Abstract:This work focuses on developing corrosion control and protecting the environment by creating affordable, sustainable, environmentally friendly, and efficient corrosion resistance chemicals. That is, through synthesized three hydrazone Schiff bases E-2-(1-hydrazonoethyl)thiazole (HTZ), 2-((E)-(((Z)-1-(thiazol-2-yl)ethylidene)hydrazono)methyl)phenol (HTZS), and 2-((E)-(((Z)-1-(pyridin-2-yl)ethylidene)hydrazono)methyl)phenol (HPYS) and corrosion inhibitors for C-steel in 8 M H3PO4 solution that were studied. The chemicals were analyzed by using 1H NMR and 13C NMR spectroscopy to learn more about them. Predominantly, the hydrazone-based Schiff bases have been considered powerful inhibitors due to their ability to be adsorbed with very low concentrations through their reactive sites (N, O, and S). Maximum surface (θmax) coverage and inhibition efficiency of 83.33% were sufficiently found at 99.00 × 10-3 mol/L concentration of HTZS at 293 K. Galvanostatic experiments demonstrated that raising the concentration of hydrazones improved mass transfer resistance. To study microstructure, scanning, reflectance, and energy-dispersive X-rays were used. Roughness and qualitative adhesion of the adsorbed layer were estimated by an atomic force microscope. After adding 99.00 × 10-3 mol/L of HTZS, the degree of surface brightness and reflectance increases to 137.20, relative to the corroded electrolyte-free solution 27.70. The roughness (Ra) decreased from 0.468 to 0.088 μm by adding HTZS. A surface morphology study confirmed that adding hydrazones to the C-steel dissolution bath greatly improves the surface's look and texture quality. The atomic absorption spectroscopy technique was used to compare the concentration of the iron ions that remained in the solution after galvanostatic analysis in the absence and presence of the hydrazones under different conditions; it was found that the inhibited solution contained lower concentrations of iron ions as compared to the uninhibited solution. The DFT theoretical analysis verified the observation of hydrazone physical adsorption through bonding electrons that obey kinetic adsorption isotherms. It is based on examining the highest occupied molecular orbital-lowest occupied molecular orbital (HOMO-LUMO), the Fukui functions, and the Mulliken atomic charge. Overall, the results suggest that HTZS is a good corrosion inhibitor with a large surface area due to the presence of S, N, and O atoms, allowing for creating a larger surface due to the large molecular volume of atoms protecting against the corrosion process.

Effect of Adsorption and Interactions of New Triazole-Thione-Schiff Bases on the Corrosion Rate of Carbon Steel in 1 M HCl Solution: Theoretical and Experimental Evaluation

Adsorption Mechanism, Kinetics, Thermodynamics, and Anticorrosion Performance of a New Thiophene Derivative for C-Steel in a 1.0 M HCl: Experimental and Computational Approaches

Experimental and theoretical approach for a better understanding of the mechanisms of adsorption and inhibition of corrosion for carbon steel by thiazolidine derivatives in 1M HCl medium

1,2,4-triazole-5-thione derivative for inhibiting Carbon steel corrosion in 1M HCl: Synthesis, electrochemical, SEM/EDX, DFT, and MD investigations

Adsorption Mechanism of Eco-Friendly Corrosion Inhibitors for Exceptional Corrosion Protection of Carbon Steel: Electrochemical and First-Principles DFT Evaluations

An Exploratory Experimental Analysis Backed by Quantum Mechanical Modeling, Spectroscopic, and Surface Study for C-Steel Surface in the Presence of Hydrazone-Based Schiff Bases to Fix Corrosion Defects in Acidic Media

Tetrahydropyrimido-Triazepine derivatives as anti-corrosion additives for acid corrosion: Chemical, electrochemical, surface and theoretical studies

Corrosion inhibition performance of new Schiff base cyclohexanamine derivatives on C-steel in 1 M HCl solution: Electrochemical, chemical, surface and computational explorations

Experimental and Computational Anticorrosion Behaviors of Pyrazole s-Triazine/anilino-morpholino Derivatives for Steel in Acidic Solutions

Unraveling the corrosion inhibition mechanism of triazine derivatives for carbon steel: Experimental and theoretical insights into interfacial adsorption

Two novel Schiff bases derived from 3-amino-1,2,4-triazole as corrosion inhibitors for carbon steel pipelines during acidizing treatment of oil wells: Laboratory and theoretical studies

Comparative Investigation of Corrosion-Mitigating Behavior of Thiadiazole-Derived Bis-Schiff Bases for Mild Steel in Acid Medium: Experimental, Theoretical, and Surface Study

Corrosion inhibition properties of schiff base derivative against mild steel in HCl environment complemented with DFT investigations

The adsorption and inhibition efficiency of 2-amino-4-methoxy-6-methyl-1,3,5-triazine for corrosion of mild steel in hydrochloric acid solution

Synthesis and corrosion inhibition evaluation of a new schiff base hydrazone for mild steel corrosion in HCl medium: electrochemical, DFT, and molecular dynamics simulations studies

New epoxy resin as a corrosion inhibitor for the protection of carbon steel C38 in 1M HCl. experimental and theoretical studies (DFT, MC, and MD)

Anti-Corrosive Potentials of 1,2,4-Triazole-5-thiones For Mild Steel 1030 in Acidic Environment

A combination of experimental and theoretical methods in evaluating triazole derivatives' mild steel corrosion inhibition ability in an acidic solution

Adsorption and Inhibition Mechanisms of New Pyrazole Derivatives for Carbon Steel Corrosion in Hydrochloric Acid Solutions Based on Experimental, Computational, and Theoretical Calculations

Retardation of the C-Steel Destruction in Hydrochloric Acid Media Utilizing an Effective Schiff Base Inhibitor: Experimental and Theoretical Computations

Theoretical and electrochemical evaluation of tetra-cationic surfactant as corrosion inhibitor for carbon steel in 1 M HCl