Abstract:Manganese oxide with high theoretical specific capacity and intermediate reaction plateau is a promising anode candidate for lithium-ion hybrid capacitors (LIHCs). However, the sluggish kinetics and severe volume expansion have seriously hindered its practical progress. Herein, a mixed-valence manganese oxide confined by a dual-carbon skeleton network (MnOx@C-R) was successfully prepared. Owing to the synergistic effect of the introduction of the dual-carbon skeleton-network structure in a reducing atmosphere, the reasonable pore size distribution, crystallinity, and phase composition have been optimized. The material exhibits excellent lithium storage performance (778.2 mA h g–1 after 10 cycles at 0.1 A g–1), along with excellent rate performance (141.7 mA h g–1 at 5 A g–1) and stable cycling ability (402.4 m Ah g–1 for 1000 cycles at 1 A g–1). Moreover, further characterization displayed the change of the valence state of manganese during the charging/discharging, revealing the source of the excellent electrochemical performance of MnOx@C-R. Therefore, LIHCs were assembled using a MnOx@C-R anode and the activated carbon network with excellent energy density (151 Wh kg–1) and amazing power density (21.9 kW kg–1). This work supplies an alternative strategy for optimizing the lithium storage performance of manganese oxide.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.1c02116.Raman spectra of MnOx@C and MnOx@C-R; TG and DTG of MnOx@C-R; C 1s, O 1s, and N 1s XPS spectra of MnOx@C-R and MnOx@C; SEM images of MnOx; SEM images of MnOx@C; the DFT pore size distribution of MnOx@C-R and MnOx@C; microstructure analysis of MnOx@C; capacity contribution of different voltage ranges of MnOx@C-R; CV curves of MnOx and MnOx@C at 0.1 mV s–1; GCD curves of the first three cycles of MnOx and MnOx@C at 0.1 A g–1; cycling performance of MnOx-R; values of b plotted, and percentage of capacitance contribution at different scanning rates; electrochemical reaction mechanism at different voltage intervals; GITT test; EX-XPS spectra of powder samples and discharging/charging: full spectra and high-resolution O 1s; Nyquist plots of MnOx@C-R and MnOx@C; SEM images of GLC and AGLC; N2 adsorption–desorption isotherms of GLC and AGLC; electrochemical performance of AGLC cathode; GCD curves of LIHCs at different mass ratios of LIHCs; BET parameters of MnOx@C and MnOx@C-R; capacity and ratio of different voltage ranges of MnOx@C-R and MnOx@C; different voltage capacitive behavior at different scan rates; BET parameters of the AGLC and GLC (PDF)This article has not yet been cited by other publications.

Pre-lithiation Optimized Voltage Ranges and MnO2/rGO negative electrodes with Oxygen Vacancies for Enhanced Performance of Lithium-Ion Capacitors

Reduced graphene oxide encapsulated MnO microspheres as an anode for high-rate lithium ion capacitors

Multidimensional Dual-Carbon Skeleton Network Confined MnO x Anode Boosting High-Performance Lithium-Ion Hybrid Capacitors

Enhanced Li-Ion Battery Performance Based on Multisite Oxygen Vacancies in Wo3-X@Rgo Negative Electrode

High-capacity MnCo2O4 supported by reduced graphene oxide as an anode for lithium-ion capacitors

High O/C Ratio Graphene Oxide Anode for Improved Cyclic Performance of Lithium Ion Batteries and the In-Operando Raman Investigation of Its (De)lithiation

Reduced Graphene Oxide‐Modified V 6 O 13 Nanostructure Hybrids with High Pseudo‐Capacitance Contribution as Cathode for High‐Rate Lithium Storage

Intercalation-pseudocapacitance Hybrid Anode for High Rate and Energy Lithium-Ion Capacitors

Engineering of Oxygen Vacancy and Electric‐Field Effect by Encapsulating Lithium Titanate in Reduced Graphene Oxide for Superior Lithium Ion Storage

Regulating oxygen vacancies and coordination environment of manganese dioxide for enhanced high-mass-loading energy storage

A ternary oxygen-vacancy abundant ZnMn2O4/MnCO3/nitrogen-doped reduced graphene oxide hybrid towards superior-performance lithium storage

Effectively Modulating Oxygen Vacancies in Flower-Like δ-MnO2 Nanostructures for Large Capacity and High-Rate Zinc-Ion Storage

Design of pseudocapacitance and amorphization Co-enhanced Mn3O4/graphene sheets nanocomposites for high-performance lithium storage

Porous Nb4N5/rGO Nanocomposite for Ultrahigh-Energy-Density Lithium-Ion Hybrid Capacitor

2D Graphene/MnO Heterostructure with Strongly Stable Interface Enabling High‐Performance Flexible Solid‐state Lithium‐Ion Capacitors

A Novel Cr2O3/MnO2-x Electrode for Lithium-Oxygen Batteries with Low Charge Voltage and High Energy Efficiency

Graphene-modified Nanostructured Vanadium Pentoxide Hybrids with Extraordinary Electrochemical Performance for Li-ion Batteries

Oxygen vacancies activated porous MnO/graphene submicron needle arrays for high-capacity lithium-ion batteries

Novel Lithium-Ion Capacitor Based on a NiO-rGO Composite

Electrochemical Injection Oxygen Vacancies in Layered Ca2Mn3O8for Boosting Zinc-Ion Storage

Regulating Oxygen Substituents with Optimized Redox Activity in Chemically Reduced Graphene Oxide for Aqueous Zn‐Ion Hybrid Capacitor