Mechanically Robust Janus Poly(lactic acid) Hybrid Fibrous Membranes toward Highly Efficient Switchable Separation of Surfactant-Stabilized Oil/Water Emulsions

Yi Qin,Hui Shen,Lu Han,Zongmin Zhu,Fei Pan,Shiwen Yang,Xianze Yin

DOI: https://doi.org/10.1021/acsami.0c15310

2020-10-30

Abstract:An ideal oil/water separation membrane should possess the characteristics of high flux and separation efficiency, recyclability, as well as good mechanical stability. Herein, a facile method is applied to fabricate a Janus polylactic acid (PLA) fibrous membrane for efficiently separating surfactant-stabilized oil/water mixtures. The Janus PLA fibrous membrane architecture was prepared by electrospinning a PLA/carbon nanotubes (CNTs) fibrous membrane and the subsequent electrospinning of a PLA/SiO₂ nanofluids (nfs) membrane onto one side of the PLA/CNTs fibrous membrane. Due to the strong electrostatic interaction between SiO₂ nfs and CNTs, synchronous enhancement and plasticization of PLA fibrous membranes were achieved, which was far superior to that reported in the literature. The introduction of CNTs had caused an upshift of the hydrophobicity of the PLA/CNTs fibrous membrane (water contact angle (WCA) &gt; 140°). In contrast, SiO₂ nfs bearing long-chain organic anions and cations located onto the surface of the fibers during electrospinning to achieve superhydrophilicity (WCA ≈ 0°). Benefiting from completely opposite wettability on both sides of the Janus membrane, the obtained asymmetric Janus membranes exhibited a high flux (1142–1485 L m^–2 L^–1) and excellent oil/water separation efficiency (&gt;99%), which were superior to those reported for other Janus membranes. Furthermore, the Janus membranes showed desirable flux recovery without any treatment (&gt;80% for water-in-oil emulsions and &gt;90% for oil-in-water emulsions, respectively, after 11 cycles), showcasing promising applications for water treatment in the future.. The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c15310?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c15310</a>.Preparation of SiO₂ nfs; FTIR spectrum, XRD curves, TGA curves, DSC curves, size distribution, optical pictures, separation performance, EDS spectrum, and AEM images of the Janus PLA fibrous membranes (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c15310/suppl_file/am0c15310_si_001.pdf">PDF</a>)Movies of the wettability behavior of Janus PLA hybrid membranes (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c15310/suppl_file/am0c15310_si_002.zip">ZIP</a>)This article has not yet been cited by other publications.

materials science, multidisciplinary,nanoscience & nanotechnology

What problem does this paper attempt to address?

The paper aims to address the issue of efficiently separating emulsified oil-water mixtures, particularly when dealing with surfactant-stabilized oil-water emulsions. Currently, industrial and domestic wastewater contains a large amount of oil substances, and effectively recovering and separating these oily wastewaters has become a global challenge. Traditional physical methods such as skimmers, flotation, and sedimentation face difficulties in practical applications when dealing with complex and stable oil-water emulsions, especially surfactant-stabilized oil-water emulsions, which have small dispersed phase particle sizes and high stability, making the separation process extremely difficult. Moreover, most separation materials focus mainly on single selective wettability, which cannot significantly improve separation efficiency.

Therefore, this study developed a Janus polylactic acid (PLA) hybrid fiber membrane with excellent separation performance. This membrane was prepared using electrospinning technology, enabling it to efficiently separate surfactant-stabilized oil-water emulsions. The membrane features high flux, high separation efficiency, good mechanical stability, and reusability, making it promising for widespread application in future water treatment fields.