Abstract:Due to the lack of natural water resources and the rapid growth of population and economy, China is currently facing the pressing challenge of water shortage. Current evidence suggests that the traditional water resources including surface water and groundwater could not be enough to sustain increasing water demand which has been projected to hit 8.80x10(11) m(3) by 2030. Facing to such a critical situation, it is absolutely necessary to explore non-traditional water resources in order to meet future water demand. As such, municipal wastewater should be regarded as an emerging water resource rather than a waste. Presently various biological processes with activated sludge as the core have been commonly adopted for municipal wastewater treatment in China. However, these conventional activated sludge processes have been suffering from high energy consumption, large amount of excess sludge, low resource recovery efficiency, greenhouse gas emission, etc. On the other hand, the process upgrading is becoming inevitable in order for the effluent to meet increasingly strict national discharge standards. However, it should be pointed out that the current practice of process upgrading is mainly based on a simple add-on-driven philosophy, i.e., the existing biological treatment processes are expanded by including various posttreatment units for polishing soluble COD, nitrogen and phosphorus. Obviously, such an add-on-based practice inevitably leads to extremely complex process configuration, difficulty in process operation, increasing treatment costs, energy consumption and large footprint. In fact, a fundamental question to be addressed is what the primary function of municipal wastewater treatment is in the future. This article thus argues that future wastewater treatment plant should primarily serve as a nontraditional water factory that is able to supply high-quality product water, with the ultimate goal of closing wastewater-water loop. One of such examples is the integrated anaerobic membrane bioreactor and reverse osmosis process that offers a feasible engineering solution for producing high-grade water from municipal wastewater, with substantially reduced energy consumption and excess sludge production. In this integrated process, almost all soluble COD in municipal wastewater could be directly converted to biomethane gas with minimized sludge production, while the majority of soluble nutrients (e.g., ammonium and phosphate) could be effectively rejected by reverse osmosis membrane. However, in some circumstances, the ammonium concentration in reverse osmosis permeate might not meet the standards for high-grade product water when treating municipal wastewater with high ammonium concentration. As such, adsorption could be considered as a promising technology for polishing the effluent from the proposed integrated process, and different kinds of adsorbents for ammonium removal were also reviewed, ranging from conventional zeolite, biochar, ion exchange resin to advanced nanomaterials. It appears that more efforts are needed to develop novel adsorbents with high adsorption capacity and selectivity for ammonium, which are becoming possible with advances of material science and engineering. Consequently, it is demonstrated in this review that municipal wastewater as an important fresh water resource should first be fully collected and then reclaimed to high-grade product water which is a game changer in closing water loop, while helping to prolong water life cycle and alleviating the pressure of urban water shortage.

Circular economy-driven ammonium recovery from municipal wastewater: State of the art, challenges and solutions forward

Biological nitrogen removal from sewage via anammox: Recent advances

Mainstream Ammonium Recovery to Advance Sustainable Urban Wastewater Management

Strategies for ammonia recovery from wastewater: a review

New progress of ammonia recovery during ammonia nitrogen removal from various wastewaters

Capture of wastewater ammonium by microalgal-bacterial granular sludge: A green-to-green engineering solution for carbon neutrality

One Step Further to Closed Water Loop: Reclamation of Municipal Wastewater to High-Grade Product Water

Nitrogen cycling and resource recovery from aquaculture wastewater treatment systems: a review

Deep Purification of Low-Strength Ammonium-Containing Wastewater with ANRE Process

Ammonia recovery from nitrate-rich wastewater using a membrane-free electrochemical system

En route to a circular nitrogen economy

Technical revolution of biological nitrogen removal from municipal wastewater: Recent advances in Anammox research and application

Challenges and Countermeasures for Application of ANAMMOX Biotechnology

Nitrogen recovery from wastewater by microbial assimilation – A review

Circular economy is game-changing municipal wastewater treatment technology towards energy and carbon neutrality

Novel biological nitrogen removal process for the treatment of wastewater with low carbon to nitrogen ratio: A review

Recent Advances in Autotrophic Biological Nitrogen Removal for Low Carbon Wastewater: A Review

Anammox-based technologies for municipal sewage nitrogen removal: Advances in implementation strategies and existing obstacles

Necessity of direct energy and ammonium recovery for carbon neutral municipal wastewater reclamation in an innovative anaerobic MBR-biochar adsorption-reverse osmosis process

Towards advanced nitrogen removal and optimal energy recovery from leachate: A critical review of anammox-based processes

Technologies for biological removal and recovery of nitrogen from wastewater