Abstract:Quantum dot sensitized solar cells (QDSSCs) are attractive photovoltaic devices due to their simplicity and low material requirements. However, efforts to realize high efficiencies in QDSSCs have often been offset by complicated processes and expensive or toxic materials, significantly limiting their useful application. In this work, we have realized for the first time, high performance PbS QDSSCs based on TiO2 nanotube arrays (NTAs) via an in situ chemical deposition method controlled by a low electric field. An efficiency, η, of ~3.41% under full sun illumination has been achieved, which is 133.6% higher than the best result previously reported for a simple system without doping or co-sensitizing, and comparable to systems with additional chemicals. Furthermore, a high open-circuit voltage (0.64 V), short-circuit current (8.48 mA cm(-2)) and fill factor (0.63) have been achieved. A great increase in the quantity of the loaded quantum dots (QDs) in the NTAs was obtained from the in situ electric field assisted chemical bath deposition (EACBD) process, which was the most significant contributing factor with respect to the high JSC. The high VOC and FF have been attributed to a much shorter electron path, less structural and electronic defects, and lower recombination in the ordered TiO2 NTAs produced by oscillating anodic voltage. Besides, the optimal film thickness (~4 μm) based on the NTAs was much thinner than that of the control cell based on nanoporous film (~30.0 μm). This investigation can hopefully offer an effective way of realizing high performance QDSSCs and QD growth/installation in other nanostructures as well.

Development of SnS quantum dot hybrid solar cells on TiO2 nanorods

Synthesis and Characterization of Bi2S3 Quantum Dot-Sensitized TiO2 Nanorod Arrays Coated with ZnSe Passivation Layers

Formation and Photoluminescence of Si Quantum Dots in Sio2/Si3n4 Hybrid Matrix for All-Si Tandem Solar Cells

Construction of TiO2 NP@TiO2 NT Double-Layered Structural Photoanode to Enhance Photovoltaic Performance of CdSe/CdS Quantum Dots Sensitized Solar Cells

Nanotube Film for Quantum Dots Sensitized Solar Cells

Translucent TiO2 Nanotube Film for Quantum Dots Sensitized Solar Cells

CuInS2 quantum dot-sensitized TiO2 nanorod array photoelectrodes: synthesis and performance optimization

Co-Sensitising Cadmium Selenide And Cadmium Telluride Quantum Dots On Titanium Dioxide Nanorods Via The Silar Method

Fabrication of TiO 2 nanorod array/semiconductor nanocrystal hybrid structure for photovoltaic applications

Development of SnS/In2S3 core-shell nanoparticles for solar cell application

Fabrication of heterostructure multilayer devices through the optimization of Bi-metal sulfides for high-performance quantum dot-sensitized solar cells

Study on silicon quantum dots sensitized solar cells

A Novel Method for the Preparation of CdS Quantum Dots Sensitized Solar Cells Based on Free-Standing and Through-Hole TiO2 Nanotube Arrays

Nanostructured TiO2 sensitized with CuS quantum dots for solar energy conversion

Sno2 Nanorod@Tio2 Hybrid Material For Dye-Sensitized Solar Cells

Facile one-step fabrication of CdS0.12Se0.88 quantum dots with a ZnSe/ZnS-passivation layer for highly efficient quantum dot sensitized solar cells

High Performance PbS Quantum Dot Sensitized Solar Cells Via Electric Field Assisted in Situ Chemical Deposition on Modulated TiO2 Nanotube Arrays.

Preparation of SnS2 Colloidal Quantum Dots and Their Application in Organic/inorganic Hybrid Solar Cells

Hybrid TiO2–SnO2 Nanotube Arrays for Dye-Sensitized Solar Cells

SnS Quantum Dots As Hole Transporter of Perovskite Solar Cells

Energetic Alignment in Nontoxic Sns Quantum Dot-Sensitized Solar Cell Employing Spiro-Ometad As the Solid-State Electrolyte