Abstract:Due to the growing electric vehicle market and new trends to reduce fuel consumption for a healthy environment, safe and reliable vehicles are desirable for reasons beyond EV and new technology. Although certain safety standards and legislation are in place and continuously improving but several concerns including battery safety, battery performance, vehicle structure, and battery design to be considered as these affect the overall reliability of Electric vehicles (EVs). Lithium-ion battery technology is considered a good solution to power electric vehicles but potential overheating due to stressful conditions such as mechanical abuse, overcharge, over-discharge, short circuit, and excessive heat from external environment gives rise to safety issues and the occurrence of one or more than one of these can lead to thermal runaway. In most cases, an electric short circuit is a necessary but not sufficient condition for the occurrence of thermal runaway after mechanical abuse. Chemistry of the cell, the resistance of separator to heat, size of the fractured part, and rate of heat transfer all play a role in processes leading to a thermal runaway, if the cell has not gone to thermal runaway right away it can still go into a slow process of electrochemical reaction, releasing gases that eventually could lead to a catastrophic event. This abstract investigates the mechanical behaviour of the separator in the LiCoO2/Graphite cylindrical 18650 cells. Internal short circuit (ISC) behaviour, strain rate dependency, and electrochemical status of the cells (i.e. SOC dependency) are studied to understand failure patterns. Furthermore, a simple and effective constitutive model for the separator layer is formed, facilitating further mechanical analysis and numerical simulation of lithium-ion battery study. The occurrence of ISC is investigated by jellyroll deformation where the casing is removed, and quasi-static load is applied. The numerical simulation model is developed to further investigate sequential structural failures and temperature changes. Simulation results showed good accuracy with experimental results and are useful to predict structural failure of cells. The number of failures including electrolyte leakage, change in shape, sudden voltage drop/temperature rise, and gas venting are observed.

A cell level design and analysis of lithium-ion battery packs

Theoretical and Experimental Investigations on Liquid Immersion Cooling Battery Packs for Electric Vehicles Based on Analysis of Battery Heat Generation Characteristics

Study on the thermal interaction and heat dissipation of cylindrical Lithium-Ion Battery cells

Investigation on Thermal Characteristics and Performance of Cylindrical Lithium-Ion Battery Pack Using P2D Model With Varied Electrode Chemistries

Thermo-electric modeling and analysis of lithium-ion battery pack for E-mobility

Analysis of Internal Short Circuit and Thermal Runaway of Li-Ion Battery Due to Mechanical Abuse

Computational Design and Analysis of a Novel Battery Thermal Management System of a Single 26650 Li-Ion Battery Cell for Electric Vehicle Application

Computational study on hybrid air-PCM cooling inside lithium-ion battery packs with varying number of cells

Thermal characterization of pouch cell using infrared thermography and electrochemical modelling for the Design of Effective Battery Thermal Management System

Numerical study and comparison of heat transferring ability of geometrically modified lithium‐ion cells for battery packs

An experimentally validated electro-thermal EV battery pack model incorporating cycle-life aging and cell-to-cell variations

A Comprehensive Analysis and Experimental Investigation for the Thermal Management of Cell-to-pack Battery System

Development and Analysis of a New Cylindrical Lithium-Ion Battery Thermal Management System

A Novel Hybrid Battery Thermal Management System for Prevention of Thermal Runaway Propagation

Simplified Thermal Runaway Model for Assisting the Design of a Novel Safe Li-Ion Battery Pack

A Multiphysics Model Simulating the Electrochemical, Thermal, and Thermal Runaway Behaviors of Lithium Polymer Battery

(Digital Presentation) Analysis of Thermal Runaway Propagation in Lithium-ion Battery Cells and Modules

Electro-thermal performance evaluation of a prismatic battery pack for an electric vehicle

A novel air-cooled Li-ion battery (LIB) array thermal management system – a numerical analysis

A composite electrochemical-thermal model for the determination of thermal profiles of lithium-ion cell for electric vehicle application