Abstract:Background: In clinical practice, specific customization is needed to address foot pathology, which must be disease and patient-specific. To date, the traditional methods for manufacturing custom functional Foot Orthoses (FO) are based on plaster casting and manual manufacturing, hence orthotic therapy depends entirely on the skills and expertise of individual practitioners. This makes the procedures difficult to standardize and replicate, as well as expensive, time-consuming and material-wasting, as well as difficult to standardize and replicate. 3D printing offers new perspectives in the development of patient-specific orthoses, as it permits addressing all the limitations of currently available technologies, but has been so far scarcely explored for the podiatric field, so many aspects remain unmet, especially for what regards customization, which requires the definition of a protocol that entails all stages from patient scanning to manufacturing. Methods: A feasibility study was carried out involving interdisciplinary cooperation between industrial engineers and podiatrists. To that end: (i) For patient-specific data acquisition, 3D scanning of the foot is compared to traditional casting. (ii) a modelling GD workflow is first created to design a process permitting easy creations of customized shapes, enabling the end user (the podiatrist) to interactively customize the orthoses. Then, (iii) a comparison is made between different printing materials, in order to reproduce the same mechanical behavior shown by standard orthoses. To do this, the mechanical properties of standard materials (Polycarbonate sheets), cut and hand-shaped, are compared with four groups of 3D printed samples: poly(ethylene glycol) (PETG), poly(acrylonitrile-butadiene.styrene) (ABS), polycarbonate (PC) and poly(lactic acid) (PLA) obtained by Fused Filament Fabrication (FFF). Results: Differences found between the foot plaster model obtained with the plaster slipper cast in a neutral position and the model of the real foot obtained with 3D scanning in the same position can be ascribed to the non-stationarity of the patient during the acquisition process, and were limited by a locking system with which no substantial differences in the almost entire sole of the foot scan were observed. Conclusions: Using the designed GD workflow, podiatrists with limited CAD skills can easily design and interactively customize foot orthoses to adapt them to the patients' clinical needs. 3D printing enables the complex shape of the orthoses to be reproduced easily and quickly. Compared to Polycarbonate sheets (gold standard), all the printed materials were less deformable and reached lower yield stress for comparable deformation. No modifications in any of the materials as a result of printing process were observed.

3D printed splint designed by 3D surface scanner for patients with hand allodynia

Developing 3D-Printed Wrist Splints for Distal Radius and Scaphoid Fractures

Patient-specific 3D-Printed Splint for Mallet Finger Injury

In-house 3D-printed custom splints for non-operative treatment of distal radial fractures: a randomized controlled trial

Design of an Orthopedic Product by Using Additive Manufacturing Technology: The Arm Splint

Evaluating the clinical benefit and acceptance of a bespoke 3D-printed splint for the treatment of mallet finger injury: A pilot study in a cohort of patients

The design and manufacturing of a Patient-Specific wrist splint for rehabilitation of rheumatoid arthritis

Multidisciplinary topology and material optimization approach for developing patient-specific limb orthosis using 3D printing

Foot Orthosis and Sensorized House Slipper by 3D Printing

A Review on 3D Scanners Studies for Producing Customized Orthoses

3D MODEL of an anatomically inert human hand: feasibility study

An Integrative Computational Design Workflow and Validation Methodology for 3D-Printed Personalized Orthopedic Devices: Case Study of a Wrist–Hand Orthosis (WHO)

Automated 3D-printed finger orthosis versus manual orthosis preparation by occupational therapy students: Preparation time, product weight, and user satisfaction

Design of Personalized Cervical Fixation Orthosis Based on 3D Printing Technology

3D printing orthopedic scoliosis braces: a test comparing FDM with thermoforming

Development and validation of a 3D-printed interfacial stress sensor for prosthetic applications

Design and development of customized elbow orthosis using additive manufacturing

Development of 3D-printed myoelectric hand orthosis for patients with spinal cord injury

Therapy for Temporomandibular Disorders: 3D-Printed Splints from Planning to Evaluation

3D printing technology in the management of carpal tunnel syndrome: A case report

Assessment of the Mechanical Properties and Fragment Characteristics of a 3D-Printed Forearm Orthosis