Abstract:To explore the mechanical properties and fracture modes of basalt fiber-reinforced concrete, single-doped and hybrid-doped basalt fiber-reinforced concrete was prepared, and uniaxial failure tests under different basalt fiber-reinforced concrete contents were carried out. At the same time, the smooth kernel function in the traditional SPH method was improved, and the basalt fiber random generation algorithm was embedded in the SPH program to realize the simulation of the progressive failure of basalt fiber-reinforced concrete. The results show that under the circumstance with no basalt fiber, the specimen final failure mode is damage on the upper and lower surface, as well as the side edge, while the interior of the specimen center is basically intact, indicating that there is an obvious stress concentration phenomenon on the upper and lower surface when the specimen is compressed. Under the circumstance with basalt fiber, longitudinal cracks begin to appear inside the specimen. With the increase in the content, the crack location gradually develops from the edge to the middle, and the crack number gradually increases. This indicates that appropriately increasing the fiber content in concrete may improve the stress state of concrete, change the eccentric compression to axial compression, and indirectly increase the compressive strength of concrete. The numerical simulation results are consistent with the test results, verifying the rationality of the numerical simulation algorithm. For the concrete model without the basalt fiber, shear cracks are generated around the model. For the concrete model with basalt fiber, in addition to shear cracks, the tensile cracks generated at the basalt fiber inside the model eventually lead to the splitting failure of the model. The strength of concrete samples with basalt content of 0.1%, 0.2%, and 0.3% is increased by 1.69%, 5.10%, and 4.31%, respectively, compared to the concrete sample without basalt fiber. It can be seen that with the increase in the content of single-doped basalt fiber, the concrete strength is improved to a certain extent, but the improvement degree is not high; For hybrid-doped basalt fiber-reinforced concrete, the strength of concrete samples with basalt content of 0.1%, 0.2%, and 0.3% is increased by 14.51%, 15.02%, and 30.31%, respectively, compared to the concrete sample without basalt fiber. Therefore, compared with the single-doped basalt fiber process, hybrid doping is easier to improve the strength of concrete.

Study on the composition-property relationships of basalt fibers based on symbolic regression and physics-informed neural network

Mechanical Properties of SFRC: Database Construction and Model Prediction

A Thermodynamics-Informed Neural Network for Elastoplastic Constitutive Modeling of Granular Materials

Machine Learning and Materials Informatics Approaches for Predicting Transverse Mechanical Properties of Unidirectional CFRP Composites with Microvoids

Experimental Study on Basic Mechanical Properties of Basalt Fiber Reinforced Concrete

Prediction of tensile strength of basalt continuous fiber from chemical composition using machine learning models

Alkali Resistance Prediction and Degradation Mechanism of Basalt Fiber: Integrated with Artificial Neural Network Machine Learning Model

Experimental assessment of the efficiency of deep learning method in predicting the mechanical properties of polymer concretes and composites

A thermodynamically consistent physics-informed deep learning material model for short fiber/polymer nanocomposites

A deep learning convolutional neural network and multi-layer perceptron hybrid fusion model for predicting the mechanical properties of carbon fiber

Study on Mechanical Properties of Basalt Fibers Superior to E-glass Fibers

Investigating the Mechanical Characteristics and Fracture Morphologies of Basalt Fiber Concrete: Insights from Uniaxial Compression Tests and Meshless Numerical Simulations

Optimization Mechanism of Mechanical Properties of Basalt Fiber-Epoxy Resin Composites by Interfacially Enriched Distribution of Nano-Starch Crystals

Learning solution of nonlinear constitutive material models using physics-informed neural networks: COMM-PINN

Experimental study and mechanism analysis on basic mechanical properties of basalt fiber reinforced concrete

Coupling physics in machine learning to predict interlamellar spacing and mechanical properties of high carbon pearlitic steel

Identifying Constitutive Parameters for Complex Hyperelastic Materials using Physics-Informed Neural Networks

Study on the Property and Mechanism of Basalt Fibers Modified by the Sizing Containing Nano-Sio_2

Assessing Parameterized Geometric Models of Woven Composites using Image-Based Simulations

Research on basalt fiber reinforced phosphogypsum-based composites based on single factor test and RSM test