Abstract:In this study, we successfully synthesized a TiO2/CuO nanocomposite using the aqueous extract of Impatiens tinctoria A.rich. leaf extract as a capping, reducing, and stabilizing agent for the first time in an environmentally friendly, low-cost, straightforward, and sustainable technique. Numerous characterization techniques such as ultraviolet-visible diffuse reflectance spectroscopy (UV-vis-DRS), photoluminescence (PL), Raman spectroscopy, Fourier-transform infrared (FTIR), energy dispersive X-ray (EDX), transmission electron microscopy (TEM), X-ray diffraction (XRD), scanning electron microscopy (SEM), Brunauer-Emmett-Teller (BET), and high resolution TEM (HRTEM) were used to characterize the obtained TiO2/CuO nanocomposite. XRD verified that the TiO2/CuO nanocomposite has an average crystallite size of about 21 nm. The TEM result revealed an average particle size of 29 nm for the biosynthesized TiO2/CuO NC. The HRTEM analysis showed the presence of polycrystalline structures with the predominant lattice fringes 0.352 and 0.19 which were attributed to anatase phase TiO2 in the crystal plane of (101) and (200), respectively. The lattice fringes for monoclinic CuO were observed with values of 0.213 and 0.252 for the lattice planes of (111) and (111̅), respectively. The photoluminescence spectroscopic analysis revealed that the TiO2/CuO NC showed the lowest intensity compared to the pristine TiO2 and CuO indicating the reduction of exciton recombination in the case of the TiO2/CuO NC. The BET analysis showcased the formation of mesoporous materials with a surface area of 87.5 m2/g. The photocatalytic degradation performance of the biosynthesized TiO2, CuO, and TiO2/CuO nanomaterials against the potentially harmful MB dye was tested using the light source of a 150 tungsten-halogen lamp with a wavelength range of 360-2800 nm. The factors affecting photodegradation efficiencies like catalyst dose (20 mg), dye concentration(15 ppm), pH (9), and reaction time (90 min) were optimized for the degradation of the MB dye. The TiO2/CuO catalyst showed the highest degradation efficiency of 99% under the optimized conditions. The degradation rate of the MB dye in the presence of the TiO2/CuO NC was evaluated and found to be fitted to the pseudo-first-order kinetics with a rate constant of 0.03 min-1. The reusability test of the TiO2/CuO catalyst showed its good stability.

S-scheme mechanism in the TiO 2 /Cu 2 O@Cu system toward selective degradation of an electron-rich dye pollutant under solar light

Capability of coupled CdSe/TiO2 heterogeneous structure for photocatalytic degradation and photoconductivity.

The superior photocatalytic performance and DFT insights of S-scheme CuO@TiO2 heterojunction composites for simultaneous degradation of organics

S-scheme heterojunction Cu2V2O7/α-Fe2O3 nanosheets with effective photocatalytic activity toward organic pollutant degradation

Design of an S-scheme photo-catalyst utilizing a Cu-doped perovskite and MOF-5 for simultaneous degradation of organic pollutants under LED light irradiation: Application of EXRSM method for spectra separation and BBD-RSM modeling

Construction of S-scheme g-C3N4/PbTiO3 heterojunction and its highly efficient photocatalytic degradation of organic pollutants under simulated sunlight

Exploring the Formation of S-scheme Heterojunctions in CuFe2O4/Bi2MoO6 Porous Cubes for Photocatalytic Removal of Tetracycline

Efficient visible light performance of MoS2QDs/TiO2 hollow sphere photocatalysts for the degradation of dyes and antibiotics

Preparation of C@CuNi/TiO 2 with a local surface plasmon resonance for photocatalytic degradation of organic dyes and antibiotics under visible light irradiation

Photocatalytic hydrogen evolution coupled with tetracycline photodegradation over S-scheme BaTiO 3 /Ag 2 S dual-function nanofibers: Performance and mechanism

Biosynthesis of TiO2/CuO and Its Application for the Photocatalytic Removal of the Methylene Blue Dye

Enhancement in wastewater refinement through a new cauliflower-like photocatalyst: TiO2/Bi2MoO6/MnSe2 heterojunction

Anchoring SrTiO3 nanoparticles on layered ZnIn2S4 to construct S-scheme heterojunctions as novel photocatalysts for efficient degradation of MO dye

Enhanced photocatalytic performance of CuS/O,N-CNT composite for solar-driven organic contaminant degradation

Rational Design of Magnetic Recyclable S-Scheme FeS2/TiO2 Heterojunction for Photocatalytic Degradation of Rhodamine B dye Under Broad Solar Spectrum

Directly electrospinning synthesized Z-scheme heterojunction TiO2@Ag@Cu2O nanofibers with enhanced photocatalytic degradation activity under solar light irradiation

Development of a novel Z-scheme CoxNi1-xTiO3/CdS (x = 0.5) photocatalyst for the efficient degradation of organic pollutants via a visible-light-driven photocatalytic process

S-scheme photocatalysis induced by ultrathin TiO2(B) nanosheets-anchored hierarchical In2S3 spheres for boosted photocatalytic activity

Construction of S-scheme heterostructured TiO2/g-C3N4 composite microspheres with sunlight-driven photocatalytic activity

S-scheme MgO–TiO2@g-C3N4 nanostructures as efficient photocatalyst for alizarin red S photodegradation

Enhanced antibiotic degradation performance of Cd0.5Zn0.5S/Bi2MoO6 S-scheme photocatalyst by carbon dot modification