Abstract:The shuttle effect and sluggish conversion kinetics of lithium polysulfides (LiPSs) restrict the practical application of lithium–sulfur (Li–S) batteries. Herein, we introduce nickel cobaltite/carbon nanofiber (NiCo2O4/CNF) composites as a chemical trapper and conversion accelerator for LiPSs. The experiment and density functional theory indicate that polar NiCo2O4 can strongly trap polysulfides through Ni–S and Co–S bonds. The CNF network provides structural stability and serves as a second barrier for polysulfides. Systematic studies on the solid(sulfur)–liquid(polysulfides)–solid(sulfide) conversion reactions qualitatively and quantitatively demonstrate that the well-designed NiCo2O4/CNF interface with strong polysulfides affinity, affluent polar nucleation sites, and fast Li+/e– transport can noteworthily catalyze the liquid-phase conversion of LiPSs and the solid-phase deposition of lithium sulfide (Li2S) and protect the lithium anode as well. Thus, the NiCo2O4/CNF-based batteries can exhibit a high rate capability of 870 mAh g–1 at 5 C and excellent cycling performance evidenced by a capacity retention of 95% after 200 cycles at 0.1 C with a sulfur loading of 6.3 mg cm–2. Further increasing the sulfur loading to 7.9 mg cm–2 and with a lean electrolyte/sulfur (E/S) ratio of 7.2 μL mgs–1, the Li–S battery can deliver a high areal capacity of 8.1 mAh cm–2.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.0c08049?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.0c08049</a>.Experimental section; SEM and TEM images of the NiCo precursor; synthetic procedure, XRD pattern, and nitrogen adsorption–desorption isotherm of NiCo2O4; SEM images and digital photographs of different separators; optical pictures of polysulfide permeation measurements; thermogravimetric analysis of the AB/S composite; Tafel plots; CV curves of the NiCo2O4/CNF-based battery; SEM images of Li2S deposition; GDC and EIS profiles of batteries; cycling performance of NiCo2O4/CNF-based batteries; SEM and digital photographs of different separators after cycling; SEM images, EDS mapping, and XPS spectra of the lithium anode; rate performance; comparison of rate performance and cycling stability of Li–S batteries (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c08049/suppl_file/sc0c08049_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Cobalt Nitride Nanoparticles Encapsulated in N‐Doped Carbon Nanotubes Modified Separator of Li–S Battery Achieving the Synergistic Effect of Restriction‐Adsorption‐Catalysis of Polysulfides

Three-Dimensional Ordered Fevo4 Nanocatalyst-Modified Separator Enables Suppressed Polysulfides Shuttling and Boosted Redox Conversion in Li-S Batteries

Separator modified by a caterpillar-like composite with interconnected N-doped carbon nanotubes decorated Co-MnO heterointerface enabling robust polysulfide adsorption and catalytic conversion for Li-S batteries

Modified separators boost polysulfides adsorption-catalysis in lithium-sulfur batteries from Ni@Co hetero-nanocrystals into CNT-porous carbon dual frameworks

Nanoporous Cobalt–Nitrogen–Carbon Catalyst-Based Multifunctional Interlayer for Enhanced Li–S Battery Performance

Cobalt and Molybdenum Carbide Nanoparticles Grafted on Nitrogen‐Doped Carbon Nanotubes as Efficient Chemical Anchors and Polysulfide Conversion Catalysts for Lithium‐Sulfur Batteries

Construction of Co@N-CNTs grown on N-MoxC nanosheets for separator modification to enhance adsorption and catalytic conversion of polysulfides in Li-S batteries

Facile and low-cost preparation of Co and N co-doped hierarchical porous carbon as a functional separator for Li-S batteries

Multifunctional Ni/NiO heterostructure nanoparticles doped carbon nanorods modified separator for enhancing Li–S battery performance

Boosting the Rate Performance of Li-S Batteries Via Highly Dispersed Cobalt Nanoparticles Embedded into Nitrogen-Doped Hierarchical Porous Carbon

Accelerating catalytic conversion and chemisorption of polysulfides for advanced Li-S batteries from incorporating Fe0.64Ni0.36@Co5.47N hetero-nanocrystals into boron carbonitride nanotubes

NiCo 2 O 4 /CNF Separator Modifiers for Trapping and Catalyzing Polysulfides for High-Performance Lithium–Sulfur Batteries with High Sulfur Loadings and Lean Electrolytes

Bimetal CoNi Active Sites on Mesoporous Carbon Nanosheets to Kinetically Boost Lithium−Sulfur Batteries

Preparation of Carbon Nanotubes‐hollow Co 9 S 8 Composite and Its Use in Separator Modification for Lithium‐sulfur Battery

3D catalytic MOF-based nanocomposite as separator coatings for high-performance Li-S battery

MOF derived cobalt-nickel bimetallic phosphide (CoNiP) modified separator to enhance the polysulfide adsorption-catalysis for superior lithium-sulfur batteries

Nitrogen‐Deficient Graphitic Carbon Nitride/Carbon Nanotube as Polysulfide Barrier of High‐Performance Lithium‐Sulfur Batteries

Carbon-Based Porous Bimetallic Phosphide in CNT Network As a Separator for Li–S Batteries

A multifunctional separator modified with cobalt and nitrogen co-doped porous carbon nanofibers for Li–S batteries

Separator Modified by Cobalt‐Embedded Carbon Nanosheets Enabling Chemisorption and Catalytic Effects of Polysulfides for High‐Energy‐Density Lithium‐Sulfur Batteries

Nitrogen-doped carbon nanorods embedded with cobalt nanoparticles as separator coatings for high-performance lithium-sulfur batteries