Abstract:Untreated wastewater pollution causes environmental degradation, health issues, and ecosystem disruption. Geopolymers offer sustainable, eco-friendly alternatives to traditional cement-based materials for wastewater solidification and removal. In this study, we investigate how wastewater containing organic and inorganic pollutants can be removed using geopolymer mixes based on metakaolin incorporation with cement kiln dust as an eco-friendly material. The present investigation compares the efficacy of two different techniques (solidification and adsorption) for reducing dye contaminants and heavy metals from wastewater using a geopolymer based on metakaolin incorporation with cement kiln dust. This study investigated the adsorption capacity of a geopolymer based on metakaolin incorporating two different ratios (20% and 40% by weight) of cement kiln dust (MC1 and MC2) for the reactive black 5 dyeing bath effluent (RBD) only and in a combination of 1200 mg/L of Pb2+ and Cd2+, each separately, in aqueous solutions under different adsorption parameters. The results of the adsorption technique for the two prepared geopolymer mixes, MC1 and MC2, show that MC1 has a higher adsorption activity than MC2 toward the reactive black 5 dyeing bath effluent both alone and in combination with Pb2+ and Cd2+ ions separately. The study also looked at using MC1 mix to stabilize and solidify both the dyeing bath effluent alone and its combination with 1200 mg/L of each heavy metal individually inside the geopolymer matrix for different time intervals up to 60 days of water curing at room temperature. The geopolymer matrix formed during the process was analyzed using FTIR, SEM, and XRD techniques to examine the phases of hydration products formed. The results showed that MC1 effectively adsorbs, stabilizes, and solidifies the dying bath effluent for up to 60 days, even with high heavy metal concentrations. On the other hand, geopolymer mixes showed an increase in mechanical properties when hydration time was increased to 60 days. According to our findings, the type of geopolymer developed from metakaolin and 20 wt.% cement kiln dust has the potential to be employed in the treatment of wastewater because it has good adsorption and solidification activity for the reactive black 5 dye effluent alone and for a mixture of dye pollutants with both Pb2+ and Cd2+ ions separately. Our results have significant implications for wastewater treatment and environmental remediation efforts, as they offer a sustainable solution for managing hazardous waste materials.

Performance of metakaolin-based geopolymer molecular sieve microspheres on dynamic recovery of Cu (II)

Facile Fabrication of Metakaolin/slag-Based Zeolite Microspheres (m/szms) Geopolymer for the Efficient Remediation of Cs+ and Sr2+ from Aqueous Media

Rapid Removal of Methylene Blue and Nickel Ions and Adsorption/desorption Mechanism Based on Geopolymer Adsorbent

Synthesis and adsorption performance of fly ash/steel slag based geopolymer for removal of Cu (II) and methylene blue

Preparation of a Porous Geopolymer (SPG) to be Used as an Adsorbent for Cu2+ Removal

Synthesis of Porous Red Mud/Slag-Based Spherical Geopolymers for Efficient Methylene Blue and Ni2+ Removal from Water

Adsorption of dyestuff by nano copper oxide coated alkali metakaoline geopolymer in monolith and powder forms: Kinetics, isotherms and microstructural analysis

Behaviors and Mechanisms of Adsorption of MB and Cr(VI) by Geopolymer Microspheres under Single and Binary Systems

Green Synthesis of the Effectively Environmentally Safe Metakaolin-Based Geopolymer for the Removal of Hazardous Industrial Wastes Using Two Different Methods

Efficient Adsorption of Cd2+ from Aqueous Solution Using Metakaolin Geopolymers

Development of effective porous geopolymer adsorbent with high strength for copper(II) ion removal

Sustainable green conversion of coal gangue waste into cost-effective porous multimetallic silicate adsorbent enables superefficient removal of Cd(II) and dye

Green synthesis of ceramsite from industrial wastes and its application in selective adsorption: Performance and mechanism

Preparation and Conversion Mechanism of Different Geopolymer-Based Zeolite Microspheres and Their Adsorption Properties for Pb2+

Soaking experimental study on solidification/stabilization of Cu2+contaminated soils with carbide slag and metakaolin

Synthesis and adsorption performance of carboxyl-functionalized magnetic agarose gel microspheres for Cu(II) removal

Selective adsorption of Cu(II) on amino-modified alginate-based aerogel: As a catalyst for the degradation of organic contaminant

A Green and Low-Cost Hollow Gangue Microsphere/geopolymer Adsorbent for the Effective Removal of Heavy Metals from Wastewaters.

Quantifying gel properties of industrial waste-based geopolymers and their application in Pb2+ and Cu2+ removal

Preparation of a series of highly efficient porous adsorbent PGMA- N and its application in the co-removal of Cu(II) and sulfamethoxazole from water

Performance and Heavy Metal Leaching of Porous Geopolymer Based on Solid Wastes