Abstract:State-of-the-art capacity and stability of the silicon (Si) anode already meet the requirments of lithium ion batteries (LIBs). However, the high-cost techniques hinder its practical applications. Herein, we developed a facile strategy to greatly enhance the electrochemical performance of the recycled Si material worked with commercial carboxymethyl cellulose : styrene butadiene rubber and conductive material. In that, small amount of pyromellitic acid (PA) with multi-carboxylic groups as the additive played a key role by passivating the Si surface, forming 3-dimensional crosslink network structure and anchoring the electrode onto Cu current collector. Thus, the side-reactions between Si-electrolyte and volume expansion during charge-discharge process were effectively suppressed. Moreover, the addition of PA also increased the porosity of the electrode by altering the compositions distribution, and the introduction of Ni2+ as the complexant can further enhance these effects. As a matter of fact, the Si-anode exhibited outstanding electrochemical performance with an initial charge capacity of 2325.0 mAh g-1 and a charge capacity retention of 1268.8 mAh g-1 after 500 cycles at a current density of 1000 mA g-1, corresponding to an average decay rate of 0.091% per cycle. Additionally, a capacity of 1079.7 mAh g-1 can be still achieved at a high current density up to 10,000 mA g-1. The performance surpassed that reported in the literatures using similar Si-flakes and are comparable to that using nanoSi and complicated technique. Overall, our work enabled a simple and cost-effective way for the practical application of Si materials.

High value-added regeneration of anode materials from retired lithium-ion batteries: Structural design and synthesis process

Recycling of photovoltaic silicon waste for high-performance porous silicon/silver/carbon/graphite anode

In Situ Wrapping Si Nanoparticles with 2D Carbon Nanosheets As High-Areal-Capacity Anode for Lithium-Ion Batteries.

High stability of sub-micro-sized silicon/carbon composites using recycling Silicon waste for lithium-ion battery anode

Self-supporting Multi-Carbon Composites Assist Recycled-Silicon for High-Performance Lithium Storage

Recycling silicon-based industrial waste as sustainable sources of Si/SiO2 composites for high-performance Li-ion battery anodes

Green synthesis of high-performance porous carbon coated silicon composite anode for lithium storage based on recycled silicon kerf waste

Low-cost silicon cutting waste reused as a high-power-density silicon-based anode

Recycling Silicon Scrap for Spherical Si-C composite as High-Performance Lithium-ion Battery Anodes

Recycling waste crystalline-silicon solar cells: Application as high performance Si-based anode materials for lithium-ion batteries

A scalable silicon/graphite anode with high silicon content for high-energy lithium-ion batteries

Yolk-shell structured silicon/carbonized polyacrylonitrile composites as anode materials for lithium-ion batteries

Expired milk powder emulsion-derived carbonaceous framework/Si composite as efficient anode for lithium-ion batteries

Facile preparation of silicon/carbon composite with porous architecture for advanced lithium-ion battery anode

Pyromellitic Acid Induced Stable Lithium Ion Batteries Based on Recycled Silicon Flakes

High-Value Utilization of Silicon Cutting Waste and Excrementum Bombycis to Synthesize Silicon–Carbon Composites as Anode Materials for Li-Ion Batteries

Enhanced reversibility and cyclic stability of biomass-derived silicon/carbon anode material for lithium-ion battery

Controllable synthesis of silicon/carbon hollow microspheres using renewable sources for high energy lithium-ion battery

Improved Lithium Storage Capability of Si Anode by Ball-Milling Produced Graphitic Carbon Sheet and Fe3O4 Nanoparticles

Scalable preparation of silicon@graphite/carbon microspheres as high-performance lithium-ion battery anode materials

Spent graphite as promising carbon matrix for high performance SiO/C anode material of Li-ion battery