Abstract:Traditional prediction of erosion focuses on the use of velocity and impact angle of particles as independent variables in analytically derived models. This approach is most suitable for numerical predictions of erosion in disperse flow fields where particle trajectories may easily be followed prior to impact. For dense particle flows, the prediction of individual particle or particle cluster movement is nearly never attempted by following trajectories. Instead, two-fluid Eulerian–Eulerian approaches are used in which a continuous particle fluid phase is considered.The present study shows that the impact velocity and angle of attack of particles at the eroding surface are difficult to obtain for dense flows, thus being difficult to consider as parameters for predicting erosion. Instead, it is proposed that the normal and the shearing components of the viscous dissipation of the particulate phase are more suitable as independent flow variables governing the erosion process. These variables describe deformation and cutting wear processes, respectively, and are readily derived from the flow field.Eulerian erosion models are proposed, based on these independent variables. It is possible to implement previous results and theories concerning the material–mechanical interaction between the abrasive and an eroding surface to achieve model improvements. In this work, only a simple model taking into account a threshold elastic strain limit is proposed, to more correctly model the deformation wear.The particle-flow boundary condition — a partial-slip condition — significantly influences the erosion process, particularly the cutting erosion. The boundary condition depends on parameters such as the local particle phase flow, the mean diameter and the sharpness of the abrasive as well as the surface roughness.A simple 2D test application — a jet stream of particles impinging a tilted plate — is presented, and the qualitative angular behaviour of ductile and brittle erosion is reproduced at the target position. A scheme is presented for determination of material constants and suitable boundary conditions to be used in the proposed erosion models.

Erosion of cohesive grains by an impinging turbulent jet

Numerical Investigation of Sand-Bed Erosion by an Upward Water Jet

Experimental Observations on the Initiation of Sand-Bed Erosion by an Upward Water Jet

Coarse-grained CFD-DEM Simulation of Elbow Erosion Induced by Dilute Gas-Solid Flow: A Multi-Level Study

Erosion dynamics of a wet granular medium

Erosion of a granular bed driven by laminar fluid flow

Erosion Characterization Of Gas-Solid Jets Impinging Onto Inclined Surfaces

Threshold of surface erosion of cohesive sediments

Eulerian-Lagrangian investigation of erosion wear within a water-submerged Jet: Two-way coupling

Effects of Coherent Structures on Nanoparticle Coagulation and Dispersion in a Round Jet

The effect of grain size on erosion and entrainment in dry granular flows

The effects of interparticle cohesion on the collapse of granular columns

A model for the erosion onset of a granular bed sheared by a viscous fluid

Particle Size Distribution in a Planar Jet Flow Undergoing Shear-Induced Coagulation and Breakage

Experimental and Computational Investigations to Evaluate the Effects of Fluid Viscosity and Particle Size on Erosion Damage

Scaling of Erosion Rate in Subsonic Jet Experiments and Apollo Lunar Module Landings

Numerical Study of Solid Particle Erosion in a Cavity with Different Wall Heights

Insights into the relationship between particulate flow characteristics and local erosion behaviour under waterjet: The role of particle-fluid-surface interaction

The effect of finite container size on granular jet formation

Effects of Cohesion on the Flow Patterns of Granular Materials in Spouted Beds.

Fluid dynamic mechanisms of particle flow causing ductile and brittle erosion