Abstract:Introduction: The Loess Plateau has long been plagued by cascading loess landslides. The rapid identification of these landslides, along with the accurate determination of their failure modes, is essential for conducting precise disaster assessments in the region. Such assessments are critical for minimizing both human casualties and economic losses. However, the lack of reliable reference data for the early identification of landslide failure modes has resulted in limited detection accuracy, complicating the differentiation between various failure modes. Therefore, investigating the deformation and failure characteristics of loess landslides under different failure modes is crucial for providing a scientific foundation for early hazard detection and the accurate assessment of risk profiles. Methods: This work examines the pre-slip deformation and post-slip damage characteristics of the rotational-sliding Huzhu Landslide and the translational-sliding Zhongzhai Landslide through a combination of field investigations, unmanned aerial vehicle surveys, and remote sensing interpretation. Physical model tests were conducted to simulate the instability and failure processes of both rotational and translational loess landslides. Meanwhile, three-dimensional models and orthophoto graphic images at various stages of the landslides were generated using Contexcapture. Results: The initial stages of rotational sliding landslides are marked by the formation of distinct tensile cracks at the trailing edge of the slope and minor uplift at the front. As the uplift at the front progresses and numerous extension fissures develop, the stability of the landslide reduces progressively. Upon reaching instability, the sliding velocity of the sliding mass initially accelerates before decelerating, with majority of the mass remaining on the sliding surface and retaining relatively well structural integrity. At the trailing edge of the landslide, characteristic features such as falling scarps, fractured walls, and sunken grooves can be observed, while the front displays significant bulging phenomena. In contrast, translational sliding landslides are initially characterized by minor tensile cracks at the trailing edge and pronounced deformation at the front. As these tensile cracks propagate, the landslide are prone to sudden instability under external triggering factors. Following the onset of instability, the sliding mass undergoes rapid movement, with only a small part of the mass remaining on the sliding surface. Discussion: Landslides triggered by different factors and occurring under varying water content conditions may exhibit significant differences in their pre-failure behavior and post-failure characteristics. Thus, it is imperative to conduct further research in this field to better understand these complex dynamics.

Time‐dependent analysis and stability evaluation of plane rotary landslides: Insights from a case study

Deep-Seated Slope Failures Induced by Inappropriate Cutting in China

Stability Analysis of Rock Wedge Slide Subjected to Groundwater Dynamic Evolution

Analysis of Deformation Mechanism of Landslide in Complex Geological Conditions

Development of a Probabilistic Kinematic Wedge Sliding Analysis Procedure and Application to a Rock Slope at a Hydropower Site in China

Forensic analysis and numerical simulation of a catastrophic landslide of dissolved and fractured rock slope subject to underground mining

Mechanical interpretation of retrogressive failure in mild dip rock slopes induced by slope cutting and rainfall: a case study in Yunnan, China

Failure Mechanism and Stabilization of a Basalt Rock Slide with Weak Layers

Early identification on failure mode of loess landslide: insight from case study and physical model experiment

Investigation of planar sliding deformation and analysis of damage mechanism of rocky landslide in Yaoping triggered by highway excavation in Hubei, China

Topographic Changes, Surface Deformation and Movement Process before, during and after a Rotational Landslide

Failure Mechanism Analysis of Mining-Induced Landslide Based on Geophysical Investigation and Numerical Modelling Using Distinct Element Method

Slope instability mechanism with differential rock mass structure along a fault: a mine landslide from Southwest China

Characterization of the Kinematic Evolution of the Hongshiyan Landslide Using the Material Point Method

A Case Study Integrating Numerical Simulation and InSAR Monitoring to Analyze Bedding-Controlled Landslide in Nanfen Open-Pit Mine

Failure process and three-dimensional motions of mining-induced Jianshanying landslide in China observed by optical, LiDAR and SAR datasets

Effects of Weak Bedding Plane, Fault, and Extreme Rainfall on the Landslide Event of a High Cut-Slope

Geological Analysis and Model Test of Bedding Rock Cutting Landslide

A process-oriented approach for identifying potential landslides considering time-dependent behaviors beyond geomorphological features

Comprehensive investigation of a dangerous counter-tilt landslide in the upper reaches of Jinsha River, China

STABILITY ANALYSIS OF ANCIENT DEBRIS LANDSLIDE