Abstract:The zeolitic imidazolate frameworks (ZIFs) have been extensively investigated in adsorption, separation and catalysis for their unique properties, e.g., high surface area, ordered pore structures, tailorable frameworks and high chemical and thermal stability. Zn2+ and Co2+ are mostly used metal cations in ZIFs synthesis, because they prefer to form tetrahedron structures with imidazolates and their derived organic ligands. However the conventional preparation methods, which are generally performed at solvothermal condition in the sealed vessel, are time consuming and inhomogeneous process at micro-scale. As a result, the products are always different from batch to batch, which limits the scale-up of ZIFs by conventional synthesis methods. Therefore, facile ways to avoid these problems occurred in ZIFs synthesis are still needed to develop. The microfluidic system is of great advantages such as high surface to volume ratio, high mass and heat transfer efficiency and continuous flow processing. The continuous droplet microfluidic system is effective in mixing for the dynamic micro-environment inside droplets, and it is also effective in reducing the clogging problems for the confined synthesis of nanoparticles inside the microdroplets. Hence the droplet microfluidic system has been widely applied in nanomaterials synthesis. In this work, we design and fabricate a dual "T" type droplet microreactor to overcome the disadvantages of batch synthesis. The PDMS microchip was fabricated by a scaffold template assisting thermal curing process. Various ZIFs, including monoclinic C2/c ZIF-7, ZIF-8 and Co doped ZIF-8, were first synthesized in this microfluidic system to demonstrate a universal applicable synthesis method. The concentration of starting material and reaction time were studied in the synthesis of all ZIFs in this work. The results indicated that the increasing of concentration and retention time led to the increasing particles size in all ZIFs, as well as the increasing of product yield. However, the space-time yield was dramatically decreased while the retention time increased from 1 to 5 min, while the yield was just slightly increased. It was because that the micro-synthesis process had been significantly intensified in 1 min for the high mixing and diffusion efficiency in the microfluidic system. Moreover, the mixture solvent of methanol and ammonia water strongly facilitated the formation of ZIFs as well. The high throughput microfluidic system showed an estimated space-time yield of monoclinic C2/c ZIF-7 (461 kg/(cm3 d)), ZIF-8 (267 kg/(cm3 d)) and Co-ZIF-8 (160 kg/(cm3 d)) in a single microreactor, respectively. It paves the way to massively produce ZIFs without scale-up effect. All the ZIFs obtained from microreactions had high crystallinity except ZIF-67. ZIF-7 synthesized in these conditions showed a typical monoclinic C2/c ZIF-7 phase respect to the existence of water in the mixture solvents, which drove the structure from porous phase into the dense phase of monoclinic C2/c ZIF-7. ZIF-8 and Co-ZIF-8 both exhibited sodalite structure respect to the tetra coordination properties of Zn2+ and Co2+. The small polyhedron ZIF-8 particles had grown into large cubic particles with reaction time increased to 5 min. The Co doping exhibited strong effect on the particles morphology. The Co-ZIF-8 prepared from low concentration reactants showed spherical octadecahedron morphology, where {110} surfaces were the main surface. On the contrary, the high concentrated reactants resulted in cubic octadecahedron, where the {100} were mainly occupied the surface. The reason could be that the pure Co was difficult to form ZIF-67 in this condition; therefore the Co changes the formation of ZIF-8. Accordingly, this work provides a facile approach to massively produce diverse ZIFs with controllable morphology in microfluidic system.

Continuous synthesis of ZIF-67 by a microchannel mixer: A recyclable approach

Microfluidics-facilitated spontaneous synthesis of ZIF-67 metal–organic framework

Green synthesis of ZIF-67 nanoparticles via microfluidics: Towards sustainable nanomaterial production

High-yield synthesis of zeolitic imidazolate frameworks from stoichiometric metal and ligand precursor aqueous solutions at room temperature

Synthesis of ZIF-7, ZIF-8, ZIF-67 and ZIF-L from recycled mother liquors

Synthesis of zeolitic imidazolate frameworks in droplet microfluidic system

Sustainable Fabrication of the Zeolitic Imidazolate Framework-67 Membrane via Supercritical Fluid Processing of the Co-Based Gel Layer

Distillation of Alcohol/water Solution in Hybrid Metal–organic Framework Hollow Fibers

A Convenient, Economical and Excellent-Yield Method for the Preparations of Zeolite Imidazolate Frameworks (zifs) and the Applications in Environmental Purification

A purely green approach to low-cost mass production of zeolitic imidazolate frameworks

Sustainable Synthesis of Zeolitic Imidazolate Frameworks at Room Temperature in Water with Exact Zn/Linker Stoichiometry

Facile Synthesis of Metal–Organic Framework ZIF-67 Via a Multi-Inlet Vortex Mixer Using Various Solvents: MeOH, EtOH, H2O, and Baijiu

Controlled synthesis of metal-organic frameworks via AC electrokinetic mixing-assisted microfluidics: A case study of ZIF-8

Microstructure Manipulation of MFI-type Zeolite Membranes on Hollow Fibers for Ethanol–water Separation

Coupling atomic layer deposition with supercritical fluid processing to provide a highly C3H6‐selective ZIF‐8 membrane

Moisture-Assisted Synthesis and Carbon Dioxide Capture Performance of ZIF-L in Methanol Solution

Quality-dependent performance of hydrophobic ZIF-67 upon high-pressure water intrusion-extrusion process

Fabrication of Polycrystalline Zeolitic Imidazolate Framework Membranes by a Vapor-Phase Seeding Method

A versatile microfluidic strategy using air-liquid segmented flow for continuous and efficient synthesis of metal-organic frameworks

Green synthesis of zirconium-based MOF-808 by utilizing sustainable synthesis approaches

Mechanochemical Synthesis of Mixed Metal, Mixed Linker GlassForming Metal–Organic Frameworks