Abstract:<p>Rapid solidification cellular structures are known to play a crucial role in helping achieve high strength and high ductility in 316L austenitic stainless steels fabricated by laser powder-bed-fusion (L-PBF). Despite this, the understanding of their intrinsic characteristics (e.g., crystallographic orientations, dislocations, precipitates, elemental segregations) and the respective impacts on the material's strength and thermal stability remains nebulous. We conduct several dedicated transmission electron microscopy (TEM) studies to investigate these strengthening mechanisms and identified that cell walls follow specific crystallographic orientations. The high density of tangled dislocations inside cell walls are found to have a higher tendency to dissociate, forming wider stacking faults while oxide precipitates are confined inside cell walls. These features act as barriers to moving dislocations upon plastic deformation and contribute to the high strength. Our dislocation dynamic simulations indicate that segregated particles are effective in blocking dislocations locally, helping the formation of dislocation cells and participating to the material strengthening. To study the thermal stability of L-PBF 316L SS, we perform systematic post-processing heat treatments from 400-1200°C. Microstructure characterizations using electron backscatter diffraction, TEM, and synchrotron X-ray diffraction coupled with dislocation dynamics and CALPHAD simulations and tensile testing reveal three heat treatment zones where the structure-property relationship can be tuned. After annealing up to 600°C, the microstructure remains stable; but the work hardening behavior is altered with a material that retains high strength and high ductility. Annealing between 600-1000°C activates elemental diffusion and gradual disappearance of cell walls, leading to a sharp drop in yield strength and a tradeoff between strength and ductility. Low-angle grain boundaries remain stable up to 1000°C while the average grain size defined by high angle grain boundaries is near constant at annealing temperatures up to 800°C. Annealing above 1100°C removes all L-PBF microstructure footprints and renders a conventional-like microstructure. Compared to conventional materials, L-PBF 316LSS displays substantially higher thermal stability and superior performance at elevated temperatures.</p>

Additively manufactured 316L stainless steel via laser powder directed energy deposition (LP-DED): Mechanical properties at cryogenic and elevated temperatures

Thermal stability and microstructural evolution of additively manufactured 316L stainless steel by laser powder bed fusion at 500–800 °C

Investigation of the Properties of 316L Stainless Steel after AM and Heat Treatment

Mechanical performance and deformation mechanisms at cryogenic temperatures of 316L stainless steel processed by laser powder bed fusion: In situ neutron diffraction

Strengthening Mechanisms and Strain Hardening Behavior of 316L Stainless Steel Manufactured by Laser‐Based Powder Bed Fusion

Fatigue Response of Additive-Manufactured 316L Stainless Steel

Microstructural Characterization and Mechanical Properties of L-PBF Processed 316 L at Cryogenic Temperature

Deformation Mechanisms of Selective Laser Melted 316l Austenitic Stainless Steel in High Temperature Low Cycle Fatigue

Case Study of the Tensile Fracture Investigation of Additive Manufactured Austenitic Stainless Steels Treated at Cryogenic Conditions

Micro-Scale Deformation Aspects of Additively Fabricated Stainless Steel 316L under Compression

Investigation of Microstructures and Tensile Properties of 316L Stainless Steel Fabricated via Laser Powder Bed Fusion

Effect of 316L Stainless Steel Fabrication on Oxidation Resistance, Surface Morphology, and Hot Tensile Behavior

Additive manufacturing of duplex stainless steel by DED-LB/M and PBF-LB/M – process-material-property relationships

Tensile Properties and Fracture Analysis of Duplex (2205) and Super Duplex (2507) Stainless Steels, Produced via Laser Powder Bed Fusion Additive Manufacturing

Exploring structural origins responsible for the exceptional mechanical property of additively manufactured 316L stainless steel via in-situ and comparative investigations

Mechanical properties and microstructure evolution of additive manufactured 316L stainless steel under dynamic loading

New insights on cellular structures strengthening mechanisms and thermal stability of an austenitic stainless steel fabricated by laser powder-bed-fusion

Tailoring the Microstructural and Mechanical Properties of 316L Stainless Steel Manufactured by Laser Powder Bed Fusion

A new laser remelting strategy for direct energy deposition of 316L stainless steel

Strengthening Mechanisms in Selective Laser Melted 316L Stainless Steel

Determining the Necessity of Post‐Processing Heat Treatment for the 316L Stainless Steel Manufactured by Laser Powder Bed Fusion through Evaluation of Mechanical and Corrosion Properties