Frequency Assessment of Sandwich Rectangular Plates with an Anisogrid Core and GPLRC Face Sheets

S. Ghatreh Samani,H. Beheshti,A. H. Akbarzadeh,Y. Kiani

DOI: https://doi.org/10.1142/s0219455425501755

IF: 2.9568

2024-07-19

International Journal of Structural Stability and Dynamics

Abstract:International Journal of Structural Stability and Dynamics, Ahead of Print. In this paper, the free vibration of a sandwich plate with an anisogrid core and two face sheets reinforced with graphene platelets (GPLs) is investigated. A continuous approach is considered for the lattice core and the equivalent properties are calculated. Adopting the Halpin–Tsai micromechanics, the effective Young's modulus of the nanocomposites/graphene platelets is extracted. Also, mass density and Poisson's ratio are earned with the simple rule of mixtures. A quasi-3D theory is applied to model the kinematics of the sandwich plate with simply supported boundary conditions. Hamilton's principle is implemented to obtain the equations of motion that are solved based on the Navier solution. The validity of the results of this study is confirmed by comparing the analytical results with those presented in other researches and also a finite element model. The effect of the parameters of the lattice core such as the width of ribs, the number of helical ribs in one direction, and the ratio of thickness of face sheets to core on the natural frequencies of the sandwich plate was investigated. Additionally, the impact of the pattern of graphene platelets and their weight fraction on the natural frequencies were investigated. The results show that by decreasing the ratio of the thickness of face sheets to the thickness of core and increasing the number of ribs and their width, the natural frequencies will decrease. Moreover, the patterns FG-V and FG-A have the highest and the lowest natural frequencies, respectively, among the other distribution of graphene platelets.

engineering, mechanical,mechanics, civil