Abstract:Sequential leaching and extraction of precious metals from high aluminum (Al) circulating fluidized bed (CFB) fly ash in China, which associated with lithium (Li) and gallium (Ga), is one of the most significant ways for value-added utilization. However, industrial application has been limited due to serious corrosion of equipment, significant energy consumption, and complex purification processes. To sufficiently leach valuable metals from CFB fly ash, a novel energy-efficient sulfuric acid (H 2 SO 4 ) leaching process using dilution heat was developed, and the effects of iron (Fe) amount in the raw materials on the extraction process of Al, Li, and Ga as well as the as-prepared Al-based products were studied to efficiently obtain the qualified aluminum sulfate (Al 2 (SO 4 ) 3 ) products. The leaching behavior of each target element was systematically investigated by the laboratory and pilot-scale experiments. The extraction efficiencies for Al, Li, and Ga were 95.2%, 94.2%, and 87.7%, respectively, when the acid leaching process was conducted at the temperature of 140°C for 2 h, with the H 2 SO 4 concentration of 40% and the solid-to-liquid ratio of 1/3, In the Pilot-scale experiment, the temperature of the reaction system can reach 120°C, 140°C, and 160°C by regulating the amount of H 2 SO 4 added to release different heat, and efficient leaching of the target elements was achieved by the energy-efficient sulfuric acid leaching process. To obtain qualified Al 2 (SO 4 ) 3 products from fly ash, carbothermal reduction magnetic separation, and acid leaching were used for Fe removal from raw fly ash, and the Fe content in the as-prepared Al 2 (SO 4 ) 3 products was only 0.45% and 0.29%, which reached the standards of Class II qualified products and Class II first-grade products, respectively. This paper might provide an energy-efficient process for efficient and high-value utilization of solid waste fly ash.

Aluminum extraction technologies from high aluminum fly ash

A review of the alumina recovery from coal fly ash, with a focus in China

Energy-efficient leaching process for preparation of aluminum sulfate and synergistic extraction of Li and Ga from circulating fluidized bed fly ash

Comprehensive Extraction of Silica and Alumina from Coal Fly Ash via Reduced and Oxidized Roasting-Low Temperature Alkaline Leaching and Bayer Digestion

Efficient separation and comprehensive extraction of aluminum, silicon, and iron from coal fly ash by a cascade extraction method

Activation Pretreatment and Leaching Process of High-Alumina Coal Fly Ash to Extract Lithium and Aluminum

Extraction and Value-Added Utilization of Alumina from Coal Fly Ash Via One-Step Hydrothermal Process Followed by Carbonation

Progress of utilization of fly ash with high concentration alumina

Extraction of aluminum values from fly ash

Separation of alumina from aluminum-rich coal fly ash using NaOH molten salt calcination and hydrochemical process

A Two-Stage Process of Alkali Fusion and Organic Acid Leaching for Recovery of Critical Elements from Coal Fly Ash

An efficient and environmental friendly strategy for alumina extraction and Fe–Si alloys production from coal fly ash by combining vacuum thermal reduction, alkali dissolving, and magnetic separation

High-End Reclamation of Coal Fly Ash Focusing on Elemental Extraction and Synthesis of Porous Materials

Rare earth element recovery and aluminum-rich residue production from high alumina fly ash by alkali pre-desilication enhance the mechanochemical extraction process

Fe-Si alloys production and alumina extraction from coal fly ash via the vacuum thermal reduction and alkaline leaching

A cleaner electrolysis process to recover alumina from synthetic sulfuric acid leachate of coal fly ash

High-efficiency extraction of aluminum and lithium from coal fly ash using a novel sodium pyrosulfate mechanochemical activation - Sodium persulfate pressure leaching technology

Extraction of Aluminum from Coal Fly Ash Using Pressurized Sulfuric Acid Leaching with Emphasis on Optimization and Mechanism

Extraction of Aluminum Hydroxide from Coal Fly Ash by Pre-Desilication and Calcination Methods