) , to model the reinforced concrete medium and the steel section and shear connectors , respectively , considering perfect bond between concrete and steel reinforcing bars . Nonlinear properties including cracking and crushing of concrete , yielding of steel section and reinforcement , and nonlinear bond – slip at interface were also considered .Comparison of the experimental and theoretical results has shown good agreement that verifies the accuracy of the finite element model based on the smeared crack model of concreteResults have detected the development of the relative movement (slip) be at all ranges of the load-slip relationship at interface even with using effective shear connection and /or high quality concrete.The headed studs have revealed the highest slip resistance and ultimate load over the channel and the L-shaped studs . The high strength concrete has also revealed the same superiority over the other three tested types of concrete .

Experimental study on full scale steel-concrete composite beams using truss-type shear connectors

Experimental Studies on Shear Strength of Steel–Concrete Composite Beams

Experimental Research on Novel RPC-steel Composite Connections for Prefabricated Glubam-Concrete Composite Beams

Feasibility and Performance of Novel Tapered Iron Bolt Shear Connectors in Demountable Composite Beams

The Use of Shear Connectors for Enhancing the Performance of Steel–Concrete Composite Beams: Experimental and Numerical Assessment

Experimental research and numerical analysis of shearing resistance in steel-concrete composite beam connectors

Experimental and Theoretical Study on a New Type of Non-Embedded T-bolt Shear Connector in Composite Beams

Shear connector systems for composite beam with cold-formed steel of lipped C-channel section

Experimental Investigation on Shear Performance of Transverse Angle Shear Connectors

EXPERIMENTAL INVESTIGATION ON THE SHEAR RESISTANCE OF I-SHAPED PERFORATED CONNECTORS IN COMPOSITE BEAMS

Experimental Study on Flexural Behavior of Assembled U-shaped Steel–Concrete Composite Beams

Experimental Study on Shaped Steel Shear Connectors Used in Large-Scale Composite Structures

Mechanical Behavior of Stud Shear Connectors Embedded in Hfrc

Performance of Shear Connector in Composite Slab and Steel Beam with Reentrant and Open Trough Profiled Steel Sheeting

Experimental Study on Steel-Concrete Composite Beams with Uplift-restricted and Slip-Permitted Screw-Type (URSP-S) Connectors

Experimental Study on Shear Connectors in Steel-concrete Composite Structures Based on Measured Data

Flexural Behaviour of a Cold-Formed Steel-Concrete Composite Beam with Channel Type Shear Connector – An Experimental and Analytical Study

Experimental and Analytical Study on Steel-Concrete-ecc Composite Frames with URSP-S Connectors

Behavior of an Advanced Bolted Shear Connector in Prefabricated Steel-Concrete Composite Beams

EXPERIMENTAL AND FINITE ELEMENT INVESTIGATION ON THE LOAD – SLIP BEHAVIOR OF COMPOSITE PUSH OUT SEGMENTS USING VARIOUS SHEAR CONNECTORS

Assessment of Shear Connection through Composite Beam Modeling