Abstract:CONSPECTUS: To tackle the foreseen energy crisis and serious environmental problem caused by conventional energy resources, solar cells, or photovoltaics (PV), a technology that can directly convert sunlight to electricity has been considered to be one of the most important and cost-effective clean energy techniques that benefit the environment. So far, silicon-based PVs have dominated the market due to mature fabrication techniques and their relatively good power conversion efficiency (PCE) and excellent stability. In the past decades, metal halide perovskite PVs have been a major direction of current PV research owing to their intriguing optoelectronic performance. The record PCE of perovskite PV cells has unprecedently increased from an original 3.8 to 25.5%. The typical structure of a photovoltaic perovskite is ABX(3), where A refers to a monovalent cation such as methylammonium (MA(+)), cesium (Cs+), or formamidinium (FA(+)); B refers to a divalent cation such as Pb2+ or Sn2+; and X refers to a halide anion. In general, a perovskite PV device consists of an active layer of the perovskite absorber, which is connected by a hole-transporting layer (HTL) and an electron-transporting layer (ETL). In the beginning, the strategies to improve the PCEs mainly focused on developing an effective method to grow a smooth and continuous polycrystalline film. After the improvement of the baseline PCE of the perovskite PVs, various techniques were employed to reduce the defects of perovskite formed at grain boundaries and surfaces, further pushing the PCEs of perovskite PV devices to over 20%. In the meantime, the discovery of suitable and low-cost interfacial materials such as electron-transporting materials and hole-transporting materials has appealed to the attention of the perovskite research community to accelerate the commercialization of the perovskite PVs. In this Account, we start from our efforts to develop facile and effective fabrication strategies to obtain smooth and continuous polycrystalline perovskite thin films, including vapor-assisted and moisture-assisted perovskite crystal growth. The strategies and the in-depth mechanisms of preventing the formation of specific detrimental defects accumulated at grain boundaries or the surface are also portrayed by designing various passivation molecules with certain functional groups, such as carbonyl groups, amine groups, or sulfonic groups. Some systematically designed electron- or hole-transporting materials to improve the charge extraction and collection efficiency in perovskite PV devices are discussed as well. Finally, future perspectives for further enhancing the long-term stability and PCE are proposed to accelerate the commercialization of perovskite PV devices in the next decade.

2D Perovskites: Unraveling the Crystallization Kinetics of 2D Perovskites with Sandwich‐Type Structure for High‐Performance Photovoltaics (Adv. Mater. 36/2020)

Enhanced Crystallization and Optimized Morphology of Perovskite through Doping Indium-Based Metal-Organic Assembly: Achieving Significant Solar Cell Efficiency Enhancements

Manipulating the Crystallization Kinetics by Additive Engineering toward High‐Efficient Photovoltaic Performance

Unveiling Crystal Orientation in Quasi‐2D Perovskite Films by In Situ GIWAXS for High‐Performance Photovoltaics

Exploration of Crystallization Kinetics in Quasi Two-Dimensional Perovskite and High Performance Solar Cells.

Crystalline Liquid-like Behavior: Surface-Induced Secondary Grain Growth of Photovoltaic Perovskite Thin Film

Adrenaline and hypertension: new evidence for a guilty verdict?

Tailored Key Parameters of Perovskite for High-Performance Photovoltaics

2D Halide Perovskite Phase Formation Dynamics and Their Regulation by Co‐Additives for Efficient Solar Cells

Perovskite Crystallization Regulation via Antimonene Quantum Sheets for Highly Efficient and Stable Solar Cells

De-templated crystallization in 2D perovskites for enhanced photovoltaic efficiency

Various Mechanisms of Additives in Different Additive Methods on the Crystallinity of Perovskite by Synchrotron Radiation Technology

Manipulating the Mixed‐Perovskite Crystallization Pathway Unveiled by In Situ GIWAXS

Molecular Engineering for Two-Dimensional Perovskites with Photovoltaic Efficiency Exceeding 18%

Sulfonium Cations Assisted Intermediate Engineering for Quasi‐2D Perovskite Solar Cells

In Situ Dynamic Observations of Perovskite Crystallisation and Microstructure Evolution Intermediated from [pbi6]4− Cage Nanoparticles

In Situ Probing the Crystallization Kinetics in Gas‐Quenching‐Assisted Coating of Perovskite Films

Additive-Induced Film Morphology Evolution for Inverted Dion–Jacobson Quasi-Two-Dimensional Perovskite Solar Cells with Enhanced Performance

Two-Second-Annealed 2D/3D Perovskite Films with Graded Energy Funnels and Toughened Heterointerfaces for Efficient and Durable Solar Cells.

Manipulating Crystallization Kinetics of Conjugated Polymers in Nonfullerene Photovoltaic Blends toward Refined Morphologies and Higher Performances

Manipulating the Crystallization of Perovskite via Metal‐Free DABCO‐NH4Cl3 Addition for High Efficiency Solar Cells