Abstract:Polymer dielectrics are the key component in film capacitors, which are one of the most fundamental elements in modern electronics and power systems [1–3]. Film capacitors are capable of storing energy when voltage is applied, in the form of electric charges separated by a dielectric material sandwiched by a pair of metal electrodes. Film capacitors possess the advantages of high breakdown strength, low power loss and processing flexibility compared with their counterparts in competition such as electrolytic capacitors and ceramic capacitors [4], meaning they can sustain high voltage, have great efficiency in electrical energy storage and can be manufactured in low-cost and efficient methods. Moreover, the unique self-clearing (sometimes referred to as self-healing) characteristic of polymer dielectrics ensures reliable operation of film capacitors [5], which is of paramount significance since capacitors storing a large amount of electrical energy can explode when catastrophic failure occurs. To be specific, the self-clearing is a process that when localized breakdown occurs at a spot of metallized film capacitors (i.e., a film capacitor using dielectric polymer films with metallic electrodes deposited on the surface [5], [6]), the energy released in the breakdown process can "clear" the breakdown-site, forming an open circuit. This process protects the capacitor from catastrophic failure (Figure 1) [7]. Serving as a device for charge storage and control, film capacitors are commonly used in many types of circuits such as snubbers, phase shifters, filters and AC/DC converters/inverters. In particular, film capacitors are capable of releasing the stored energy in an extremely short period of time to supply a high power density [8–10], which is desirable for the pulsed power application [1]. However, sizeable energy storage has not yet been achievable with film capacitors due to the limited v-lumetric energy density (usually measured in Joule per cubic centimeter at the material level). This shortcoming has caused a major issue in the electrical apparatus and electrified systems where capacitors constitute a large volume and weight fraction, i.e., a bulky, and sometimes even cumbersome size. For instance, in the 800 kV voltage source converter-based high voltage direct current transmission system, each converter tower has a volume of approximately 480 m<sup>3</sup>, where capacitors are ∼60% of the converter weight, and ∼50% of the volume.

Multilayer polymer nanocomposites based on interface engineering for high-performance capacitors

Review of Polymer‐Based Nanodielectric Exploration and Film Scale‐Up for Advanced Capacitors

Recent Advances on Multilayer Polymer Composites of High Energy Density and Low Dielectric Loss

Polymer Capacitor Films with Nanoscale Coatings for Dielectric Energy Storage: A Review

Multilayered Hierarchical Polymer Composites for High Energydensity Capacitors

Synergy of Micro-/Mesoscopic Interfaces in Multilayered Polymer Nanocomposites Induces Ultrahigh Energy Density for Capacitive Energy Storage

Polymer nanocomposites for high-energy-density capacitor dielectrics: Fundamentals and recent progress

Polymer Dielectrics and Their Nanocomposites for Capacitive Energy Storage Applications

Polymer-based materials for achieving high energy density film capacitors

Polymer nanocomposite dielectrics for capacitive energy storage

Nanostructured Ferroelectric-Polymer Composites for Capacitive Energy Storage

Challenges and Opportunities of Polymer Nanodielectrics for Capacitive Energy Storage

Ceramic‐Polymer Nanocomposites Design for Energy Storage Capacitor Applications

Recent Progress in Polymer Dielectric Energy Storage: From Film Fabrication and Modification to Capacitor Performance and Application

Few-layer Boron Nitride Nanosheets/poly (vinylidene Fluoride-Trifluoroethylene-chlorofluoroethylene) Dielectric Nanocomposite Functionalized with Grafting POSS Copolymer

Research Progress of High Energy Storage Dielectric Polymer Materials

Design and characterization of molecular, crystal and interfacial structures of PVDF-based dielectric nanocomposites for electric energy storage

Polymer dielectrics for capacitive energy storage: From theories, materials to industrial capacitors

High Energy Density in layered 2D Nanomaterial based Polymer Dielectric Films

High-energy-density polymer dielectrics via compositional and structural tailoring for electrical energy storage

Recent progress in polymer dielectrics containing boron nitride nanosheets for high energy density capacitors