Abstract:The liquid–solid triboelectric nanogenerator (LS-TENG) has been demonstrated to harvest energy efficiently through the contact electrification effect between liquid and solid triboelectric materials, which can avoid the wear issue in solid–solid TENG. However, the droplet-based LS-TENG reveals the problems that it generally works with the continuous falling droplets or needs to be fully packaged, which greatly limit its practical application. Here, a droplet-based triboelectric nanogenerator (DB-TENG) with a simple open structure is designed to effectively solve these problems. The nonpackaged DB-TENG can work stably under extreme conditions with high humidity or high concentrations of salt, acid, or alkali solutions, showing the DB-TENGs can be flexibly utilized in all types of working environments with better reliability and lower maintenance costs. It is of great significance that the integrated DB-TENG network array can realize the all-weather ocean energy harvesting. Furthermore, under the simulated ocean wave, a scaled-up DB-TENG with considerable output performance can charge capacitors and drive electrical devices. Overall, the DB-TENG shows many advantages: simple open structure, all-weather working ability, timely supplement of water loss, no tight packaging, wear resistance, suitable for extreme working environments. This work provides a convenient and feasible way toward all-weather wave energy harvesting in real marine environments.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsnano.1c02790.Movie S1: The simulated potential distribution of droplet sliding process using the finite-element method via the commercial software COMSOL (MP4)Movie S2: LEDs are lit simultaneously using DI water droplets with integrated array with 24 DB-TENGs (MP4)Movie S3: Thirty-five LED light bulbs are lighted by vessel with a scaled-up DB-TENG module in water wave (MP4)Figures S1–S14 provide the output electrical performance of grounding and no grounding for a droplet on the FEP film; the simulated potential distribution of the ungrounded connection at four different locations; schematic diagram of two wiring modes; the structure diagram of the whole test device and shaking process; comparison of electrical characterization between steel ball and droplet after contact with FEP films; the relationship between output performance and droplet volume; output performance of the droplet-based TENG at different angular accelerations; the droplet status at different angular accelerations; comparison of the charge density reported in recent years with this work; surface contact angles of different films; the variation of current, voltage and power with external circuit resistance; circuit diagram of the self-powered system; output performance of a single DB-TENG with three different droplets; photograph of the scaled-up DB-TENG on a test ship. Notes S1–S3 provide an explanation of the simulated potential distribution diagram of the ungrounded connection; a brief discussion of the electrical characterization of droplets contact with FEP surface; calculation of the contact area and the surface charge density (PDF)This article has not yet been cited by other publications.

Dripping Channel Based Liquid Triboelectric Nanogenerators for Energy Harvesting and Sensing

Droplet-enabled controllable manipulation of tribo-charges from liquid-solid interface

A New Single‐Electrode Generator for Water Droplet Energy Harvesting with A 3 Ma Current Output

High-output Solidliquid Triboelectric Nanogenerator Enhanced by the Regulation of Interfacial Wettability

High-output Solid-Liquid Triboelectric Nanogenerator Enhanced by the Regulation of Interfacial Wettability

Superhydrophobic Liquid–Solid Contact Triboelectric Nanogenerator as a Droplet Sensor for Biomedical Applications

Electron Transfer as a Liquid Droplet Contacting a Polymer Surface

A Dual-Mode Triboelectric Nanogenerator for Efficiently Harvesting Droplet Energy

Triboelectric Nanogenerator for Droplet Energy Harvesting Based on Hydrophobic Composites

Liquid–Liquid Triboelectric Nanogenerator for Harvesting Distributed Energy

Robust Working Mechanism of Water Droplet‐Driven Triboelectric Nanogenerator: Triboelectric Output versus Dynamic Motion of Water Droplet

Liquid-FEP-based U-tube triboelectric nanogenerator for harvesting water-wave energy

SLIPS-TENG: robust triboelectric nanogenerator with optical and charge transparency using a slippery interface

Noncontact liquid–solid nanogenerators as self-powered droplet sensors

Liquid-solid triboelectric nanogenerators for a wide operation window based on slippery lubricant-infused surfaces (SLIPS)

Triboelectric Nanogenerator as a Probe for Measuring the Charge Transfer between Liquid and Solid Surfaces

All-Weather Droplet-Based Triboelectric Nanogenerator for Wave Energy Harvesting

Effect of Photo-Excitation on Contact Electrification at Liquid–Solid Interface

High-Electrification Performance and Mechanism of a Water–Solid Mode Triboelectric Nanogenerator

Liquid-based Nanogenerator Fabricated by a Self-Assembled Fluoroalkyl Monolayer with High Charge Density for Energy Harvesting

New cambered-surface based drip generator: A drop of water generates 50 μA current without pre-charging