Abstract:Lithium ion capacitors (LICs) are a new generation of energy storage devices that combine the super energy storage capability of lithium ion batteries with the satisfactory power density of supercapacitors. The development of high-performance LICs still faces great challenges due to the unbalanced reaction kinetics at the anode and cathode. Therefore, it is an inevitable need to enhance the electron/ion transfer capability of the anode materials. In this paper, to obtain a superior-rate and high-capacity Ni3S2-based anode, highly conductive Ti3C2Tx MXene sheets were introduced to sever as the carrier of Ni3S2 nanoparticles and simultaneously an amorphous carbon layer which coats onto the surface of Ni3S2 nanoparticles was in-situ generated by the carbonization of dopamine reactant. The as-synthesized Ni3S2/Ti3C2Tx/C composite exhibits a high specific surface area (112.6 m2/g) because of the addition of Ti3C2Tx that can reduce the aggregation of Ni3S2 nanoparticles and the in-situ generated amorphous carbon layer that can suppress the growth of Ni3S2 nanoparticles. The Ni3S2/Ti3C2Tx/C anode possesses a remarkable reversible discharge specific capacity (626.0 mAh/g under 0.2 A/g current density), which increases to 1150.8 mAh/g after 400-cycle charge/discharge measurement at the same measurement condition indicating eminent cyclability, along with superior rate capability. To construct a superior-performance LIC device, a sterculiae lychnophorae derived porous carbon (SLPC) cathode with an average discharge specific capacity of 73.4 mAh/g@0.1A/g was prepared. The Ni3S2/Ti3C2Tx/C//SLPC LIC device with optimal cathode/anode mass ratio has a satisfactory energy density ranging from 32.8 to 119.1 Wh kg-1 at the corresponding power density of 8799.4 to 157.5 W kg-1, together with a prominent capacity retention (95.5 %@1 A/g after 10,000 cycles).

Nitrogen-doped activated porous carbon for 4.5 V lithium-ion capacitor with high energy and power density

Robust and Fast Lithium Storage Enabled by Polypyrrole-Coated Nitrogen and Phosphorus Co-Doped Hollow Carbon Nanospheres for Lithium-Ion Capacitors

Phosphorus and Nitrogen Codoped Carbon Nanoparticles as Both Anode and Cathode Materials with Enhanced Li + /PF 6 – Storage for High Energy Density Lithium-Ion Capacitors

In-Situ High Level Nitrogen Doping into Carbon Nanospheres Boosting Capacitive Charge Storage as Both Anode and Cathode for A High-Energy 4.5 V Full Carbon Lithium Ion Capacitor.

High-Performance Lithium-Ion Capacitors Produced by Atom-Thick Carbon Cathode and Nitrogen-Doped Porous Carbon Anode

Co3O4 porous nanorod/N-doped reduced graphene oxide composite with fast pseudocapacitive lithium storage for high-performance lithium-ion capacitors

Na0.76V6O15/Activated Carbon Hybrid Cathode for High-Performance Lithium-Ion Capacitors

High-performance Li-ion Capacitor Based on Black-Tio 2-X /graphene Aerogel Anode and Biomass-Derived Microporous Carbon Cathode

Phytic acid mediated N, P co-doped hierarchical porous carbon with boosting capacitive storage for dual carbon lithium-ion capacitor

Balancing the anions adsorption and intercalation in carbon cathode enables high energy density dual-carbon lithium-ion capacitors

Na<sub>0.76</sub>V<sub>6</sub>O<sub>15</sub>/Activated Carbon Hybrid Cathode for High-Performance Lithium-Ion Capacitors

A Superior Lithium-Ion Capacitor Based on Ultrafine MnO/Dual N-Doped Carbon Anode and Porous Carbon Cathode

3D carbon nanotube-mesoporous carbon sponge with short pore channels for high-power lithium-ion capacitor cathodes

Layered carbon-based pseudocapacitive materials for lithium/sodium-ion capacitor with high energy-power densities and long cycle life

A High-Rate and Ultrastable Anode Enabled by Boron-Doped Nanoporous Carbon Spheres for High-Power and Long Life Lithium Ion Capacitors

High-Energy and High-Power Nonaqueous Lithium-Ion Capacitors Based on Polypyrrole/Carbon Nanotube Composites As Pseudocapacitive Cathodes

Ultrahigh-rate and High-Density Lithium-Ion Capacitors Through Hybriding Nitrogen-Enriched Hierarchical Porous Carbon Cathode with Prelithiated Microcrystalline Graphite Anode

Zn/Co Bimetallic Metal-Organic Framework Derived Carbon Anode with Enchanted Rate Capability for Lithium-Ion Capacitors

Electrospun N-Doped Hierarchical Porous Carbon Nanofiber with Improved Degree of Graphitization for High-Performance Lithium Ion Capacitor.

Rational design of N-doped carbon coated NiNb2O6 hollow nanoparticles as anode for Li-ion capacitor

Carbon-reinforced Ni3S2/Ti3C2Tx MXene composite as an anode for superior-performance lithium-ion capacitors