Rapid measurement of trace periodate concentration with bromide ion–catalyzed periodate for oxidation colorization of DPD

Pengfei Zhu,Ruoxi Wu,Xin Liu,Zhuoyu Yang,Peng Xu,Baolin Hou

DOI: https://doi.org/10.1016/j.jwpe.2024.104825

IF: 7

2024-01-20

Journal of Water Process Engineering

Abstract:In the study, the Br − –DPD method for the determination of IO 4 − concentration was established. The method facilitated the DPD indicator reaction by adding Br − and DPD at pH 5.5 (50 mM phosphate buffer) to complete the measurement of the IO 4 − concentration. DPD + could be detected by UV–visible spectrophotometer at 510 nm and 551 nm. The experimental results showed a strong linear relationship between the absorbance of DPD + and the concentrations of IO 4 − . The slopes of the calibration standard curves for absorption wavelengths at 510 nm and 551 nm are 1.92 × 10 4 M −1 cm −1 (R 2 > 0.999) and 2.06 × 10 4 M −1 cm −1 (R 2 > 0.999). The stoichiometric coefficient of the Br − –DPD method for IO 4 − and DPD was 1:2, and pH in the range 3.0–7.0 had no significant different on the calibration curve of the Br − –DPD method. The absorbance in experimental water remained stable within 600 s. The Br − –DPD method accurately measured trace concentration of IO 4 − in ultrapure water at the range of 0.05 μM–10 μM. In addition, metal ions (Fe 3+ , Cu 2+ and Co 2+ ) and common anions (SO 4 2− , NO 3 − and Cl − ) showed little interference on the Br − –DPD method. The results suggested that the Br − –DPD method is a precise and versatile approach for measuring IO 4 − concentration.

engineering, chemical, environmental,water resources