Abstract:Microstructured optical fibers (MOFs) have been widely utilized for optofluidic waveguides, in which the micro-holes along the MOFs act as microfluidic channels for various applications such as supercontiuum sources and aqueous solution sensors. The air hole diameter of MOFs is generally several microns to tens of microns, which is much smaller compared with traditional fluid-core fiber waveguide. However, for specific applications such as ultra-trace analysis and low-threshold fluidic lasers, this channel dimension is still relatively large. The slot waveguide could confine light in a subwavelength-scale channel, however, the short propagation length and high loss of the waveguide may limit its applications. Here we propose an approach to achieve low-loss subwavelength-scale optofluidic waveguide in MOFs. As shown in Fig. 1(a), the hollow-core of the MOF is tapered down to a subwavelength-scale, and then the MOF is selectively infiltrated with aqueous solution. So light could be confined in an aqueous core surrounded by a tapered air-silica cladding. As the refractive index of the cladding is close to that of air, the index contrast between the fluidic core and the cladding is high enough to provide an efficient index-guiding in a subwavelength-scale core. The mode pattern of a fundamental mode in a tapered aqueous core MOF is calculated when the core diameter is 600nm (Fig. 1(b)). As shown in Fig. 1(c), we compare our tapered air-silica cladding with Teflon cladding. At the wavelength of 633 nm, the light with the fraction of power over 65% could be guided in the aqueous core with the size of 600 nm, which is 4 times higher than that in a core surrounded by a Teflon cladding, which has an overlap fraction of only 15.7%. So the method we propose has obvious advantages over the traditional method using Teflon material. It provides a novel platform for low-loss subwavelength-scale fluid-core guiding with the long interaction length, and therefore have various potential applications.

Electrically Tunable Liquid-Crystal-Core Optical Channel Waveguide

Low threshold optical attenuator based on electrically tunable liquid crystal cladding waveguide

KLu(WO4)2/SiO2 Tapered Waveguide Platform for Sensing Applications

Liquid‐Crystal‐Mediated Active Waveguides Toward Programmable Integrated Optics

Design of tunable wavelength microcavity organic electroluminescent diode with liquid crystal

Using liquid crystals as tuneable waveplates in femtosecond laser direct written waveguides

Liquid-crystal clad tunable wavelength de-multiplexer and coupler/filter in silicon nitride rib waveguide structure

Tunable Ultra‐Narrow Linewidth Light Source Through Liquid Crystal‐Assisted Mini‐Bound‐States‐In‐Continuum Cavities

Modeling and Characterization of Tunable Photonic Crystal Waveguides Based on Two-Dimensional Periodic Arrays of Silicon Pillars

Liquid Crystal 3D Optical Waveguides Based on Photoalignment

Waveguide Display System Based on Liquid Crystal Polarization Volume Grating

All Optical Tunable Nematic Liquid Crystal Waveguide

Wide Tunable Laser Based on Electrically Regulated Bandwidth Broadening in Polymer-Stabilized Cholesteric Liquid Crystal

Low loss hollow-core waveguide on a silicon substrate

Optical Add-Drop Multiplexer with Hexagonal-Hole Lattice PC Slab Waveguides

Electro-Optic Silicon Modulator With Horizontal Photonic Crystal Slot Slab

Manufacturing of double-layered multimode optical waveguides in glass substrate

Tunable Optical Filter Based on Liquid Crystal Fabry-Perot Etalon

High Index Contrast Subwavelength-Scale Optofluidic Waveguide in Mofs

Mode-tunable Low-Loss Waveguides in Glass for Visible Light Photonic Integrated Devices

Dynamic Dipole Moment of Luminescent Liquid Crystals Enabled Highly Efficient Active Waveguide Materials Design and Synthesis