Abstract:To develop in-depth understanding of metallurgical phenomena for completeness, mechanical heterogeneity is kinetically and thermodynamically explained by thorough microstructure characterization of engineering materials, e.g. polycrystalline nickel-based superalloy, for alleviation of weldability-related problems during laser-induced keyhole fabrication. Because of nonequilibrium solidification behavior inside weld pool, finer γ phase dendrite substructure is confined to partition-resistant keyhole bottom part, coarser dendrite is crystallography-independently circumscribed at partition-vulnerable neck transition region of full penetration weld, and thus microstructure is lack of homogeneity. Abundance of segregation-driven eutectic phase or intermetallic phase in the interdendrite area throughout weld is essentially attributable to nonequilibrium solidification conditions, and morphologically increases susceptibility to mechanical properties deterioration. As a result of γ phase instability, Niobium-aided Laves/γ eutectic reaction in the vicinity of dendrite interstices at terminal stage of solidification contributes to severe dendrite boundaries brittleness, impairs mechanical properties, which is consistent with metallography and fractography results, and is more deleterious to weldability, since solute redistribution and supersaturation adversely exacerbate segregation behavior in the residual interdendrite liquid, especially asymmetric weld pool shape. There is inverse parabolic relationship between secondary dendrite arm spacing and solute partition coefficient, when location varies from nail-shaped weld upper site to bottom site. Chemical, microstructural and mechanical heterogeneities are more geometrically favorable in the curvature-related neck transition region. In addition, the mechanism of thermal, metallurgical and mechanical inhomogeneities, which are attributed to asymmetric weld pool shape, is consequently proposed. Untoward metallurgical phenomena, such as microstructure heterogeneity and brittle Niobium-rich Laves/γ eutectic phases mitigate strength, ductility and toughness of weld. In order to macroscopically and microscopically satisfy superior mechanical properties requirement, chemistry and microstructure of high quality weld are metallurgically controlled. Fruitful metallurgical information and mechanical data further support the reasonable explanations. It is imperative to progressively advance welding metallurgy, weldability and fabricability of intricate shape for welding defects minimization, suppress segregation and further develop mechanical properties through viable design and control of laser processing, simultaneously.

Optical Evidence of Compositional Fractioning Between Plasma‐Condensed and Melt Pool Matter

Experimental and numerical study of spatter formation and composition change in fiber laser welding of aluminum alloy

High Resolution Analysis of Elemental Partitioning in Nickel-Base Superalloy Welds Using Atom Probe Field Ion Microscopy

Molten Pool Behavior and Solidification Characterization in Steady Magnetic Field Assisted Laser-Mig Hybrid Welding of Aluminum Alloy

Species distribution in laser-induced plasma on the surface of binary miscible alloy

Laser-induced fluorescence applied to laser welding of austenitic stainless steel for dilute alloying element detection

Coupled Mechanisms of the Keyhole, Energy Transfer and Compositional Change Associated with the Variable Polarity Plasma Arc Process

Calculation of Radiative Properties for [82%Ar-18%CO2]-Fe Plasmas in MAG Welding Arc

The characteristics and dynamics of fused silica-aluminum alloy welding during mJ-level femtosecond laser

Thermal, Metallurgical and Mechanical Determinants of Laminar Nickel/Aluminum Dissimilar Alloys during Laser-material Interaction Part I: Nickel-based Superalloy

Melt pool and microstructure manipulation using diffractive holographic elements in high power conduction laser welding

A Study on the Relationship Between Spectral Characterization and Composition of Plasma in Laser Additive Manufacturing of Gradient Materials

Solidification Behavior and Microstructure Evolution in Dissimilar Electron Beam Welds Between Commercially Pure Iron and Nickel

Real-Time Measurement of Seam Strength Using Optical Spectroscopy for Al–Li Alloy in Laser Beam Welding

Diffusion-limited Nonequilibrium Phase Transformation of Nickel/Aluminum Dissimilar Materials during Laser Welding Part I: Precipitation-strengthened Polycrystalline Nickel-based Superalloy

Study of metal transfer in CO2 laser+GMAW-P hybrid welding using argon-helium mixtures

Microstructure and Grain Evolution Mechanisms of Copper/steel Explosive Welding Interface

Microstructural Inhomogeneity in the Fusion Zone of Laser Welds

Direct mechanistic connection between acoustic signals and melt pool morphology during laser powder bed fusion

The Investigation of Plume and Spatter Signatures on Melted States in Selective Laser Melting

Analysis of dynamic plasma behaviors in gas metal arc welding by imaging spectroscopy