Abstract:The wine industry is a sector of great importance in the Spanish economy, contributing substantial annual revenues. However, one challenge facing the industry is the amount of waste generated, reaching millions of tons annually. These residues consist of organic matter of industrial interest, such as polyphenols. These substances are characterised by their excellent antioxidant properties, making them ideal for use in the food, cosmetic, and pharmaceutical industries. Modern techniques, such as membrane technology, are explored for their extraction based on separating compounds according to size. This work studies a sequential filtration process using ultrafiltration (UF) and nanofiltration (NF) membranes at different operating conditions (2 bar and 9.5 bar for UF and NF, respectively, at 20 °C) to extract polyphenols from wine lees. The results show a total polyphenols rejection rate for each process of 54% for UF and 90% for NF. Pore blocking models have been studied for the UF process and an intermediate pore blocking of the membrane upon wine lees filtration has been identified. A mathematical model that justifies the behavior of a polymeric NF membrane with the filtration of pre-treated vinasse residues has been validated. This study shows a viable process for extracting polyphenols from wine lees with sequential membrane technology.

What problem does this paper attempt to address?

The main problem that this paper attempts to solve is the effective utilization of a large amount of waste (such as lees) generated in the wine industry. Specifically, the researchers explored a sequential filtration process using ultrafiltration (UF) and nanofiltration (NF) membrane technologies to efficiently extract polyphenolic compounds from lees. Polyphenols have excellent antioxidant properties and are therefore highly valuable in industries such as food, cosmetics, and pharmaceuticals. Through this research, the authors hope to provide a sustainable and cost - effective method for polyphenol extraction, thereby reducing waste in wine production and improving resource utilization. ### Research Background 1. **Importance of Polyphenols**: - Polyphenols are a class of chemicals naturally present in plants and vegetables and are known for their excellent antioxidant properties. - These compounds also have many beneficial properties such as anti - inflammatory, heart - protective, anti - cancer, anti - aging, and antibacterial. - More than 10,000 polyphenols have been discovered so far, among which flavonoids are the most widely studied class. 2. **Waste Problem in the Wine Industry**: - Spain is the third - largest wine - producing country in the world and generates a large amount of waste every year, especially lees. - Lees are mainly composed of organic matter and contain rich polyphenolic compounds, which have high added value. 3. **Application of Membrane Technology**: - Membrane separation technology is a sustainable method for polyphenol extraction because it does not require solvents, has low energy consumption, and is easy to be modularly assembled. - In this study, two membrane technologies, ultrafiltration and nanofiltration, were used, and the experiments were carried out at pressures of 2 bar and 9.5 bar respectively, with a temperature of 20 °C. ### Research Methods 1. **Materials and Methods**: - INSIDE CéRAM™ ceramic ultrafiltration membranes and FilmTech™ NF270 - 2540 polymer nanofiltration membranes were used. - The experimental setup included a constant - temperature system, a flow meter, and a data acquisition system. - Lees samples were pretreated to remove larger particles to reduce membrane fouling. 2. **Experimental Steps**: - The ultrafiltration experiment was carried out at a pressure of 2 bar, and the nanofiltration experiment was carried out at a pressure of 9.5 bar. - The polyphenol concentration was determined by the Folin - Ciocalteu method. - The permeate fluxes under different conditions were recorded, and the membrane fouling model was analyzed. ### Main Results 1. **Polyphenol Extraction Efficiency**: - The total polyphenol rejection rate in the ultrafiltration process was 54%, and the total polyphenol rejection rate in the nanofiltration process was 90%. - The behavior of the polyamide nanofiltration membrane in the filtration of pretreated lees was verified by a mathematical model. 2. **Membrane Fouling Model**: - The pore - blocking model of the ultrafiltration process was studied, and the intermediate pore - blocking phenomenon was determined. - The water permeability of the ultrafiltration and nanofiltration membranes was analyzed by linear regression, and good fitting results were obtained. ### Conclusion This study demonstrates the feasibility of efficiently extracting polyphenols from lees using sequential membrane technologies. By optimizing the operating conditions and cleaning procedures, the polyphenol extraction efficiency can be significantly improved while prolonging the service life of the membranes. This method not only helps to reduce waste in the wine industry but also can provide high - value - added polyphenol raw materials for industries such as food, cosmetics, and pharmaceuticals.

Experimental Study of a Sequential Membrane Process of Ultrafiltration and Nanofiltration for Efficient Polyphenol Extraction from Wine Lees

Recovery of phenolic compounds from wine lees using green processing: Identifying target molecules and assessing membrane ultrafiltration performance

A membrane-assisted green strategy for purifying bioactive compounds from extracted white wine lees

Enhancing Anthocyanin Extraction from Wine Lees: A Comprehensive Ultrasound-Assisted Optimization Study

Nanofiltration and Tight Ultrafiltration Membranes for the Recovery of Polyphenols from Agro-Food By-Products

Polyphenol-Rich Extracts Obtained from Winemaking Waste Streams as Natural Ingredients with Cosmeceutical Potential

Compositional Consequences of Ultrafiltration Treatment of White and Red Wines

Enhanced Recovery of Natural Antioxidants from Grape Waste Using Natural Eutectic Solvents-Based Microwave-Assisted Extraction

Optimization of the green extraction process of antioxidants derived from grape pomace

Sustainable management of wine-derived leftovers: Enhanced extraction of antioxidants and production of levulinic acid by microwave-assisted processing

Extraction of Bioactive Compounds from Wine Lees: A Systematic and Bibliometric Review

Valorization of Wine Lees: Assessment of Antioxidant, Antimicrobial and Enzyme Inhibitory Activity of Wine Lees Extract and Incorporation in Chitosan Films

Effective treatment of olive mill effluents from two-phase and three-phase extraction processes by batch membranes in series operation upon threshold conditions

Combining Organic Solvent Ultrafiltration, Nanofiltration, and Reverse Osmosis to Purify and Concentrate the Phenolic Compounds from Wet Olive Pomace

Integrated Membrane Process for the Treatment and Reuse of Residual Table Olive Fermentation Brine and Anaerobically Digested Sludge Centrate

Extraction and purification of high added value compounds from by-products of the winemaking chain using alternative/nonconventional processes/technologies

Optimization of Protein Extraction of Oenological Interest from Grape Seed Meal Using Design of Experiments and Response Surface Methodology

Green Separation by Using Nanofiltration of Tristerix tetrandus Fruits and Identification of Its Bioactive Molecules through MS/MS Spectrometry

Nanofiltration-Assisted Concentration Processes of Phenolic Fractions and Carotenoids from Natural Food Matrices

Determination of Polyphenols and Vitamins in Wine-Making by-Products by Supercritical Fluid Extraction (SFE)

Membrane-based technologies for meeting the recovery of biologically active compounds from foods and their by-products