Abstract:We present an approach on the electrodeposition of gold nanoparticles (AuNPs) on a carbon fiber microelectrode (CFME) followed by deposition of nickel(II) tetrasulfonated phthalocyanine (p-NiTSPc) film by electropolymerization to form CFME-AuNPs/p-NiTSPc, for the sensitive determination of butylhydroxyanisole (BHA) using cyclic voltammetry (CV) and differential pulse voltammetry (DPV). Atomic force microscopy (AFM), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDX) were used to characterize the topography, morphology, and elemental composition of CFME, CFME-AuNPs, CFME-p-NiTSPc, and CFME-AuNPs/p-NiTSPc, respectively. Additionally, the electrochemical impedance spectroscopy (EIS) technique was employed to evaluate the charge-transfer rate of the tested sensors. To establish the optimal conditions for the electroanalysis of BHA, various parameters were investigated, including the potential scan rate, pH, and electrolysis potential. CFME-AuNPs/p-NiTSPc demonstrated the highest BHA signal, corresponding to the highest active surface area of 0.025 cm 2 , compared to CFME-p-NiTSPc (0.024 cm 2 ), CFME-AuNPs (0.022 cm 2 ), and CFME (0.021 cm 2 ). In a phosphate buffer solution (PBS, 0.1 M; pH 3), a good linear relationship ( R 2 = 0.998) was observed between peak current intensities and BHA concentrations in the range of 10–80 μM, resulting to a detection limit (LOD) of 3.60 μM ( S / N = 3) and a quantification limit (LOQ) of 12 μM ( S / N = 10). The analytical HPLC technique was also tested for BHA determination within the concentration range of 5.55–55.48 μM and the obtained LOD was calculated to be 4.41 μM. The potential interference of certain species that could affect the BHA oxidation signal was also evaluated, followed by the application of CFME-AuNPs/p-NiTSPc in real water and Mitosyl ointment samples. The recovery values of BHA were acceptable, ranging from 96 to 99% and demonstrating that the developed sensor is highly sensitive and effective for detecting trace amounts of BHA.

Chitosan-Based Hydrogel Functionalized with Fe(II) Phthalocyanine for Butylated Hydroxyanisole Determination

Pyrene-1-carboxaldehyde Hydrazone Modified Mesoporous Silica Foam-Based Strategy for Efficient and Accurate Electroanalysis of Copper in Food Samples

Salicylaldehyde Functionalized Chitosan for Electrochemical Sensitive Sensor: Simultaneous Determination of Catechol and Hydroquinone

A Novel Electrochemical Sensor for Chlorophenols Based on the Enhancement Effect of Al-doped Mesoporous Cellular Foam

Chitosan-coated electrodes for bimodal sensing: selective post-electrode film reaction for spectroelectrochemical analysis.

Chitosan-coated Hemoglobin Microcapsules for Use in an Electrochemical Sensor and As a Carrier for Oxygen

A molecularly-imprinted electrochemical sensor based on a graphene-Prussian blue composite-modified glassy carbon electrode for the detection of butylated hydroxyanisole in foodstuffs.

Highly Sensitive Electrochemical Determination of Butylated Hydroxyanisole in Food Samples Using Electrochemical-Pretreated Three-Dimensional Graphene Electrode Modified with Silica Nanochannel Film

Ferrocene-Phenylalanine Hydrogels for Immobilization of Acetylcholinesterase and Detection of Chlorpyrifos

Silver Nanoparticle-Embedded Conductive Hydrogels for Electrochemical Sensing of Hydroquinone

Fluorescence nanoplatform based on conjugated polymer nanoparticles-transition metal hydroxide composite for the detection of Butyrylcholinease

Hydrogen peroxide biosensor based on chitosan/2D layered double hydroxide composite for the determination of H2O2

Preparation of CoFe@C composite modified electrode for neohesperidin dihydrochalcone sensing and its application in Chinese medicine

Amperometric determination of hydroquinone and catechol using a glassy carbon electrode modified with a porous carbon material doped with an iron species

Zirconium‐based metal–organic framework and functionalized carbon black composite for simultaneous electrochemical detection of tert‐butylhydroquinone and butylhydroxyanisole

Fluorescent dialdehyde-BODIPY chitosan hydrogel and its highly sensing ability to Cu2+ ion

Unlocking the electrochemical performance of glassy carbon electrodes by surface engineered, sustainable chitosan membranes

Electrochemical determination of butylhydroxyanisole (BHA) using a carbon fiber microelectrode modified by electrodeposition of gold nanoparticles and poly-NiTSPc film

An electrochemical sensor based on FeCo bimetallic single-atom nanozyme for sensitive detection of H 2 O 2

Electrochemical sensing of trichloroacetic acid based on silver nanoparticles doped chitosan hydrogel film prepared with controllable electrodeposition

Application of conducting micelles self-assembled from commercial poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) and chitosan for electrochemical biosensor