Abstract:Hard carbon (HC) displays great potential for high-performance sodium-ion batteries (SIBs) due to its cost-effective, simple fabrication and most likely to be commercialized. However, the complicated microstructures of HC lead to difficulties in deeply understanding the structure-performance correlation. Particularly, evaluation of influence of pore structure on Na storage performances is still causing disputes and rational strategies of designing pore architecture of HC are still necessary. In this work, the skillful and controllable phase-inversion method is applied to construct porous HC with abundantly interconnected and permeable tunnel-like pores, which can promote ionic diffusion and improve electrode–electrolyte interfacial affinity. Structure-performance investigation reveals that porous HC with cross-coupled macropore architecture can boost Na storage performances comprehensively. Compared to pristine HC with negligible pores, well-regulated porous HC anodes show an obvious enhancement on initial Coulombic efficiency (ICE) of 68.3% (only 51.5% for pristine HC), reversible capacity of 332.7 mAh g–1 at 0.05 A g–1, rate performance with 67.4% capacity retention at 2 A g–1 (46.5% for pristine HC), and cycling stability with 95% capacity maintained for 90 cycles (86.4% for pristine HC). Additionally, the ICE can be optimized up to 76% by using sodium carboxymethyl cellulose as a binder. This work provides an important view of optimizing Na storage performances of HC anodes by pore engineering, which can be broadened into other electrode materials.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c14738.Additional SEM, EDS, and electrochemical performances including EIS, galvanostatic discharge/charge profiles, and rate performances (Figure S1–S5) and summarization of some porous carbon anodes for SIBs, microstructure and composition information of HCs, and comparing the ICE, rate performance, and cycling stability of various HC anodes with different electrolytes and binders (Tables S1–S3) (PDF)This article has not yet been cited by other publications.

Pore structure engineering of wood-derived hard carbon enables their high-capacity and cycle-stable sodium storage properties

Biomass‐Derived Phosphorus‐Doped Porous Hard Carbon Anode for Stable and High‐Rate Sodium Ion Batteries

Revealing the closed pore formation of waste wood-derived hard carbon for advanced sodium-ion battery

Hard carbon with an opened pore structure for enhanced sodium storage performance

Regulating closed pore structure enables significantly improved sodium storage for hard carbon pyrolyzing at relatively low temperature

Ultrahigh Plateau‐Capacity Sodium Storage by Plugging Open Pores

Sodium‐Ion Batteries: Hard–Soft Carbon Composite Anodes with Synergistic Sodium Storage Performance (adv. Funct. Mater. 24/2019)

3D connected porous structure hard carbon derived from paulownia xylem for high rate performance sodium ion battery anode

Facile synthesis of high quality hard carbon anode from Eucalyptus wood for sodium-ion batteries

Structural design of biomass-derived hard carbon anode materials for superior sodium storage via increasing crystalline cellulose and closing the open pores

Boosting Sodium Storage Performance of Hard Carbon Anodes by Pore Architecture Engineering

Regulating microstructure of walnut shell-derived hard carbon for high rate and long cycling sodium-based dual-ion batteries

High temperature induced abundant closed nanopores for hard carbon as high-performance sodium-ion batteries anodes

Rationally Designing Closed Pore Structure by Carbon Dots to Evoke Sodium Storage Sites of Hard Carbon in Low‐Potential Region

Understanding the Sodium Storage Behavior of Closed Pores/Carbonyl Groups in Hard Carbon

Pore Structure Regulation of Hard Carbon: Towards Fast and High-Capacity Sodium-Ion Storage

A synthesis strategy of 3D carbon nanosheet anode with adsorption/intercalation-filling hybrid mechanism for high-performance sodium/potassium-ion batteries

Regulating Pseudo‐Graphitic Domain and Closed Pores to Facilitate Plateau Sodium Storage Capacity and Kinetics for Hard Carbon

Regulating Pore Structure of Hierarchical Porous Waste Cork‐Derived Hard Carbon Anode for Enhanced Na Storage Performance

Nitrogen/Phosphorus Dual‐Doped Hard Carbon Anode with High Initial Coulombic Efficiency for Superior Sodium Storage