Abstract:A new disturbance observer based control scheme is developed for a quadrotor under the concurrent disturbances from a lightweight elastic tether cable and a lumped vertical disturbance. This elastic tether is unusual as it creates a disturbance proportional to the multicopter's translational movement. This paper takes an observer-based approach to estimate the stiffness coefficient of the cable and uses the system model to update the estimates of the external forces, which are then compensated in the control action. Given that the tethered cable force affects both horizontal channels of the quadrotor and is also coupled with the vertical channel, the proposed disturbance observer is constructed to exploit the redundant measurements across all three channels to jointly estimate the cable stiffness and the vertical disturbance. A pseudo-inverse method is used to determine the observer gain functions, such that the estimation of the two quantities is decoupled and stable. Compared to standard disturbance observers which assume nearly constant disturbances, the proposed approach can quickly adjust its total force estimate as the tethered quadrotor changes its position or tautness of the tether. This is applied to two experiments - a tracking performance test where the multicopter moves under a constant tether strain, and an object extraction test. In the second test, the multicopter manipulates a nonlinear mechanism mimicking the extraction of a wedged object. In both cases, the proposed approach shows significant improvement over standard Disturbance Observer and Extended State Observer approaches. A video summary of the experiments can be found at <a class="link-external link-https" href="https://youtu.be/9gKr13WTj-k" rel="external noopener nofollow">this https URL</a>.

Confidence-Aware Object Capture for a Manipulator Subject to Floating-Base Disturbances

A Confidence-based Allocation Approach for USV Trajectory Tracking Via Human-Robot Co-Driving

Neural Motion Prediction for In-flight Uneven Object Catching

USV-Tracker: A Novel USV Tracking System for Surface Investigation with Limited Resources

Energy-based trajectory tracking control of under-actuated unmanned surface vessels

A Model Predictive Control Approach for USV Autonomous Cruising Via Disturbance Learning

Robust Trajectory Tracking Control of Underactuated Unmanned Surface Vehicles with Exponential Stability: Theory and Experimental Validation.

Model Predictive Control Based on State Space and Risk Augmentation for Unmanned Surface Vessel Trajectory Tracking

Predictive motion control for autonomous capture of a tumbling target with a space manipulator

A Vision-based UAV Tracker Aiming at Aerial Targets

Autonomous Capturing of Moving Target with Optimal Rendezvous Attitude and Manipulator Configuration.

Collision Avoidance and Path Point Tracking Control for Underactuated Unmanned Surface Vehicles with Unknown Model Nonlinearity

Active Vision-Based Finite-Time Trajectory-Tracking Control of an Unmanned Surface Vehicle Without Direct Position Measurements

Attitude constraint-based recovery for under-actuated AUVs under vertical plane control during the capture stage

Robust finite-time sliding mode control of unmanned surface vehicle with active compensation of pose estimation uncertainty

Online Predictive Visual Servo Control for Constrained Target Tracking of Fixed-Wing Unmanned Aerial Vehicles

Trajectory Optimization and Tracking Control of Free-flying Space Robots for Capturing Non-cooperative Tumbling Objects

Two-phase visual servoing for capturing tumbling non-cooperative satellites with a space manipulator

Redundant Observer-Based Tracking Control for Object Extraction Using a Cable Connected UAV

A Lightweight Man-Overboard Detection and Tracking Model Using Aerial Images for Maritime Search and Rescue