Abstract:The increasing environmental concerns and stringent regulations targeting emissions and energy efficiency necessitate innovative material solutions that not only comply with these standards but also enhance performance and sustainability. This study investigates the potential of heterojunction bilayer composites comprising stainless steel (SUS) and polyamide 66 (PA66), aiming to improve fuel efficiency and reduce harmful emissions by achieving lightweight materials. Joining a polymer to SUS is challenging due to the differing physical and chemical properties of each material. To address this, various surface treatment techniques such as blasting, plasma, annealing, and etching were systematically studied to determine their effects on the microstructural, chemical, and mechanical properties of the SUS surface, thereby identifying mechanisms that improve adhesion. Chemical etching using HNO3/HCl and CuSO4/HCl increased surface roughness and mechanical properties, but these properties decreased after annealing. In contrast, K3Fe(CN)6/NaOH treatment increased the lap shear strength after annealing. Blasting increased surface roughness and toughness with increasing spray pressure and further enhanced these properties after annealing. Contact angle measurements indicated that the hydrophilicity of the SUS surface improved with surface treatment and further improved due to microstructure formation after annealing. This study demonstrates that customized surface treatments can significantly enhance the interfacial adhesion and mechanical properties of SUS/polymer heterojunction bilayer composites, and further research is recommended to explore the long-term stability and durability of these treatments under various environmental conditions.

Enhancing the Lap Shear Performance of Resistance-Welded GF/PP Thermoplastic Composite by Modifying Metal Heating Elements with Silane Coupling Agent

Enhancing resistance welding strength of carbon fiber/polycaprolactam thermoplastic composites through coupling agent‐modified metal heating elements

Enhancing the mechanical properties of fiber metal laminate by surface treatment

Multi-Objective Optimization of Resistance Welding Process of GF/PP Composites

Improving the Quality of Resistance Welded Thermoplastic Composite Joints by Applying Ultrasonic

Influence of Process Parameters on the Interlaminar Shear Strength of CF/PEEK Composites In-Situ Consolidated by Laser-Assisted Automated Fiber Placement

In-situ Study of Microstructure and Mechanical Properties of GH3536 Alloy Manufactured by Selective Laser Melting at 750 °C

A Two-Step Combination Strategy for Significantly Enhancing the Interfacial Adhesion of CF/PPS Composites: the Liquid-Phase Oxidation Followed by Grafting of Silane Coupling Agent

Enhancing interfacial bonding in friction stir lap welding of light metal and carbon fiber reinforced polymer composite

Comprehensive influence of silane layer and interfacial thermo-mechanical effect on joining mechanism of silane pretreated Al/CFRP FSLW joint: FEA and experiment

Resistance Welding Joints of CF/PEEK Orthogonal Laminates Strengthened by in situ Grafting of ZnO‐Nanowires: Preparation, Properties, and Mechanism

Rotating gliding arc plasma: Innovative treatment for adhesion improvement between stainless steel heating elements and thermoplastics in resistance welding of composites

The Effect of Surface Treatment on the Resistance Welding Technology for Carbon Fiber/Epoxy Resin Composites

Optimizing Surface Characteristics of Stainless Steel (SUS) for Enhanced Adhesion in Heterojunction Bilayer SUS/Polyamide 66 Composites

Improving the Interfacial Strength of Silicone Resin Composites by Chemically Grafting Silica Nanoparticles on Carbon Fiber

A Novel Method for Reducing the Welding Pressure Requirement in Resistance Welding of Thermoplastic Composites

Investigation on Tempering Process Parameters of In-Situ Consolidation CF/PEEK Thermoplastic Composites

Joining performance and thermal mechanism of stainless steel/GFRP bonding joints via single-side resistance spot welding process

Effects of silanization and silica enrichment of carbon fibers on interfacial properties of methylphenylsilicone resin composites

Improving Interface Bonding Strength of Laser-Welded Steel/cfrtp Hybrid Joint Via Bilayer Silane Film

A Study of the Effects of Moisture on Composite-to-Metal Double-Lap Shear Joints