Electrochemical Determination of 2,4-Dichlorophenol in Industrial Wastewater Using Bimetallic Metal-Organic Framework (MOF) Functionalized Graphene Oxide (GO) and Cetyltrimethylammonium Bromide (CTAB)
Manh B. Nguyen The Huy Truong Thi Hai Yen Pham Ngoc Tien Nguyen Khac Huy Chu Phung Quang Hai Tran Thi Thoa Nguyen Hong Phong Pham Vu Thi Thu Ha a Institute of Chemistry,Vietnam Academy of Science and Technology (VAST),Hanoi,Vietnamb Hanoi University of Industry,Hanoi,Vietnamc Military Institute of Chemical and Environmental Engineering,Hanoi,Vietnamd Graduate University of Science and Technology,VAST,Hanoi,Vietnam
DOI: https://doi.org/10.1080/00032719.2024.2413176
2024-10-12
Analytical Letters
Abstract:This study reports a sensor using a bimetallic metal-organic framework combined with 1,3,5-benzenetricarboxylic acid (BTC) (ZrCuBTC MOFs) functionalized graphene oxide (GO) and cetyltrimethylammonium bromide (CTAB) to determine the concentration of 2,4-dichlorophenol (2,4-DCP) in industrial wastewater. ZrCuBTC/GO was cast on a bare glassy carbon electrode followed by CTAB for analyte adsorption to produce the CTAB/ZrCuBTC/GO@GCE. The ZrCuBTC/GO was characterized by X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), Fourier transform infrared spectrometry (FTIR), X-ray diffraction (XRD), and N 2 adsorption–desorption analysis. The electrochemical properties of these materials and 2,4-DCP on the CTAB/ZrCuBTC/GO were investigated by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and differential pulse voltammetry (DPV). The ZrCuBTC/GO had particle sizes from 20 to 40 nm, a pore diameter of 2.71 nm, a pore volume of 0.793 cm 3 g −1 , and a surface area of 1227 m 2 g −1 . Under the optimized conditions, the sensor had excellent electrocatalytic activity and high selectivity for 2,4-DCP. Linear ranges from 0.01 to 0.1, 0.1 to 1.5, and 1.5 to 30 μM were obtained with a low detection limit of 8 nM and excellent reproducibility of 2.71%. Wastewater before and after spiking was analyzed using the sensor and high-performance liquid chromatography (HPLC). The results were comparable with recoveries from 94.9 to 110.3 and 88.6 to 100.2%, respectively. Therefore the developed approach was suitable for the determination of 2,4-DCP in environmental samples.
chemistry, analytical