Abstract:With recent rapid technological developments, the use of fossil fuels has drastically increased, posing environmental concerns such as global warming and air quality deterioration due to the presence of particulate matter such as fine dust. Renewable energies, such as solar energy and wind energy, have been considered as promising alternatives to reduce the use of fossil fuels. However, the energy generated by renewable energy sources varies significantly and is dispersed because of its strong dependence on environmental conditions. Therefore, energy storage systems (ESSs) should be installed for the stable use of renewable energy systems and stable delivery in response to consumer demand. Among the many batteries used in ESSs, lithium-ion batteries (LIBs) have been used widely as a power source because of their relatively high voltage (~4.7 V vs Li) and high energy density (650 W h kg−1). Long-term reliability is necessary to utilize LIBs in ESSs; however, many drawbacks associated with the long-term use of LIBs have been reported recently in ESSs employing LIBs. Although the performance of LIBs is gradually improving, safety issues such as fire and explosion remain a major issue and disturbed the development of LIBs. In this study, we manufactured Fire-extinguishing Microcapsule (FEMC) containing extinguishing substances for the safety of the battery. Encapsulation of the extinguishing material inside a stable polymer shell prevented the extinguishing material from reacting directly with the electrolyte in the battery. The direct reaction of the extinguishing material with the electrolyte negatively affects the battery performance and causes a short circuit in the battery. When thermal runaway occurs in the battery, the outer shell material melts and the internal fire extinguishing material is released, effectively preventing fire and explosion of the battery. The FEMC was encapsulated by using solvent evaporation technique. To confirm FEMC's extinguishing effects self-extinguishing time (SET) was measured, and we observed FEMC's physical properties such as encapsulation, size by using characterization techniques (FE-SEM, TEM, TGA, etc). As a result, the size of the FEMC was evenly distributed about 2 μm to 5 μm, and the surface was generally smooth. In addition, extinguishing material was largely located in the middle of the interior, and the core-shell structure in which stable polymer shell was wrapped around a very thin wall was confirmed. The fire extinguishing effect by FEMC was confirmed in the electrolyte, and as a result, the bare electrolyte without a fire extinguishing additive was extinguished in about 115 sec. On the other hand, when FEMC containing extinguishing material was conducted SET test, it was confirmed that the combustion time decreased by about 12 sec. Compared with bare electrolyte, the combustion time was reduced by about 84.4%. Through this, it was confirmed that the FEMC had an excellent effect in extinguishing the fire in the electrolyte.

Preparation of environment-friendly gel-protein foam and its fire suppression performance for lithium-ion batteries

A Safe Electrolyte Enriched with Flame-Retardant Solvents for High-Voltage LiCoO2||Graphite Pouch Cells

Experimental study on exploration of optimum extinguishing agent for 243 Ah lithium iron phosphate battery fires

Development of an environmentally friendly gel foam and assessment of its thermal stability and fire suppression properties in liquid pool fires

Preparation and characterization of fire-extinguishing efficiency of novel gel-protein foam for liquid pool fires

Experimental study on the synergistic effect of gas extinguishing agents and water mist on suppressing lithium-ion battery fires

Experimental study of thermal stability and spread characteristics of gel-protein foam for liquid tank fires

Inhibition effect and extinguishment mechanisms of YS1000 microemulsion for lithium iron phosphate battery fires

Enhancing Extinguishing Efficiency for Lithium-Ion Battery Fire: Investigating the Extinguishing Mechanism and Surface/interfacial Activity of F-500 Microcapsule Extinguishing Agent

A review of fire-extinguishing agent on suppressing lithium-ion batteries fire

Preparation of New Eco-Friendly Gel Foam Based on Biomass Pectin Material for Fire Prevention of Coal

Eco-friendly extinguishing three-phase-gel foam with novel particle-gel crosslinking enhancing stabilization and fire extinguishing

Efficiency of dodecafluoro-2-methylpentan-3-one microemulsion to inhibit thermal runaway in lithium-ion batteries

Comparative study on fire suppression of NCA18650 lithium-ion battery by several fire extinguishing agents

The extinguishment mechanisms of a micelle encapsulator F-500 on lithium-ion battery fires

Preparation of novel gel foam and its fire suppression performance against gasoline pool fires

Experimental Study on the Efficiency of Hydrogel on Suppressing Thermal Runaway Propagation of Lithium-Ion Battery

Environmentally friendly fluorine-free fire extinguishing agent based on the synergistic effect of silicone, hydrocarbon surfactants and foam stabilizers

Fire-Extinguishing Microcapsule Composite Separator for Chemical Safety Management in Lithium-Ion Battery System

Preparation of a novel environmental-friendly lithium-ion battery fire suppression microcapsule and its fire extinguishing mechanism in coordination with ABC dry powder

The Efficiency of Perfluorohexanone on Suppressing Lithium-Ion Battery Fire and Its Device Development