Abstract:Optimizing the locations of sewage treatment plants has enormous practical significance. In this study, a large-system mathematical model was developed for optimizing the locations of sewage treatment plants within a system and designing the associated pumping station pipe network. Head loss of pipe segments in the pipe network was the coupling constraint, the economic flow rate of pipe segments was determined by the feasible region constraints of decision variables, and the design variables were the sewage treatment plant locations, the design head of the pumping stations, the pipeline economic life, and the pipe diameter of divided pipe segments. The minimum total annual cost of the sewage treatment plant(s) and the pumping station pipe network was the objective function. A large-system quadratic orthogonal test-based selection method was used with a discrete enumeration comparison and selection method to determine pipeline economic life. A dynamic programming method was used to determine the pipe diameter of the divided pipe segments. By comparing the total annual cost of the sewage treatment plants and the associated pumping station pipe network corresponding to different pipeline economic lifetimes, the optimal solution that generates the minimum total annual cost can be identified. The sewage treatment plant and pumping station pipe network in Taizhou, China, was used as an example to compare and analyze optimization results. The new optimization method would have produced much lower annual cost than that of the existing system. This study provides valuable theoretical references for probing the layout design of urban sewage treatment plants corresponding to different pipeline economic lifetimes.

Optimal design of batch water-using system with wastewater reuse and centralized treatment through scheduling

Optimal Dispatching of Large-scale Water Supply System

Multi-Purposes Mixed Optimal Operation Schedule for Water Supply System

Pump Scheduling Optimization in Water Distribution System Based on Mixed Integer Linear Programming

Optimal scheduling and analysis of booster chlorination in water distribution network based on desired chlorine residual mass concentration

Energy and Water Management for Industrial Large-Scale Water Networks: A Systematic Simultaneous Optimization Approach

Design Methodology for Flexible Multiple Plant Water Networks

Optimal Operation of Raw Water System Including Multi-Sources in Abundant Water Period

Optimal Operation of Residual Chlorine Concentration in Multi-Source Water Distribution System

Design Energy Efficient Water Utilization Systems Allowing Operation Split

Optimum rescheduling of water networks for batch processes using a goal programming technique

Design Water-Using Network with Multiple Contaminants by Step by Step Linear Programming

Optimization Model for Wastewater Reclamation and Reuse Planning Based on Analye of Multiple Resources and Users

Energy-efficient and Reliable Coordinated Scheduling for Water Distribution Systems: Enhancing Hydraulic Conditions and Water Quality

Scheduling of Batch Operation for a Wastewater Treatment Plant under Time-of-Use Electricity Pricing.

Simultaneous optimization approach for integrated water-allocation and heat-exchange networks

Simulation of water resource allocation for sustainable urban development: An integrated optimization approach

Optimization Model for Water Distribution System Design

Modeling and Control of Water Purification Systems

Optimizing the system-wide layout of sewage treatment plants based on enumeration and the orthogonal test

Stochastic Optimization Model for Water Allocation on a Watershed Scale Considering Wetland’s Ecological Water Requirement