Abstract:The (BiMgFeO4/activated carbon) composite has been developed deploying glycine as fuel in a self-combustion process. It was employed to remove methyl green (MG), a cationic dye, and methyl orange (MO), an anionic dye, from aqueous solutions. It was characterized by specific surface area measurement (BET), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and X-ray diffraction (XRD). FTIR spectra showed three bands located around 548.18 cm-1, 973. cm-1, and 1577.01 cm-1 attributed to the stretching vibrations of Bi-O, Fe-O, Mg-O, and O-H, respectively. The SEM images revealed a highly porous and irregular structure beneficial for the effective diffusion of dye molecules. The sample contains a notable proportion of holes with different sizes of pores. The microcavities observed on the adsorbent surface were conducive to good diffusion of the dye molecules. The composite's mesoporous structure was deduced by BET analysis, which allowed us to determine the material's specific surface area of 20.289 m2/g and its pore diameter of 7.54 nm. X-ray diffraction showed peaks attributed to Fe3O4, MgO, and Bi2O3 (confirming the presence of BiMgFeO4 ferrite) and other peaks attributed to dehydrated hemicellulose and carbon/graphite (confirming the use of activated carbon). The various experimental parameters affecting the performance of this reaction, such as temperature, contact time, initial dye concentration, and adsorbent mass, were studied. The composite's pH zero charge point (pHPZC) was found to be 8.77. The equilibrium isotherms were described using the Freundlich and Langmuir adsorption models. The equilibrium time was a function of the starting dye concentration in the adsorption tests. Adsorption equilibrium for (BiMgFeO4/activated carbon) was formed after 120 min, according to adsorption kinetic analysis. Moreover, the results revealed that pseudo-second-order kinetics could correctly characterize the adsorption of MO and MG on the composite. Adsorption isotherms confirmed that the adsorption process of both dyes onto the (BiMgFeO4/activated carbon) composite was successful. The Langmuir model appears to be best suited to the adsorption of MO and MG on the(BiMgFeO4/activated carbon), with a maximum adsorption capacity of 196.078 mg.g-1 and 192.307 mg.g-1 respectively, at 298 K. The adsorption of the two dyes was spontaneous and exothermic, in line with the thermodynamic parameters associated with the sorbent/adsorbate system. The determination of the isosteric heat of adsorption revealed that physisorption takes place with weak intermolecular interactions between the two dyes and the composite surface.

Multifunctional magnetic composite: MgAl-layered double hydroxide, activated carbon and magnetite on removing both different charged-dyes

Removal of Cationic and Anionic Dyes from Textile Waste Effluent using a Magnetic Nanocomposite made of Activated Carbon and Magnesium-Doped Bismuth Ferrite

Adsorption of Methylene Blue by Halloysite/MnFe2O4 Nanocomposites

Novel synthesis and characterization of magnesium-doped CoFe 2 O 4 nanoparticles –SiO 2 –3-aminopropylethoxysilane– gallic acid magnetic nanocomposite for effective removal of cationic dyes

Modification of magnetite nanoparticles surface with multifunctional ionic liquids for coomassie brilliant blue R-250 dye removal from aqueous solutions

Magnetic Mg-Fe/LDH Intercalated Activated Carbon Composites for Nitrate and Phosphate Removal from Wastewater: Insight into Behavior and Mechanisms

Polydopamine-modification of a magnetic composite constructed from citric acid–cross-linked cyclodextrin and graphene oxide for dye removal from waters

Facile Light-Assisted Preparation of Reusable Magnetic Fe3O4@SiO2@Chitosan Composite for Adsorption of Dyes

Facile preparation and application of magnetic chitosan/fly ash composite as a hybrid biosorbent for the effective removal of direct dyes

Highly Effective Adsorption of Cationic and Anionic Dyes on Magnetic Fe/Ni Nanoparticles Doped Bimodal Mesoporous Carbon.

Preparation and characterization of a novel nanocomposite based on MnCr-layered double oxide and CoFe2O4 spinel ferrite for methyl orange adsorption

Synthesis and characterization of magnetic clay-based carboxymethyl cellulose-acrylic acid hydrogel nanocomposite for methylene blue dye removal from aqueous solution

Removal of Various Cationic Dyes from Aqueous Solutions Using a Kind of Fully Biodegradable Magnetic Composite Microsphere

Synthesis and characterization of a novel ternary magnetic composite for the enhanced adsorption capacity to remove organic dyes

Remarkable Adsorption of Anionic Dye on the Supported Magnetic and Non-Magnetic Polymeric Nanocomposites Including Chitosan/Polyacrylamide and Chitosan/Polylactic Acid

Magnetic Metal–Organic Framework (Fe3O4@MIL-101) Functionalized with Dendrimer: Highly Efficient and Selective Adsorption Removal of Organic Dyes

Effective Magnetic MOFs Adsorbent for the Removal of Bisphenol A, Tetracycline, Congo Red and Methylene Blue Pollutions

Synthesis of New Hybrid Structured Magnetite Crosslinked Poly Ionic Liquid for Efficient Removal of Coomassie Brilliant Blue R-250 Dye in Aqueous Medium

A magnetic bio-based adsorbent prepared from Fe3O4 nanoparticles impregnated with diatom frustules and sodium alginate for methylene blue uptake: advanced modeling and mechanism

Efficient Adsorptive Removal of Cationic Dyes from Aqueous Solution by Magnetic Silica Core-Shell Nanoparticles

Preparation of magnetic activated carbon fibers@Fe3O4 by electrostatic self-assembly method and adsorption properties for methylene blue