Abstract:The use of superhydrophobic surfaces in a broad range of applications is receiving a great deal of attention due to their numerous functionalities. However, fabricating these surfaces using low-cost raw materials through green and fluorine-free routes has been a bottleneck in their industrial deployment. This work presents a facile and environmentally friendly strategy to prepare mechanically robust superhydrophobic surfaces with engineered lotus leaf mimetic multiscale hierarchical structures via a hybrid route combining soft imprinting and spin-coating. Direct soft-imprinting lithography onto starch/polyhydroxyurethane/cellulose nanocrystal (SPC) films formed micro-scaled features resembling the pillar architecture of lotus leaf. Spin-coating was then used to assemble a thin layer of low-surface-energy poly(dimethylsiloxane) (PDMS) over these microstructures. Silica nanoparticles (SNPs) were grafted with vinyltriethoxysilane (VTES) to form functional silica nanoparticles (V-SNPs) and subsequently used for the fabrication of superhydrophobic coatings. A further modification of PDMS@SPC film with V-SNPs enabled the interlocking of V-SNPs microparticles within the cross-linked PDMS network. The simultaneous introduction of hierarchical microscale surface topography, the low surface tension of the PDMS layer, and the nanoscale roughness induced by V-SNPs contributed to the fabrication of a superhydrophobic interface with a water contact angle (WCA) of ∼150° and a sliding angle (SA) of <10°. The PDMS/V-SNP@SPC films showed an ∼52% reduction in water vapor transmission rate compared to that of uncoated films. These results indicated that the coating served as an excellent moisture barrier and imparted good hydrophobicity to the film substrate. The coated film surfaces were able to withstand extensive knife scratches, finger-rubbing, jet-water impact, a sandpaper-abrasion test for 20 cycles, and a tape-peeling test for ∼10 repetitions without losing superhydrophobicity, suggesting superior mechanical durability. Self-cleaning behavior was also demonstrated when the surfaces were cleared of artificial dust and various food liquids. The green and innovative approach presented in the current study can potentially serve as an attractive new tool for the development of robust superhydrophobic surfaces without adverse environmental consequences.

Tunable Lotus Leaf Effect by Three-Dimensionally Printed Stretchable Objects

Tunable Lotus Leaf Effect by 3D-printed stretchable objects

Femtosecond Laser Fabricated Elastomeric Superhydrophobic Surface with Stretching-Enhanced Water Repellency

High Resolution Direct Writing Liquid Metal Patterns for Printed Stretchable Electronics

Three-Dimensional Coprinting Of Liquid Metals For Directly Fabricating Stretchable Electronics

Multi-Material 3D Printing of Highly Stretchable Silicone Elastomer.

3D printing of highly stretchable hydrogel with diverse UV curable polymers

Fabricating Super‐Hydrophobic Lotus‐Leaf‐Like Surfaces Through Soft‐Lithographic Imprinting

Tunable Superhydrophobicity from 3D Hierarchically Nano‐Wrinkled Micro‐Pyramidal Architectures

3D Printing of Superhydrophobic Objects with Bulk Nanostructure

Superhydrophobic Surfaces Fabricated by Femtosecond Laser with Tunable Water Adhesion From Lotus Leaf to Rose Petal.

Application of 3D printing for fabrication of superhydrophobic surfaces with reversible wettability

Hierarchical hydrophobic surfaces with controlled dual transition between rose petal effect and lotus effect via structure tailoring or chemical modification

Stretchable superhydrophobic elastomers with on-demand tunable wettability for droplet manipulation and multi-stage reaction

Robust and Eco-Friendly Superhydrophobic Starch Nanohybrid Materials with Engineered Lotus Leaf Mimetic Multiscale Hierarchical Structures

Biomimetic Superhydrophobic Materials through 3D Printing: Progress and Challenges

3D Printed Multifunctional, Hyperelastic Silicone Rubber Foam

Abrasion-resistant superhydrophilic objects with anisotropic water transport capacities prepared by a selective laser sintering 3D printing strategy

Plasma-jet-induced programmable wettability on stretchable carbon nanotube films

Biomimetic fabrication and tunable wetting properties of three-dimensional hierarchical ZnO structures by combining soft lithography templated with lotus leaf and hydrothermal treatments