Abstract:Abstract The anthropogenic entry of organic micropollutants into the aquatic environment leads to a potential risk for drinking water resources and the drinking water itself. Therefore, sensitive screening analysis methods are needed to monitor the raw and drinking water quality continuously. Non-target screening analysis has been shown to allow for a more comprehensive investigation of drinking water processes compared to target analysis alone. However, non-target screening is challenging due to the many features that can be detected. Thus, data processing techniques to reduce the high number of features are necessary, and prioritization techniques are important to find the features of interest for identification, as identification of unknown substances is challenging as well. In this study, a drinking water production process, where drinking water is supplied by a water reservoir, was investigated. Since the water reservoir provides surface water, which is anthropogenically influenced by wastewater treatment plant (WWTP) effluents, substances originating from WWTP effluents and reaching the drinking water were investigated, because this indicates that they cannot be removed by the drinking water production process. For this purpose, ultra-performance liquid chromatography coupled with an ion-mobility high-resolution mass spectrometer (UPLC-IM-HRMS) was used in a combined approach including target, suspect and non-target screening analysis to identify known and unknown substances. Additionally, the role of ion-mobility-derived collision cross sections (CCS) in identification is discussed. To that end, six samples (two WWTP effluent samples, a surface water sample that received the effluents, a raw water sample from a downstream water reservoir, a process sample and the drinking water) were analyzed. Positive findings for a total of 60 substances in at least one sample were obtained through quantitative screening. Sixty-five percent (15 out of 23) of the identified substances in the drinking water sample were pharmaceuticals and transformation products of pharmaceuticals. Using suspect screening, further 33 substances were tentatively identified in one or more samples, where for 19 of these substances, CCS values could be compared with CCS values from the literature, which supported the tentative identification. Eight substances were identified by reference standards. In the non-target screening, a total of ten features detected in all six samples were prioritized, whereby metoprolol acid/atenolol acid (a transformation product of the two β-blockers metoprolol and atenolol) and 1,3-benzothiazol-2-sulfonic acid (a transformation product of the vulcanization accelerator 2-mercaptobenzothiazole) were identified with reference standards. Overall, this study demonstrates the added value of a comprehensive water monitoring approach based on UPLC-IM-HRMS analysis. Graphical abstract

Combining in vitro reporter gene bioassays with chemical analysis to assess changes in the water quality along the Ammer River, Southwestern Germany

Future water quality monitoring: improving the balance between exposure and toxicity assessments of real-world pollutant mixtures

Assessing the impact of two conventional wastewater treatment plants on small streams with effect-based methods

Benchmarking Organic Micropollutants in Wastewater, Recycled Water and Drinking Water with in Vitro Bioassays

Application of biological early warning systems in wastewater treatment plants: Introducing a promising approach to monitor changing wastewater composition

Modeling the Dynamics of Mixture Toxicity and Effects of Organic Micropollutants in a Small River under Unsteady Flow Conditions

Assessment of wastewater and recycled water quality: a comparison of lines of evidence from in vitro, in vivo and chemical analyses

Developing an Approach for Integrating Chemical Analysis and Transcriptional Changes to Assess Contaminants in Water, Sediment, and Fish

Quantitative Determination and Environmental Risk Assessment of 102 Chemicals of Emerging Concern in Wastewater-Impacted Rivers Using Rapid Direct-Injection Liquid Chromatography—Tandem Mass Spectrometry

Future Water Quality Monitoring--adapting Tools to Deal with Mixtures of Pollutants in Water Resource Management.

Assessment Of Typical Pollutants In Waterborne By Combining Active Biomonitoring And Integrated Biomarkers Response

AI-aided chronic mixture risk assessment along a small European river reveals multiple sites at risk and pharmaceuticals being the main risk drivers

Target, suspect and non-target screening analysis from wastewater treatment plant effluents to drinking water using collision cross section values as additional identification criterion

Microbial Reporter Gene Assay As a Diagnostic and Early Warning Tool for the Detection and Characterization of Toxic Pollution in Surface Waters.

Screening and prioritization of organic chemicals in a large river basin by suspect and non-target analysis

A Combined Hydraulic and Toxicological Approach to Assess Re-Suspended Sediments During Simulated Flood Events. Part I–multiple Biomarkers in Rainbow Trout

Integration of target analyses, non-target screening and effect-based monitoring to assess OMP related water quality changes in drinking water treatment

How effective are water treatment processes in removing toxic effects of micropollutants? A literature review of effect-based monitoring data

Screening of Pesticide and Biocide Patterns As Risk Drivers in Sediments of Major European River Mouths: Ubiquitous or River Basin-Specific Contamination?

Use of micropollutant indicator ratios to characterize wastewater treatment plant efficiency and to identify wastewater impact on groundwater

In vitro bioassays for monitoring drinking water quality of tap water, domestic filtration and bottled water