Abstract:Microstructure evolution is highly correlated with the melt flow characterization in welding. In this study, a 3D heat flow model with consideration of magnetic field was constructed to describe the temperature field, the flow and keyhole behaviors in the molten pool during the laser-MIG hybrid welding. The role of magnetic flux density in the molten pool dynamics and microstructure evolution was explored. A moving hybrid heat source model including Gaussian surface heat source model and Gaussian rotary body heat source model as well as double ellipsoidal heat source model was carried out to elucidate the laser and MIG arc energy distribution. Decent agreement is realized between the measured weld geometry and predicted weld pool dimension. Numerical results indicate that an expanded molten pool is clearly observed under magnetic field. As the magnetic flux density increases, the downward flow velocity of the molten pool is enhanced. Moreover, visible difference of oscillation growth period for keyhole depth is produced and this leads to a variation in the time it takes for the molten pool to stabilize. Significant grain refinement appearing in both arc-affected zone at the weld upper part and laser-affected zone at the weld lower part is documented although the refinement degree varies at different zones. This is attributed to the formation of many initial nuclei or crystallites, originated from the enhanced flow of the molten pool with the assistance of magnetic field. This study provides a perspective in understanding the physical phenomena involved in magnetic field assisted laser-MIG hybrid welding and lays the foundation for weld microstructure optimization.

The research on weld pool morphology and passive film characteristic of high-nitrogen stainless laser-arc hybrid weld joint

Corrosion Behavior of High-Nitrogen Steel Hybrid Welded Joints Fabricated by Hybrid Laser-Arc Welding

The Investigation on the Dynamic Solidification Behavior of the Hybrid Molten Pool in Layered Bimetallic Laser Penetration Welding

The Defects and Microstructure in the Fusion Zone of Multipass Laser Welded Joints with Inconel 52m Filler Wire for Nuclear Power Plants

Effects of Interlaminar Microstructural Inhomogeneity on Mechanical Properties and Corrosion Resistance of Multi-Layer Fiber Laser Welded High Strength Low Alloy Steel

Influence of absorbed nitrogen on microstructure and corrosion resistance of 2205 duplex stainless steel joint processed by fiber laser welding

A Comparison of Laser-Metal Inert Gas Hybrid Welding and Metal Inert Gas Welding of High-Nitrogen Austenitic Stainless Steel

Microstructural Inhomogeneity in the Fusion Zone of Laser Welds

Microstructure and performance of hybrid laser-arc welded high-strength low alloy steel and austenitic stainless steel dissimilar joint

Fiber Laser Welding of Bimetallic Plates and Corrosion Property of the Joints

Fatigue inhomogeneity of thick 316L stainless steel joints fabricated by ultra-high power laser-MIG hybrid welding

Semiconductor properties of passive film and corrosion resistance of 2205 duplex stainless steel joint welded by laser hybrid welding

Effect of Shielding Gas on the Microstructure and Properties of Laser-MAG Hybrid Welded Joint for Nickel-Saving Stainless Steel

Molten Pool Behavior and Solidification Characterization in Steady Magnetic Field Assisted Laser-Mig Hybrid Welding of Aluminum Alloy

Simulation Study on Weld Formation in Full Penetration Laser + MIG Hybrid Welding of Copper Alloy

Microstructures and mechanical properties of powder-filled laser welding joints composed of high-nitrogen steel

Welding stability and fatigue performance of laser welded low alloy high strength steel with 20 mm thickness

Microstructure and Performance of Hybrid Laser-Arc Welded 40 Mm Thick 316 L Steel Plates

Inhomogeneity of microstructure and mechanical properties in the interlayer regions for narrow gap laser wire filling welding of 316L stainless steel

Role of Layer Arrangement in Microstructure and Corrosion Behavior for 78-Mm Thick-Plate 316L Stainless Steel Fabricated Via Narrow Gap Laser Wire Filling Welding

Role of Ni Content on Microstructure, Mechanical Property, and In‐Site Local Corrosion Behavior of Welded Joints Produced by Laser Welding of Dual‐Phase Steel